How to do geolocation on your phone

WAYS TO SEND GPS COORDINATES FROM YOUR PHONE

Take a look at this post. It’s about how to increase your chances of survival when you need help and you don’t know where you are. You’re lost. You can’t explain your location sane enough to the rescuers because you’re lost. It is much easier and more efficient to send an SMS with your location.

Please teach this basics to your friends, tourists, berry pickers, mushroom pickers, anglers, skiers, snowboarders. especially freeride and ski tourers. Teach it to everyone. Teach your parents and children. You never know where you’ll fall. ❕

Four Ways to Send Coordinates Without the Internet❗Turn on your phone’s GPS.1. It’s better to install beforehand the My GPS position app or its analogue. This app shows your coordinates and altitude. And it is the easiest to send SMS. Go to app, top right Share button, select Messages. Then select the desired contact and send. The message will contain latitude, longitude, exact coordinates, link to Google map. If you have the Internet, you can send coordinates via any messenger, as well as save them on Google disk. This feature is useful to guarantee your safety abroad.

Google Maps. The good thing about the app is that it’s definitely on your phone. Open the maps, click on the point with our location, the line below appears, select Share, then Messaging. The message will include latitude, longitude, a link to a Google map. If you have the Internet. Also on any messenger.

Yandex Navigator. Algorithm as in Google. Go into the application, press the point with the position, select Share, then Messaging. In the message will be the latitude, longitude, a link to a Yandex map.

Maps me. An indispensable application for travel, because the maps work without the Internet, if they are pre-loaded. The algorithm is the same. Go in, hold the point, select Share, then Message. The message will only contain a link to the map, but in a pinch that’s not bad either.

The following methods will only work if there is Internet ❗ Almost any messenger you can use to send your Geo Data (Instagram does not have such a feature). In the Select File to Message menu, select Geodata/Location. If you have a weak internet signal, it’s best to use WhatsApp.

There are probably more options that I don’t know about, but that’s more than enough.Practice each option at home, it should take as little time as possible in case your phone is about to go dead.Before you travel take care about the positive balance on your phone, and also check the website of the service provider for coverage in the area where you are going to hike. you should know if you will have a connection there or not.Think at least two steps ahead.

Please spread the word so that as many people as possible know how to send their coordinates if necessary.

How to do geolocation on your phone

Navigation in your device is installed by the manufacturer. In order to use it, it is enough to activate the option in the settings.

The function works by connecting to a satellite or nearby base stations. Your smartphone finds beacons to receive a signal, transmitting information about where it is.

Modern mobile devices are compatible with all existing navigation systems (GPS, GLONASS), regardless of the region. The main task of geolocation in Android phones is to create your own route. You can use your Google account or third-party programs from the official market to implement it.

How to enable geolocation on Android

Some applications and programs automatically propose to enable the coordinate determination system after installation, for example, Photos, Instagram, Tinder, Maps. You just need to click on “Allow” and the function is activated. If you need to enable the feature yourself (manually), follow these instructions:

  • Open the “Settings” menu.
  • Go to “Security and Location.
  • Open the “Location” section.
  • Move the switch to the On position (just swap it to the right). The switch should light up, indicating that it is active.
  • On newer models of phones, there is a quick settings panel (usually by swapping the top panel down).
  • Locate the icon with the GPS signature and activate it.

If you own an Apple phone, you can activate geolocation as follows:

  • Go to phone settings.
  • Open the “Privacy” or “Privacy” section.
  • Then click on “Geolocation Services”.
  • Here you need to toggle the switch to the On position opposite the programs that support location data.
  • When you first turn on applications that use GPS, you will be prompted to activate geopositioning.

Modes of operation

There are several sources of information to track the position of the device in space. When you activate the function, you will be prompted to select one of three modes:

  • By all sources. The preferred option, in early versions of the Android operating system was called “High Accuracy”. Offers maximum precision in determining the location of the device, using all available tools for geo-positioning. There will be data collected from the mobile operator, from GPS satellites, information via Bluetooth and Wi-Fi channels (if enabled).
  • By network coordinates. Early versions of Android called Battery Saving Mode. This feature uses only the data from the cellular operator or wireless networks for tracking. Economical mode is called because GPS is deactivated and does not consume battery power. This helps the user to extend battery life and save battery life.
  • By GPS Satellites. In earlier versions of Android is called “By Device Sensors. Only the data from the GPS beacon is used for geolocation. Information from wireless networks, mobile operator will not be taken into account.
See also  Find a Samsung phone by account

Location history and geodata transfer

In the “Location History” menu you can activate the recording of your routes, places you have visited and places of interest. The data is stored on Google servers, and can be viewed through an account in that system on “Google Maps. To do this you will need to open the section called “History”. Before that you need to sign in to your Google account at least once from your device.

If you want your relatives or friends to have access to your location, you must add users in the “geo-transfer” section. They will have access to information about your movements and actual location in real time. Trusted users will be able to track their movements, too, through “Google Maps” from the “Show where I am” section.

How to set up geolocation on Android

If you open the “Mode” section, you will see three possible modes of geolocation. Let’s see each of these modes in details.

  • Mode “By all sources” (in older versions of Android this mode was called “High Accuracy”). The most precise geolocation mode. If you turn on this mode, all the information available on the smartphone will be used to determine your location. These are data from GPS satellites, data from mobile operator, as well as data obtained through wireless networks Wi-Fi and Bluetooth.
  • Mode “By network coordinates (in older versions. “Battery saving”). This mode uses only data from the mobile operator and wireless networks (Wi-Fi and Bluetooth). While the GPS module does not work and does not consume battery power. Turning on this geolocation mode allows you to save battery power and extend the battery life of your device.
  • By GPS satellites (in older versions. “By device sensors”). Geolocation mode that uses only data from GPS module. In this case, the information from the mobile operator and wireless networks is not taken into account.

If you return to the “Location” section of the settings and scroll to the bottom, you can find a couple of interesting features there. These are “Location History” and “Geodata Transfer”.

If you open the “Location History” section, you can enable or disable the recording of the history of your movements with your Android smartphone. The history is stored on Google servers, and can be viewed on the Google Maps site in the “History” section. information about this feature you can get in Google help.

And you can add Google users who have access to your location data in the “geo-transfer” section. With this access, your movements can be tracked on the site “Google Maps” in the section “Show where I am. You can read more about this function in the Google help.

Second method

There is another easy way. Call up the curtain, find the “Geolocation”, “GPS” or “Location Data” button and click on it.

If you press and hold down the button, a menu of geolocation settings opens. So, here you can select the location mode. Take a look at the screenshot below. only Wi-Fi and mobile networks are used.

It saves on battery power, but it is much less accurate at showing your location. Better to use the first option. with GPS support.

Evaluation of the Fake GPS Location app

Our assessment

Fake GPS Location with its simplicity and functionality certainly leaves the competition far behind. Our evaluation is good!

How to change your location on your Android phone. Are you sure you’re being spied on? precisely track your location, using your Android phone, then you can greatly confuse the traces and hide your true location!

In a previous article I told you how you can easily and simply spy on a person. if he has an Android phone or iPhone. In this article I will tell you how to hide your true location, so no one will know where you are in a couple of clicks!

Spoofing your location on Android

First, you’ll need to install a special app, run it, and provide the necessary permissions:

After that on Android you need to activate the hidden section in the “For Developers” settings. Read more about how to do it in the article “Debugging via USB” or watch the video below.

Now in the “Developer Menu” you need to find “Select applications for dummy locations” and specify

geolocation, your, phone

Now go back to the main “Settings” menu of Android and then “Location” (in MIUI “Advanced Settings”-“Privacy”-“Location”) and move the location definition to “By GPS satellites”.

See also  How to connect the Internet on the Samsung Galaxy phone

Next, go to the Fake GPS app, point to the location where you are supposedly and click “launch”.

Now those who spy on you won’t know where you really are!

September 26, 2014

The settings that are used for debugging and for app development are hidden in your phone. hidden in the truest sense of the word. Many of us go to the appropriate section of the menu to start USB debugging or switch to the working ART module, but beyond that, there’s a whole list of settings. You’ll never need most of it, but isn’t it interesting to know what’s hiding in the bowels of your device?

“Unlocking” the developer features on your phone

As stated above, these functions are originally hidden. It makes sense, because they are easy to find and most people simply don’t need them. To get to them, go to “About the device” and look there for the “Build number” item. After five quick taps, a dialog box appears. the device now considers you a developer. Just try not to mess anything up, okay? Well, or do whatever you want. also an option. One way or another, the ability to make your phone stop working is always there.

Now let’s take a closer look at the functions offered.

Settings

  • Create an error report. Tap here to send the appropriate message to where you want. The device prepares the necessary files to send, which takes a couple of minutes, after which you see a notification. If you swipe it, the process stops, and if you tap it, the message is sent.
  • Backup password. Allows you to use ADB to back up and restore applications and related data to your computer. Data backup requires a password, and without it the data cannot be restored.
  • Active mode. Checking this option allows you to keep the screen working while you connect the phone to your charger or computer via USB. Don’t use this item unnecessarily, as it’s a surefire way to burn out your screen.
  • Selecting a working module. This is where you can choose between Dalvik and ART. The latter is still in test mode. this is clearly not something we will see in Android L. It has a real antagonism with some phones, so it’s worth checking with the appropriate forum about your device model.
  • Turn on the HCI Bluetooth transaction log. Sometimes a developer or security professional needs to capture and analyze Bluetooth HCI packets. Turning this on puts them in a file that is in the device’s internal memory (/sdcard/btsnoop_hci.log) for recovery. You can then analyze them with a program like Wireshark.
  • Process statistics. All you need to know about the processes running on your device. Tap here, and then on one of the items. To the average user, this is just a bunch of numbers, but to a developer, it can be very useful.
  • USB Debugging. What allows your phone to communicate with your computer using the Android Debug Bridge (ADB). This is required to use DDMS or ADB commands.
  • Revoke USB debugging authorization. When debugging with your computer for the first time, you need to authorize it and set a couple of keys. This setting cancels the action and prompts you to do it again.
  • Error Reports. Enables the option that becomes visible when you hold down the power button to collect and send an error report. Very useful if you are testing something.
  • Fictitious locations. This setting allows you to manually set location information, making your phone think it’s there when it really isn’t. Aside from cheats for Forsquare, this is useful for apps that use location information.
  • Debugging application. This setting allows you to select an app to debug. You don’t need to actually connect to the debugger, but if you enable it, you won’t get error messages when you stop at a breakpoint. If you don’t know what this means, then you never needed this setting and never will. It is designed to work with the developer tools to make sure that the application works correctly.
  • Wait for the debugger. This item stays inactive until you select an application to debug. When it is installed and selected, the setting simply does not allow the selected app to start until the debugger is enabled. Another item that is needed by developers, but useless for most users.
  • Check for USB. Allows Google to scan apps you have installed via ADB for malicious behavior. Good thing.
  • Show touches. By selecting this, you’ll see a visual effect that confirms you’ve registered a screen tap.
  • Pointer location. This setting places a line at the top of the screen that displays the coordinates of the point on the screen that was last touched.
  • Show screen updates. Makes the edge of the “window” flash when there is a context update. Irritatingly annoying.
  • Show layout borders. Marks the edges of elements in the dialog box so you know where to tap to activate it. Try it and turn it off immediately.
  • Writing from right to left. Change the screen orientation to support right-handed languages
  • Window animation: scale. Sets the speed of the window animation. The smaller the number, the faster.
  • Transition animation: scale. Sets the playback speed of the animation when transitioning. Again, the smaller the number, the faster.
  • Emulation of additional displays. This setting allows developers to simulate different screen sizes. Not the most reliable thing.
  • Rendering is forced. Force applications to use hardware 2D rendering if they have been written to not use it by default. Works wonders sometimes. Sometimes sends everything to hell. Be vigilant.
  • Show window updates. With this setting, any rendering done by the graphics subsystem gets a red backlight.
  • Show hardware updates. Highlights hardware levels in green on refresh. You can read why here http://www.curious-creature.org/2013/09/13/optimizing-hardware-layers/.
  • Debugging the overlay. Overlay happens every time the application asks the system to render something on top of something else. This setting allows you to see when and where it happens, so you can see what the problem is.
  • Enable 4x MSAA. This setting forcibly enables multiple sampling anti-aliasing (MSAA). As with any other graphics gas pedal, the more anti-aliasing, the better everything looks. But the speed is slowed down by this.
  • Strict mode. This setting causes the screen to flash when the application uses the main thread to perform a long and intensive operation.
  • Display CPU usage. Places a small window in the upper right corner with information about the CPU and its usage. Fun toy.
  • GPU processing profile. This setting can either draw a graph on the screen or write it to a file. Graph. a visual representation of the workload of the graphics adapter. Another thing that’s interesting to look at.
  • Turn on OpenGL tracing. A setting that lets you keep track of OpenGL bugs and places them in a special log file of your choice. Nothing worth touching for most users.
  • Don’t save operations. This setting destroys any application as soon as you close its window. No good can come of this, no matter what they say on the forums.
  • Background processes. Allows you to set the number of processes that can simultaneously run in the background. Another thing most of us shouldn’t touch too often. If it’s even worth it.
  • Show all ANR. This setting causes all processes to show an “Application not responding” message if the application hangs, enables background processes that are not started by the user. Useful if one application interferes with another.
See also  How to install a call on the iPhone without a computer

What it is

GPS geo-referencing is a system that determines the location of your device on the Earth’s surface. The main function is to build a route to the selected point. Your device communicates with the satellite or nearest cellular tower, finds beacons to receive a signal, receives information from them, and transmits its position. Modern phones work with all available navigation systems without reference to the country. GLONASS, GPS, Deidou (China) are used to work with GPS.

Open the curtain for quick access to the main functions of the smartphone. Slide your finger down the screen from top to bottom. Activate the item. Check that the function is activated. Pressing and holding the button opens a menu with settings. Select Position Detection Mode. To define it more precisely choose the variant as on the screenshot.

Activate through the settings

To turn on geolocation, go to: Select: Next: To turn on geolocation, turn the switch to the active position next to “Data Access.

Activate in the application

Open on your phone, the application. For example, Yandex.Maps. Select: Turn on geolocation. It will become available for other applications. Location is disabled separately for each application.

Activate precise location

Besides information transferred to the operating system and software by the GPS sensor described above, data received from mobile networks, from Wi-Fi access points and via Bluetooth play an important role in the process of fast and precise determination of the Android device geo-location. To achieve the maximum level of efficiency of “Geolocation” on your device you should allow this module to operate with the specified information.

    Move to the Android options section called “Location. This can be done in different ways (one or the other is available depending on the version of the mobile OS and the version of its interface)
    Swipe down from the top edge of the mobile device display to open the quick access panel, look for the “Geolocation” icon (possibly. “Location”, “GPS”) and long press on it.

Move the ” Precise Location Detection” switch to the “On” state, then go back to the “Back” state.

Special Software

There are many apps in the Google Play Market to determine and transfer the geolocation of your Android device. Almost all of them show ads, but there may be some additional options that you might find useful. Consider this method on the example of the “My Location” application.

    Launch the app and allow it to access information about the location of the device.

Call the context menu, tap “Share,” and send the link. You can open it with Google Maps, or with the same app, if it’s installed.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE