How to remove cover Sony Xperia
Smartphones Sony Xperia (Sony Xperia) are rightfully very popular among fans of Sony. In addition to the well-known name, a large number of advantages contribute to this, such as a unique and interesting design of devices, high-quality materials used for the manufacture of the case, powerful filling, the use of the best components and many others.
The owner of a Sony Xperia smartphone may need to remove the back cover for a variety of reasons, whether installing or replacing a SIM card, replacing a battery, installing a memory card, performing a Hard Reset, or replacing the back cover itself. In any case, opening the cover of the smartphone is indispensable.
In fact, Xperia. This is a common brand of Sony smartphones, under which many completely different mobile devices are produced from 2012 to the present. The housing designs of Sony Xperia phones are sometimes significantly different from each other, so if you have a need to remove the back cover from your Sony Xperia phone, you first need to clarify the model name of your smartphone. Below are ways to open the covers of the most popular models released under the Sony Xperia brand.
It should be noted that all disassembly operations of the mobile device should be carried out very carefully, as there is a risk of damage to the parts of the phone and, as a result, loss of warranty. All actions you perform at your own peril and risk. In order to better understand the process of removing the back cover, there is a for almost every smartphone model that shows the sequence of actions necessary to open the cover and further disassemble the mobile device. Theses are best watched in HD mode, expanding them to full screen, so as not to miss a single detail.
Tool. If the description says that it is necessary to use the tool, then as such it is desirable to use metal or plastic spatulas (blades) specially designed for this type of work, but in their absence, in some cases, you can use what is at hand, for example, with a knife blade or a plastic pick.
To quickly navigate the article, select the model of your smartphone:
How to remove the back cover from Sony Xperia Acro S, M2, M4 Aqua, M5, T2 Ultra
The design of the covers of these phones is identical, so the method of removal. same. Using the tool, you should pry the back panel from one of the sides of the device, and then go around its entire perimeter to snap off all the latches.
How to remove the back cover from Sony Xperia Active
We click off the plug of the headset connector, as well as the plug of the system connector. Now, if you pull the plugs up with one hand (the movement is similar to peeling off the film from the display surface), holding the phone with your second hand, the back cover will be removed.
You can watch more details about removing the back cover of the Sony Xperia Active smartphone in this. From it you will also learn how to completely disassemble the Sony Xperia Active.
How to remove the back cover from Sony Xperia Arc, Arc S, Miro, Neo, PLAY, Pro, Ray, Tipo and Tipo dual, V, ZR
In all the listed models of smartphones, the covers are removed the same way. For convenience, you can put the mobile device on the table with the display facing down and hold it with one hand. Using a tool or a nail, it is necessary to pry the back panel from the bottom of the phone in the place where the recess-slot is located, specially designed to remove the cover. After that, the back cover is easily removable.
How to remove the back cover from Sony Xperia C
Using a tool or nails, sneak off the bottom of the lid, then, holding it with your hand, snap off the sides of the lid. After that, the back panel is finally disconnected from the smartphone case.
In more detail, the process of removing the back panel of the Sony Xperia C phone can be seen in the next. In the continuation of it, it is shown how to disassemble the phone for subsequent repair.
How to remove the back cover from Sony Xperia C3, C4, T3
All of these phone models have the same back-panel opening sequence. First you need to open the cover of the SIM card slot. Next, using the tool, you need to pry the cover around the entire perimeter, starting from the bottom of the phone or the place of installation of the SIM card. After that, it is easily removed.
How to remove the back cover from Sony Xperia E, S (SL), Sola, U
In these models, the rear panels are removed the same way. Holding the smartphone case by the bottom, you need to slide the cover up, after which it is disconnected from the phone.
How to remove the back cover from Sony Xperia E1, E3, E4, J, L, M, SP, T (TX)
The design of the rear panels of these phones is very similar, so the way to remove them is the same for all models. To open the cover, you need to pry it with your fingernail from the bottom corner (in many models on one of the bottom corners there is a nail recess specially designed for easy removal of the back panel), after which the back cover can be easily removed. In some models, the cover is easier to remove if you start to pry it around the Micro-USB connector, for example, this is true for the Sony Xperia E3 smartphone.
If you still have any questions about removing the rear panel, see the followings. From them you will also learn how to completely disassemble your smartphone.
How to remove the back cover from Sony Xperia go
First you need to open the covers that cover the connectors of the phone. Then, using a tool or nails, it is necessary to pry the cover off one of the sides, and then gently snap it around the entire perimeter of the smartphone case.
The process of opening the cover of Sony Xperia go smartphone is shown in the next. Further it shows how to completely disassemble the Sony Xperia go.
How to remove the back cover with Sony Xperia ion
The smartphone of this model is equipped with a metal back panel. To open it, first of all, you need to remove the small overlays in the upper and lower parts of the phone. To do this, they should be shifted (upper pad. Up, bottom. Down). The smartphone should be taken with both hands on the back cover to itself, then rest your thumbs on the cover plate and try to move it, helping yourself with the tool if necessary. Then you should remove the sticker located on the bottom plate. Using a PH000 screwdriver (a small Phillips screwdriver), unscrew the central screw located under the removed sticker and four screws located on the side faces of the phone. Using the tool, snap off the back cover, starting from the bottom left corner.
The following demonstrates the sequence of actions for removing the back cover from a Sony Xperia ion smartphone.
How to remove the back cover with Sony Xperia mini and mini pro
On the left side of the phone there is a special recess for convenient removal of the cover. Holding the smartphone with one hand, with the fingernail of the thumb or forefinger of the other hand, click the back panel at the location of the indicated recess.
The below shows how to open the cover of Sony Xperia mini and mini pro phones and completely disassemble them.
How to remove the back cover from Sony Xperia P
First, use the Torx T5 screwdriver to unscrew the two screws located at the bottom of the sides of the phone. Next, with the help of a tool, we pry off or simply remove the upper cover with our hands. Then, use the Phillips screwdriver to unscrew the two screws located under the top plate. Now just remove the smartphone cover from the case.
The whole sequence of necessary steps to remove the back panel of the Sony Xperia P smartphone is contained in the next.
How to remove the back cover from Sony Xperia Z, Z Ultra, Z1, Z1 compact, Z2, Z3, Z3 compact, Z3 (Z3 plus)
The cover in these phone models is glued to the body of the mobile device, so removing it may only be necessary when repairing the device. To remove it, it is necessary to soften the glue by heating the rear panel around the perimeter with a building or soldering iron at a temperature of 150 degrees Celsius. At home, you can try to do with a conventional hairdryer, operating in maximum heating mode. Next, you should pry the cover with a tool around the entire perimeter and it will be removed.
How to remove the back cover from Sony Xperia ZL
First you need to manually open or with the tool a small compartment cover for installing a SIM card and a flash card located on the back of the phone. Next, we bend or remove the protective sticker and unscrew the two screws located under it with a Phillips screwdriver. Slightly prying the back panel with a tool or fingernail, remove it from the smartphone case.
For more information on how to dismantle the back cover of Sony Xperia ZL phone and completely disassemble the mobile device, see this.