How to connect Xiaomi air 2

Table of Contents

Xiaomi Mi Air 2 SE: how to connect new ones, and what to do when they stop connecting

including because this model is also initially focused on working both with smartphones of the native Xiaomi brand and other Android models, and with the iPhone.

how to connect Xiaomi Mi Air 2 SE TWS headphones to smartphone or tablet

This means that the Mi Air 2 SE TWS model is connected to an iOS or Android device as follows:

  • if the headphones are brand new (i.e. just out of the box and have never been connected), then before the first connection it is recommended to charge them completely (i.e. put them in the case and connect it to the USB port of the computer or charger via cable) or, if time does not allow, leave them for at least 10 minutes (and during this time you must not remove the headphones from the case);
  • then we take out the charged Xiaomi Mi Air2 SE from the case, after which the headphones should turn on and switch to pairing mode automatically (and if your Xiaomi smartphone with MIUI and Bluetooth is not disabled, it will also see the headphones itself, which will be reported immediately relevant notice);
  • turn on the Bluetooth module of the smartphone (Bluetooth Settings On);
  • in the list of detected devices we find and tap Mi Air 2 SE (if the system requires a code, enter 0000 i.e. four zeros).
  • firstly, Xiaomi Mi Air 2 SE can remember the last Bluetooth pair, that is, the smartphone or tablet that was last connected to is automatically found by the headphones;
  • secondly, in order for the headphones to connect to the smartphone / tablet automatically, just open the case cover;
  • Thirdly, the following Xiaomi models currently support the headphone detection notification function:

How to reset Xiaomi Mi Air 2 SE headphones

This is for the case when, during operation, the smartphone stopped seeing the headphones, or they do not connect, or do not play, or only one plays. Problems like this happen sometimes.

At the same time, if the Mi Air2 SE has not been beaten, dropped or bathed for a long time, then in the vast majority of cases this kind of trouble occurs due to a software failure. In other words, the headphones turned off.

Therefore, the problem can be fixed in the standard and most effective way, namely by the so-called “hard reset” of the headphones, i.e. forced reset of their software to factory settings.

Xiaomi Mi Air 2 SE: feel the pain

Hello everyone, today I want to tell you about one of my worst purchases of TWS headphones for my money, namely Xiaomi Mi Air 2 SE. These are the first headphones in my memory that I could not use for a week, why?. more on that below.

One of the most important remarks is that there are a lot of fakes, the link where I bought these headphones is below (they were checked on the Xiaomi website)

Specifications:

  • Headphone type: TWS
  • Connection Type: Bluetooth 5.0
  • Supported codecs: AAC, SBC
  • Purpose: For smartphone and player (with Bluetooth support)
  • Emitter: Dynamic
  • Headphone frequency range: 20. 20,000 Hz
  • Presence of a microphone: There are 2 microphones, for noise reduction
  • Control: Touchpad
  • Impedance: 32 ohm
  • Protection: No
  • Earpiece weight: 4.7 grams
  • Capacity, mAh: 40 (headphone), 250 (case)
  • Operating time: almost 5 hours at 75% volume, with a case. 20 hours
  • Case charging time. 1.5 hours (there is a fast charge (in 30 minutes almost 50%))

Equipment:

The packaging is extremely nice from all sides, not the thickest cardboard is used, but it is of good quality. On the front side there is a photo of the headphones themselves, as well as a case. On the back side, all the main characteristics are declared in Chinese, as well as a barcode with the date of manufacture of the headphones.

The kit itself is the minimum required. a case, headphones, instructions in Chinese, as well as a decent quality Type C cable

Appearance and ergonomics:

One of the most pleasant moments of the headphones, the case is relatively large in area (54×54 mm with rounded edges), but rather narrow (24 mm), which makes it great to fit into any s (comparison with tronsmart onyx neo in the photo). The case is made entirely of white matte plastic, which has good features: tenacious, pleasant rubberized surface is not easily soiled. There is 1 LED notifying about some functions (charging, case open indication, headphone charging). The closing mechanism is made with high quality, there is a minimum backlash, which during the operation (a week) did not loosen even on slips (I took out the headphones 30-40 times exactly a day). The hinge has a clear move, the lid opens with a fairly small effort (magnets with good magnetic properties are used), if you get used to it, you can safely open it with one hand (pick up the case and turn the notch to open to the middle finger and open with the middle finger). The earphones are attached with a magnet, the fit is good, they are taken comfortably, they have never fallen out during use. At the back is the input for charging (Type-C). As a result of the case. great, 5/5

And now to the barrel of honey a huge fly in the ointment. the earpiece itself. Made from the same plastic as the case, which is good. Not just a minus, but a huge minus. the size of the earpiece. It is simply huge, which is why during operation there are problems not only for people with a small ear canal, but also with an average one. My girlfriend cannot wear them at all, because they simply do not fit into the ear, I can. but they cause incredible discomfort already during landing, it is impossible to stay in them for a long time. When worn for more than 30 minutes, it already causes pain in the ear canal, I assumed that the peculiarity of the structure of my ear. but no, as I let my friends use it. a similar problem. ergonomics, they not only significantly lose to Apple Airpods, but also bring pain to their owner

Another minus is touch control. The panel is responsible for turning on / off / connecting to the device, calling the voice assistant, as well as answering the call when pressed or pausing / playing music, depending on the situation and which earpiece to control. The following commands to manage:

  • Accept / end a call. double-tap any of the headphones.
  • Pause / play music. double-tap the right earbud.
  • Calling the voice assistant. double-tap the left earpiece.
  • When using one left earbud, double-tap does not call the voice assistant, but pause / play music.
  • Switching tracks, increasing / decreasing the sound volume is possible only through a smartphone.

For a week of operation, I still didn’t get used to the controls, before that I used Fivi and Tronsmart, where the panel works in most cases. Everything is much worse here, the probability of triggering is about 20-30%, which is often annoying.

Communication and microphone:

For the first connection to the phone, you need to hold down the touch surface while the headphones are in the case for 7 seconds, after which you can connect to the headphones, this is not required in the distance. Connecting to the phone is very fast, the connection itself is good, no breaks or loss were detected during use. The microphones are good, the noise cancellation works well, especially including the price. In the room you can hear very well, on the street. naturally worse, but it’s an order of magnitude better than other manufacturers offer for a similar price. The interlocutors did not complain about the sound quality under the comfortable conditions described above, I heard the interlocutor well, despite the fact that the sound isolation in the headphones is mediocre. As a result, it is very pleasant to use as a headset.

autonomy

Autonomy. I have a record holder. they hold on a single charge for almost 5 hours at 75% volume, given that the case will charge them from 0 to 100% at least 4 times. the result is excellent. There is a quick charge of the case, in 30 minutes. 50%, a full charge takes about an hour and a half, headphones. a similar one and a half hours.

Sound

I used them with a Lenovo Z5S smartphone, used it with the AAC codec. The sound itself causes an ambiguous impression, since other people said 2 opposite opinions: “TOP FOR YOUR MONEY IS XIAOME!!” and “Complete rubbish”. Do not forget that these are earbuds, because of which, in any case, the sound will be different. Is it good? Probably not, because the sound will depend a lot on how you place them. In general, I can single out the following: moderately detailed, high frequencies are very strongly raised, sonorous (but there is no strong discomfort), medium frequencies are the best implemented, very good, which is why, in particular, the interlocutor can be heard well during a conversation, low frequencies are present, but the most accurate word that describes it. thumping, no detail, bass for the sake of bass, if you place the headphones deep in the channel. the effect is enhanced. Not bad for audiobooks, or pop music, nothing more, although most people will find them quite good.

conclusions

Are Mi Air 2 SE good. rather not, they are presentable, have a very cool case, good sound for earbuds, one of the best noise reduction in its price category, excellent autonomy, but at the same time, the design of the headphones themselves is strange, namely the “rod”, terrible ergonomics of the headphones, which cover all the advantages of the model, which is why their use will most likely bring physical pain.

Compound

Connecting with new devices

Place the earbuds in the charging case without closing the lid, hold your finger on the touch area of ​​either earbud for 3 seconds, then release. The white light of the headset will flash and the headset will enter connection standby mode.

Activate Bluetooth, on the device you want to connect the headphones to, start searching for new devices and select “Mi Air2 SE”, if necessary, you can use the password “0000”.

Quick pairing with Xiaomi phones

Place the headset in the charging case, close the lid and place it next to an unlocked Xiaomi phone with Bluetooth turned on, open the lid of the charging case and follow the instructions on the phone screen to connect the headphones

Important. Update your phone software to use the Quick Connect feature. Only certain phone models are currently supported

Shutdown

When Bluetooth is turned off on the device or the headphones leave the coverage area, the headphones automatically enter connection standby mode. If no device is connected within 5 minutes, the headphones will go into sleep mode.

Auto connection

If the headphones are in the charger when you open the cover, the headphones will automatically connect to the last device they interacted with. If no devices are connected, the earbuds will enter sleep mode after 5 minutes.

Tip: If your headphones cannot automatically connect to your device, you need to manually pair them in your device’s Bluetooth settings

Reset Headphones:

Place both earbuds into the case without closing it

Press and hold the touch area of ​​both earbuds at the same time for 7 seconds. The indicators on the headphones will turn white.

Release the headphones. The connection history is cleared, the headphone lights are flashing and the headphone is in pairing mode.

Important. The device uses a 2.4GHz frequency to connect, in places where there is strong signal interference, there may be an interruption in communication or silence in the headphones

Air 2 Se connectivity is standard, like other bluetooth devices. When opening the cover on the owner’s smartphone, the pairing window is displayed.

You can also check the battery charge. Xiaomi initial connection:

  • activate headphones;
  • activate the Bluetooth function on your smartphone;
  • start searching for devices;
  • find the headphones in the list of found ones;
  • start pairing.

Further connection of Air 2 Se occurs automatically.

Nuances of use

The main feature of Xiaomi Mi Air 2 headphones If it is using with the Xiaomi app, you can customize the headphones for yourself and change the modes of the right and left gadget.

Functions

IPX5 protection is the standard protection of earphones against water and dust.

It is not recommended to submerge the device in water.

Headphone control

Alas, there are big problems with the management of Mi True Wireless Earphones 2 Basic. There are very few gestures, even the volume or switching between songs is impossible.

Double clicking on the right earbud allows you to play/pause or answer/end a call. Double-tap the left earbud: to answer/end a call, call the voice assistant, or play/pause in mono.

There are very few features, but the automatic pickup detection is nice. The music will immediately stop, as soon as you take out one of the headphones and put it back in, the song will start playing again.

Management and firmware

Xiaomi Mi Air firmware is updated along with the release of new features.

it is better to run the firmware from specialists so as not to damage the device.

The update happens several times a year while the company studies the feedback received.

You can also find out about new functions in the application or on the official website of the company.

As with other in-ear headphones such as Airpods, the comfort of use depends on the anatomy of your ears. There are no different sizes of rubber earphones, Xiaomi Mi True Wireless Earphones 2 Basic will fit you or not, otherwise it will not fit into the ear canal.

perhaps Mi True Wireless Earphones 2 Basic fit too loosely in the ears, at any time there is a risk of them falling out. Also, if you don’t insert them all the way, the sound will be thin and weak. In the case of headphones of this type, in order to obtain the best sound quality, it is necessary to ensure that the “buds” completely cover the ear canal. Achieving this goal with Xiaomi Mi Air 2 is not easy.

See also  How to transfer data to Xiaomi SD card

Equipment

Xiaomi Mi Air 2 Se is sold in a standard package reflecting the functions and features of the gadget.

Xiaomi Mi True Wireless Earphones 2 Basic offer the opportunity to listen to music in good quality, but only if they fit well in your ears. Otherwise, you will be very disappointed with this model.

It has a stable Bluetooth connection, quality microphones and long battery life. The design is a matter of taste, for many the case will seem too long, but there should be no complaints about the build quality.

Unfortunately, the control is implemented very poorly, only double-clicking on the surface of the case is supported. You cannot change the volume or select a different track at headphone level. On the other hand, it has automatic capture detection and pop-up function for Xiaomi smartphone owners.

Is it worth buying?

Of course, the TWS Mi True Wireless Earphones 2 Basic headphones have some drawbacks, but given the price of 1200 rubles, they are insignificant. If the shape of the Xiaomi Mi Air 2 headphones fits your ear canals, this model will not disappoint you.

Mi True Wireless Earphones 2 Basic TWS review – video

Affordable Xiaomi TWS headphones Design and ergonomics90 / 100Comfort and comfort85 / 100Communication and connectivity95 / 100Control and software80 / 100Sound quality90 / 100 Battery life and charging95 / 100Total 89.2 similar to Airpods, take a look at the Mi True Wireless Headphones 2 Basic. They offer good build quality, connectivity and clear sound.

Autonomy Mi True Wireless Earphones 2 Basic

Xiaomi does not tell us the battery capacity of Mi Air 2. During tests, one battery charge lasted approximately 4 hours of listening at a volume level of 50-70%.

The charging case also provides three more full refills. Thus, the total battery life is between 16 and 20 hours, which is not bad. It took almost an hour and a half to restore the power supply of the case and headphones to 100.

CallDouble-tap one of the earbuds to answer or end a call.

Play/Pause While using both earbuds: Double-tap the right earbud to play/pause music. Removing one earphone will automatically pause the music. While using one earphone: Double-tap the earpiece to play/pause music.

Notes: 1. The voice assistant function requires activation in the device settings. 2. Use the app to set up the double tap on the earphone.

Voice control

Program activation will be available after successfully pairing the headphones with a smartphone via Bluetooth.

Additional voice commands will be added as the headset firmware is updated.

Music playback / standby mode Voice assistant. Voice assistant activation

Music playbackNext track. Skip to next trackPrevious track. Skip to the previous track

Connecting to a new device

✓ Put the earbuds into the charging case, then press and hold the function button for 2 seconds. The indicator light on the charging case will flash white to indicate that the earbuds are waiting to be connected.

✓ Turn on Bluetooth on the source device, find Mi True Wireless Earphones 2 in the device list and connect. If a password is required, enter 0000.

Connecting to a Xiaomi smartphone

To connect the headset to a Xiaomi smartphone, place the earbuds in the case, close the case cover, and then open it. Make sure the Bluetooth function is activated on your smartphone. Follow the prompts on the smartphone display.

Note: Make sure you have the latest MIUI 10 software installed.

Connecting to two devices

✓ Place one of the earphones into the charging case, then press and hold the function button for 2 seconds. Use device A to search and connect to the earpiece

✓ After connecting the first earbud to device A, remove it from the charging case. Now put the second earbud into the charging case, press and hold the function button for 2 seconds. Use device B to find and connect to the earpiece. This will allow you to connect each earbud to a separate device.

Attention: before using this function, you need to clear the connection history of each earphone.

Connection interruption

When Bluetooth is disabled on the device or the Bluetooth signal range is exceeded, the headphones will automatically enter connection standby mode. If the Bluetooth connection fails for 10 minutes, the headset will enter sleep mode. To activate, put your headphones back on and establish a connection.

Automatic connection

If the headset is in the charging case, open the cover of the case and the headphones will automatically connect to the last paired device. If no connection history is found or the headphones cannot connect to any device, they will automatically enter connection standby mode.

Note: If the headphones cannot automatically connect to the device, you must manually connect them to the device through the Bluetooth settings.

✓ Charging Xiaomi Mi True Wireless Earphones AIR 2 TWS Earbuds: The earphones are automatically charged after they are placed in the charging case. ✓ Charging the case: during charging, the indicator flashes red, when charging is completed. burns white.

Note: Before the first use, the headphones are in the off state. To activate the headphones, place them in the charging case, press and hold the function button for 5 seconds. It is recommended to fully charge the earbuds before first use.

Checking the battery level

Checking the headphone charge level

After connecting the headset to a smartphone, the charge level is displayed on the status bar.

Note: The status bar only shows the low battery level of the two earbuds. Some models do not support this function.

Checking the battery level of the case

Press the function button or open the cover of the charging case:✓ The indicator on the charging case lights up white for 5 seconds, indicating that the battery is fully charged. ✓ Indicator flashes red to indicate low battery.

Checking the battery level with a Xiaomi smartphone

After connecting the headset to your smartphone, place the headphones in the case, close the case cover, and then open it. A window will appear on the smartphone display with the level of charge of the headphones and the case.

Note: Make sure you have the latest MIUI 10 software installed.

Those who bought Xiaomi Mi AIR 2 are also watching

Check it out in full. Top wireless headphones from Aliexpress (features, where to buy, specifications). Read more: Rating. Top 30 Wireless Headphones 2022. Buy Headphones

Xiaomi Mi True Wireless Earphones AIR 2 TWS Wireless Bluetooth Headphone Specifications

Model: TWSEJ02JY Net weight: 50g Charging port: Type-C Impedance: 32ohm Input: 5.2V 1.1A Wireless connection: Bluetooth 5.0 Wireless range: up to 10m Charging time: 1h Bluetooth profiles: BLE/HSP/ HFP/A2DP/AVRCP Codecs: SBC/AAC/LHDC Earphone battery life: up to 4 hours Battery life (with charging case): up to 14 hours Standard: Q/WMSX 002-2016

How to connect Xiaomi Mi Air 2 to phone or computer

To ensure that the Xiaomi Air 2 headphones do not crash for the first time, fully charge the headphones and case (see the charging section below). Put both earbuds into the case and close it. Press the side button for a few seconds until the indicator on the case lights up. You do this procedure once to activate the headphones, since they come from the factory in the off state. Now once again hold down the side button for a few seconds until the indicator on the case body starts flashing. Your headphones are ready to pair. On your phone, open the notification shade, press and hold the Bluetooth button until the search box appears. You can go to the settings of this module and through the settings menu. If Bluetooth has been turned off up to this point, click “Enable” or “Enable”. On phones with automatic search, the module itself starts searching for nearby devices and finds Xiaomi Air 2. Otherwise, start the search manually. After pairing, a window will appear with a picture and the name of the headphones, in which you agree to connect. In the list, they may not be Air 2, but Mi True Wireless Earphoness 2, by analogy with the predecessors AirDots Pro, the second name of which is Mi True Wireless Earphoness. The Xiaomi Air 2 headphones have an automatic pairing function, so next time they will connect to your phone as soon as you open the earbud case. Of course, if something does not prevent them from connecting, for example, the Bluetooth module on the phone is turned off or a significant distance from the phone itself. True, the auto-connect function is supported only from the MIUI 11 OS version, which is currently available only for about three dozen smartphones of the Xiaomi brand. Xiaomi Air 2 can also be connected to other devices, such as a computer or tablet with a Bluetooth module. Let’s see how to do it on a PC with Windows 10 operating system. In the notification panel, click on the Bluetooth icon to connect the module. You can also do this in the Start menu, under Settings / Devices / Bluetooth and other devices. Your computer will automatically search for nearby devices. Put the headphones in the case, close it and press the side button until the indicator flashes. When the PC recognizes the headphones, allow the connection if necessary. You can use them.

Charge your Airpods and case

To charge your Airpods, put them in the case and close the lid. 4 Airpods shut down and charge whenever they’re in the case.

You can charge your Airpods (1st or 2nd generation) in the Wireless Charging Case or Airpods Charging Case. If you have the Wireless Charging Case, you can charge wirelessly with a Qi-compatible charger. You can charge either case by plugging it in to an Apple Lightning to USB cable.

  • Airpods appear only when they’re nearby and ready to use.
  • If you don’t see the volume control in the menu bar, learn how to add it.
  • If double-tapping to use Siri doesn’t work, go to Settings Siri Search and make sure that Allow Siri When Locked is on.
  • If you have both Airpods (2nd generation) and Airpods (1st generation), make sure that you keep them separate. Your Airpods won’t charge if you put one of each model in a charging case.

Xiaomi Air Dots are stylish and compact wireless earbuds. Good sound quality and an affordable price, which is much lower than competitors, have made this product very popular. The most compact, lightweight and functional, these headphones will allow you to enjoy your favorite music every day.

Control your device

You can use your Airpods to use Siri and control the playback of audio content.

With Airpods (2nd generation), by default, you use Siri by saying “Hey Siri”. And when you double-tap an AirPod, you either play audio or skip forward.

With Airpods (1st generation), by default, you double-tap to use Siri.

Regardless of which model of Airpods you have, you can set each AirPod to do one of these when you double-tap it:

  • Use Siri 3
  • Play and pause your audio content
  • Skip to the next track
  • Go back to the previous track
  • Turn off your audio content

Learn how to choose what you want each AirPod to do when you double-tap it.

Use Siri

With Airpods (2nd generation), you can say “Hey Siri” or double-tap to use Siri. With Airpods (1st generation), double-tap to use Siri.

You can use Siri with your Airpods to ask questions and make phone calls. Siri can also control your music and check on your Airpods. Here are some examples of Siri requests:

  • “Play my Favorites playlist.”
  • Turn up the volume.
  • How do I get home from here?
  • “Skip to the next song.”
  • Pause music.
  • How is the battery on my Airpods?

use the phone

When a call comes in while you’re wearing either AirPod, Siri can announce the call. Double-tap to answer. Later, you can double-tap to hang up or switch to another call.

general characteristics

The Air Dots package includes the headphones themselves, a case with a built-in battery, a USB charging cable, and additional ear pads.

Control elements are represented exclusively by the touch panel. It has LED indicators that turn on when charging or when connected to a device.

The case is made of matte plastic. The top is made of translucent material, so you can always see the charge indicator. The build quality is very good, when closed, the lid is securely fixed by a magnet. Similar magnets are used to secure the headphones in the case. The case itself is compact and fits perfectly in your

Air Dots can be used as a headset (they can work together or separately) due to the fact that each earpiece has a built-in microphone. The earphones sit perfectly in the ears, not too big and do not attract undue attention.

How to charge Xiaomi Air 2

To charge the case, there is a Type-C port located at the bottom of the case. Insert one end of the included cable into this port and connect the other end to a power source such as a laptop or power bank. The case takes about an hour to charge and will last up to 10 hours on one full charge. During charging, the indicator will flash, and when the battery is fully restored, it will light up steadily. To charge the earbuds, simply place them in the case and they will automatically begin to replenish their energy reserves. One charge of the headphones lasts up to 4 hours of their work. The case has a fast charging function, so after ten minutes of being in it, the headset will be recharged so that you can listen to music for about an hour. Neither the case nor the headphones will tell you the level of the remaining charge. However, you can view them on your phone when pairing devices. In this sense, this function completely repeats the original Airpods, and the Chinese Mi Air 2 shows the charge of the case and each earbud separately. You must have noticed that more and more people around are wearing headphones like Airpods and their numerous copies. Therefore, it is not surprising that they are becoming more and more comfortable in terms of wear and control. And Xiaomi’s affordable Mi Air 2 headphones are another confirmation of this. They are easy to operate and do their job well.

Do you have any questions? Leave them in the Комментарии и мнения владельцев and we will try to answer them.

You can listen to music, make phone calls, use Siri, and more with your Airpods.

Listen with your AirPods

When you take your Airpods out of the case, they’re on and ready to use. When you put them in your ears, your Airpods automatically play the audio from your device. If you take an AirPod out, audio pauses. Take them both out and audio stops. If you’re listening with one AirPod and you take it out, the AirPod pauses. If you put it back in your ear within 15 seconds, play resumes automatically.

Airpods are connected to your iPhone and Apple Watch at the same time. Sound automatically switches between them.

Follow these steps to use your Airpods to play audio from a different device or to switch the audio to different headphones or speakers.

On your iOS device

  • Open Control Center.
  • Press deeply or touch and hold the audio card in the upper-right corner of Control Center to control audio.
  • Tap. then choose the device you want from the list. one

On your Mac

Click the volume control in the menu bar and choose your Airpods 2 or other speakers under Output Device.

Before you start

If you have Airpods (2nd generation), you need at least one of these:

  • iPhone, iPad, or iPod touch with iOS 12.2 or later
  • Apple Watch with watchOS 5.2 or later
  • Apple TV with tvOS 12.2 or later
  • Mac with macOS 10.14.4 or later
See also  How to insert a card in Xiaomi

If you have Airpods (1st generation), you need at least one of these:

  • iPhone, iPad, or iPod touch with iOS 10 or later
  • Apple Watch with watchOS 3 or later
  • Apple TV with tvOS 11 or later
  • Mac with macOS Sierra or later

Learn how to set up your Airpods with a Mac or a non-Apple device, like an Android phone.

How to add Xiaomi Mi Air Purifier 3H to the Xiaomi Mi Home app?

How to add Xiaomi Mi Air Purifier 3H to Xiaomi Mi Home app? How to use Xiaomi Mi Air Purifier 3H in Mi Home App? How to find Xiaomi Mi Air Purifier 3H in Xiaomi Home app? How to login to Xiaomi Mi Home app? How to add an account to the Xiaomi Mi Home app? How to activate Xiaomi Mi Air Purifier 3H in Xiaomi Mi App? How to connect Xiaomi Mi Air Purifier 3H to Xiaomi Mi Home app? How to connect Xiaomi Mi Air Purifier 3H to Wi-Fi? How to control Xiaomi Mi Air Purifier 3H with the Xiaomi Mi Home app?

If you recently bought Xiaomi Mi Air Purifier 3H and want to connect and control it with Xiaomi Mi Home App. follow this guide and you will add Xiaomi Mi Air Purifier 3H to Mi Home app in a simple and affordable way.

  • The first thing you need to do is open the Play Store on your mobile.
  • Then find the official Xiaomi Home app and install it. Check if this is an official app provided by Xiaomi and not some third party app provided by other developers.
  • Once the installation is complete, open the app and agree to all Terms and Conditions.
  • Then select the region where you want to use Xiaomi Mi Air Purifier 3H IMPORTANT. If you bought Xiaomi Mi Air Purifier 3H from Aliexpress or other Chinese online store, please select China as the region. Otherwise, Xiaomi Mi Air Purifier 3H may not be able to connect to the Mi Home app.
  • Then allow all permissions. clicking “Select All”.
  • In the next step, the Xiaomi Mi Home App will be able to get the GPS location and manage phone calls.
  • Now click Login.
  • At the moment, click the lock icon to log in via email.
  • Enter the email address and password registered for the Xiaomi account. If you don’t have it, you need to register a new Xiaomi account. Finally, click Login.
  • When you are logged in, select Add device to add Xiaomi Mi Air Purifier 3H.
  • Then turn on Bluetooth to find nearby Xiaomi devices. If the app cannot find it, select it manually from the list of all Xiaomi Home devices.
  • Then follow the instructions displayed on the screen of your mobile device and confirm the work. Finally click NEXT.
  • Choose which Wi-Fi network to connect Xiaomi Mi Air Purifier 3H to. and enter the password for the IMPORTANT router. The Wi-Fi network must be password protected, otherwise Xiaomi Mi Air Purifier 3H will not establish a connection.
  • Now Xiaomi Mi Air Purifier 3H will connect to your smartphone.
  • At this point, you can choose which room to add your Xiaomi Mi Air Purifier 3H to.
  • Now give your Xiaomi Mi Air Purifier 3H a name.
  • Big! Your Xiaomi Mi Air Purifier 3H has been successfully added to Xiaomi Mi Home and you can control Xiaomi Mi Air Purifier 3H with your smartphone.

How to add to Xiaomi Mi Home App?

If this solution helped you, share it with others to help them, and subscribe to our pages in. and Instagram

How to connect Xiaomi Mi Air 2 to phone or computer

To ensure that the Xiaomi Air 2 headphones do not crash for the first time, fully charge the headphones and case (see the charging section below). Put both earbuds into the case and close it. Press the side button for a few seconds until the indicator on the case lights up. You do this procedure once to activate the headphones, since they come from the factory in the off state. Now once again hold down the side button for a few seconds until the indicator on the case body starts flashing. Your headphones are ready to pair. On your phone, open the notification shade, press and hold the Bluetooth button until the search box appears. You can go to the settings of this module and through the settings menu. If Bluetooth has been turned off up to this point, click “Enable” or “Enable”. On phones with automatic search, the module itself starts searching for nearby devices and finds Xiaomi Air 2. Otherwise, start the search manually. After pairing, a window will appear with a picture and the name of the headphones, in which you agree to connect. In the list, they may not be Air 2, but Mi True Wireless Earphoness 2, by analogy with the predecessors AirDots Pro, the second name of which is Mi True Wireless Earphoness. The Xiaomi Air 2 headphones have an automatic pairing function, so next time they will connect to your phone as soon as you open the earbud case. Of course, if something does not prevent them from connecting, for example, the Bluetooth module on the phone is turned off or a significant distance from the phone itself. True, the auto-connect function is supported only from the MIUI 11 OS version, which is currently available only for about three dozen smartphones of the Xiaomi brand. Xiaomi Air 2 can also be connected to other devices, such as a computer or tablet with a Bluetooth module. Let’s see how to do it on a PC with Windows 10 operating system. In the notification panel, click on the Bluetooth icon to connect the module. You can also do this in the Start menu, under Settings / Devices / Bluetooth and other devices. Your computer will automatically search for nearby devices. Put the headphones in the case, close it and press the side button until the indicator flashes. When the PC recognizes the headphones, allow the connection if necessary. You can use them.

Xiaomi Mi Air 2 headphone device

In terms of design, the Xiaomi Air 2 earphones have changed significantly compared to previous versions of AirDots and AirDots Pro. Now these are not plugs, but inserts that have become much more like the original Airpods. Although there are still differences in the headphones themselves and the case. The case is made of matte plastic and has a less streamlined shape compared to Airpods. It has a Type-C charging port on the bottom, and a built-in battery inside to charge the earbuds. The charging contacts themselves can be seen at the bottom in the headphone compartments. On the side of the case there is a button to activate the gadget, pair it with the phone and reboot, and on the side of opening the lid there is a single indicator. The headphones are similar in shape to Airpods, although they have a thicker leg. At the bottom of the leg there are charging contacts and the inscription L or R, indicating the left or right earpiece, respectively. When placed in a case, the earbuds hold well and do not fall out of it, even if you turn over and shake the open case. Both Mi Air 2 earbuds have built-in microphones, so you can talk through two earphones at once or at first one at a time, and after discharging to another. If your conversation drags on for long hours, the ability to talk on any of the headphones will help to charge the second one in the case at the same time. The headset also has indicators and an infrared optical sensor. The latter recognizes whether the earpiece is in the ear or out of it, so when it is triggered, the music is automatically paused. And this is very convenient, because the dropped earphone makes us rewind the training audio or skip our favorite song. On top of the leg of each headphone is a sensor that allows you to control tracks or calls without any button presses.

Instructions in Russian for Xiaomi Mi Air 2 / AirDots Pro 2 headphones. How to connect and charge the headset

The other day, new headphones from Xiaomi entered the market, which joined the ranks of Airpods copies and will easily squeeze out competitors. The Xiaomi Mi Air 2 model is easy to manage, but still requires minimal knowledge of connecting to the phone, charging and mastering the control keys. We will cover all this in this short guide.

Xiaomi Air 2 Headphone Control

  • remove the headphones and they will automatically pause;
  • to resume playback, put on your headphones and double-tap on any of them.

How to charge Xiaomi Air 2

To charge the case, there is a Type-C port located at the bottom of the case. Insert one end of the included cable into this port and connect the other end to a power source such as a laptop or power bank. The case takes about an hour to charge and will last up to 10 hours on one full charge. During charging, the indicator will flash, and when the battery is fully restored, it will light up steadily. To charge the earbuds, simply place them in the case and they will automatically begin to replenish their energy reserves. One charge of the headphones lasts up to 4 hours of their work. The case has a fast charging function, so after ten minutes of being in it, the headset will be recharged so that you can listen to music for about an hour. Neither the case nor the headphones will tell you the level of the remaining charge. However, you can view them on your phone when pairing devices. In this sense, this function completely repeats the original Airpods, and the Chinese Mi Air 2 shows the charge of the case and each earbud separately. You must have noticed that more and more people around are wearing headphones like Airpods and their numerous copies. Therefore, it is not surprising that they are becoming more and more comfortable in terms of wear and control. And Xiaomi’s affordable Mi Air 2 headphones are another confirmation of this. They are easy to operate and do their job well.

  • Make sure the earbuds are in the charging case.
  • Open the headphone case.
  • Press the round button on the back of his case.

Wait for the indicator between the earbuds inside the case to flash white and the Bluetooth pairing is established.

Go to your Android phone’s Bluetooth menu and select the Airpods to pair with. Ready!

How to connect Airpods to Xiaomi

When you turn on the headset, you need to go to the “Search for Bluetooth devices” item on your phone and select the device to be connected so that pairing between devices takes place. Normal activation of Bluetooth will not give a positive result in the connection.

How to connect to Samsung

In the case of Samsung, hold down the button on the back of the case. Search for your headphones among Bluetooth devices. Connect and enjoy your music.

You can expand the functionality of these headphones on Android using special applications. Take the Droidpods app, which offers us a persistent notification showing the remaining battery life of the Airpods and letting us know when it’s time to charge one or both of the earbuds. This application is publicly available on the Play Store for a purchase of only 2.49.

Or the free AirBattery app, which also lets you track the amount of charge on your headphones and case. Another plus of this app is that it can also support other W1 wireless headphones.

Android apps show charge

Should I buy Airpods to use with Android?

Airpods with iPhone work flawlessly, headphones connect instantly, work without interruption, there are gestures. But before buying headphones to pair with an Android smartphone, you need to be prepared that this pair will not work perfectly.

It should be understood that Airpods outside the Apple ecosystem become simple wireless headphones. However, they can be connected to various devices that support the transfer of music and sounds via Bluetooth.

Many users choose Airpods earphones precisely for their convenience in use. Apple developers always try to make the use of their technology as simple as possible. In general, everyone draws a conclusion for himself, counts, in addition to other pluses and minuses, his own. Of course, it is easier to take devices from the same company, but this is not always advantageous for the price.

Unlike the budget Redmi and Mi AirDots earbuds, the Pro models are connected via a case. The case is required to connect with a smartphone, so first of all, charge it by connecting it to a power source via a USB Type-C cable. Also, do not remove the headset from the docking station until it is fully charged.

We put the headphones in the case and close the lid. Now we find the button on the side and hold it down for 5 seconds. The white light should come on. It notifies you that the wireless headset is ready for pairing.

On the phone, open the list of Bluetooth devices available for connection. We are looking for the model “Mi TRUE WIRELESS EARPHONES” and click “Synchronize”. If the system requires a verification code, enter four zeros.

Since the microphones are located in two ear cups, you can talk from both the left and right earphones.

iPhone owners can sync in a similar way:

  • Open “Settings” on your phone.
  • Go to the “Bluetooth” section and move the slider opposite the adapter to the “On” mode.
  • On the case with Airdots, press the button, as mentioned above.
  • Headphones will appear in the list of devices. Click “Connect”.
  • After a few seconds, a notification will appear that the gadgets are paired. After that, take out the earbuds and enjoy the music.

[Tutorial Review] Xiaomi Mi Air2 SE (a.k.a. Mi True Wireless Earphones 2 Basic or Mi AirDots 2 SE)

What to do if you can’t connect

First you need to delete records of previous connections. We “forget” the device in the list of Bluetooth models and clear the application cache. We place the headphones in the charging block and hold the side key for 10 seconds. The headset will reboot and be ready to use from scratch.

A standard reset to factory settings will also help: charge the case, put AirDots there (do not close the lid) and hold the key for 30-40 seconds.

Now you know how to connect Mi AirDots Pro and Pro 2 to Android and iOS smartphones, as well as what procedures will help if synchronization fails.

How to connect AirDots Pro 2 headphones to your smartphone?

It is worth noting that the headphones have different names Mi AirDots Pro 2, Mi Air 2 and Mi True Wireless Earphones 2, but they are the same type of headphones with names for different markets.

  • Put both earbuds into the case and close it.
  • Press the side button for a few seconds until the indicator on the case lights up. This procedure must be done once to activate the headphones, as they are shipped off from the factory.
  • Now hold the side button again for a few seconds until the indicator on the case body starts flashing.
  • Headphones ready to pair.

In the list of available devices, we find Mi True Wireless Earphones 2. Click on this name and accept the pairing request, in which you can allow the exchange of contacts. Regardless of the version of the headphones for the global market and the Chinese market, the name in the list of available devices will look exactly like Mi True Wireless Earphones 2.

After a successful connection, the paired devices menu will display information about the status of the device and its charge level. Headphones are connected and ready to go. With further use, the Xiaomi Air 2 headphones have an automatic pairing function, so the next time they will connect to your phone (if Bluetooth is enabled on it) as soon as you open the case with the headphones. It is no longer necessary to take the earbuds out of the case. The auto-connect function is only supported from the MIUI 11 shell version.

See also  Xiaomi redmi 3 won't boot

You can check the headphone charge in the Smart menu of the Bluetooth background when pairing devices. The function displays full information about Mi Air 2: the charge of the case and the charge of each earbud separately in percentage.

By default, the touch control buttons are assigned the following functions:

When there is an incoming call, double-tap on any earbud to answer the call.

Xiaomi Mi True Wireless Earphones 2 UNBOXING & How to Pair

Double-tap the left earpiece. call the voice assistant.

Double tap on the right earpiece while listening to a track. pause / play.

How to connect Redmi AirDots headphones to a smartphone?

Redmi AirDots is also known as Mi True Wireless Earbuds Basic. Consider connecting two headphones to a smartphone at the same time, as well as the option of connecting one as a mono headset.

Before using the device, you need to remove the protective film from the contact surfaces of the headphones, place them in the case and charge. While charging, the indicator glows red. When fully charged, its color turns white, and after 1 minute it goes out.

To connect, you need a smartphone with Bluetooth enabled and Redmi AirDots headphones. Headphones turn on automatically when removed from the case. Connecting two headphones to a smartphone:

  • remove both earbuds from the charging case and wait 2 seconds until they turn on.
  • after turning on, the left earphone is automatically connected to the right one, the indicator of which starts flashing white.

Moving on to the smartphone: in the Bluetooth menu, search for available devices.

In the list of available devices we find Redmi AirDots_L. This is the left earpiece. Click on this name and accept the pairing request, in which you can allow the exchange of contacts. Depending on the version of headphones: Redmi AirDots or Mi True Wireless Earbuds Basic, the name in the list of available devices may differ. If you have the Mi True Wireless Earbuds Basic version, they will be listed as Mi True Wireless EBs Basic_L. The only difference between the versions is that one is made for the Chinese domestic market, and the second for the Global market. This does not affect functionality or performance in any way. The package and specifications are identical. But the price may vary.

After a successful connection, the paired devices menu will display information about the status of the device and its charge level. Headphones are connected and ready to go. Now, after the first successful pairing, Redmi AirDots will automatically connect to the previously paired device if Bluetooth is enabled on it.

If for some reason you are unable to pair with your headphones, remove the headphones from the charging case and make sure they are turned off. Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (and then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone, if they are there. Then pair again.

  • remove any one earbud from the case, and wait for it to turn on automatically;
  • the headphone indicator first quickly and then slowly starts flashing white;
  • search for available devices in the Bluetooth menu;
  • depending on the earpiece you choose, the device will be called Redmi AirDots_L or Redmi AirDots_R;
  • it remains to click on the name of the device and accept the pairing request.

What to do when the headphones do not pair with each other?

Communication between the headphones can be established by resetting the Bluetooth modules.

  • disconnect both headphones. press and hold the buttons until the red indicators turn on;
  • now hold the buttons again for 30-50 seconds, wait until the headphones turn on. a white indicator should appear, then after another 10-20 seconds the indicators will light up and blink white and red twice (do not release the press) and then blink twice more and go out;
  • put both earbuds into the case;
  • now remove them from the case, wait for the synchronization procedure to complete and reconnect the headphones to your smartphone.

If, after the reset, the smartphone began to see the left and right headphones separately, you need to connect only the right one to the phone, and when it starts playing sound, you need to press the power button on the left. it should connect to the right.

If it doesn’t work the first time, try resetting again. Also, in a pinch, it does not hurt to clear the Bluetooth app data on your device.

Xiaomi Mi Air 2S wireless headphones review

In 2020, another version of headphones from the Xiaomi brand appeared, which was called Mi Air 2S. The peculiarity of the novelty is to minimize the sound delay and install an updated chipset. Let’s see what the device is and whether it differs from the previous model, Mijia True Wireless Bluetooth Headset Air 2.

Kit contents

The gadget is delivered in a cardboard box. Inside it housed the instruction manual, warranty card, charging case with USB Type-C cable, as well as the headset itself.

Laconic design

The case was decided to be made of glossy white plastic. On the outer surface there is a touch panel with which you can switch tracks, turn on / pause a musical composition, etc.

The presence of an infrared module allows you to stop playing the track if the Xiaomi earphone is removed from the ear. The microphone and contact connectors for charging are located on the base.

For the production of the charging case, snow-white plastic with a glossy surface is also used, from which dirt is easily removed. There is a USB-C port at the bottom, a mechanical button on the right side, and an LED on the front panel.

An excellent solution was protection against dust and moisture according to the IPX4 standard. It is strongly not recommended to completely submerge the device under water, but it will withstand rain and sweat.

For the convenience of users, the leg has the inscriptions “L” and “R”, which helps to identify the left and right earphone.

Sound level

The dual-core processor speeds up the audio transfer process. Binaural synchronous transmission technology ensures that the left and right earphones play music in sync. This means that the possibility of out of sync and disconnection of the slave earphone from the master is excluded.

The advantages of the model include full optimization of LHDC decoding, taking into account the features of the user interface of the MIUI firmware. The engineers decided to optimize the sound when using the gadget in conjunction with Xiaomi smartphones.

Owners of Xiaomi smartphones can take advantage of the low latency option, which is relevant when working with gaming and video applications. I wish the feature was available by default. However, the engineers decided that the user should enable it on their own through the MIUI shell settings. Please note that when this option is enabled, the battery charge will be consumed much faster.

Another advantage of Xiaomi Mi Air 2S is the support for XiaoAI voice control, even while playing a musical composition. It uses two built-in microphones.

Responsible for the sound are 14.2 mm drivers in combination with a dynamic driver and a composite diaphragm. Medium and high frequencies are heard perfectly, the bass turned out to be slightly less pronounced.

Active Noise Canceling (ENC) ensures clear communication even in noisy environments, so you won’t hear interference or background noise while talking.

To synchronize with a smartphone, Bluetooth 5.0 wireless technology is used, the range of which is 10 meters. The signal is transmitted stably and steadily.

Battery Life

Increasing the capacity of the battery helped to increase the duration of operation on a single charge. Now this figure is 5 hours. Charging time through the charging case is 1 hour, and its capacity is enough to ensure listening to tracks for 24 hours.

Please note that you can charge your device via a USB Type-C cable or Qi wireless technology.

General impression

The Mi Air 2S TWS headset has an updated chip, 14.2mm speakers and supports AAC, LDHC codecs. This made it possible to achieve a noticeable improvement in sound quality, the severity of the entire frequency range. Speech clarity during a phone call is achieved through noise reduction technology. It is worth noting the convenient touch control, binaural sound distribution. Each earpiece can work individually, and the presence of an infrared module provides automatic pause when the headset is removed from the ear.

Xiaomi Mi Air2 SE TWS: is it worth buying?

June 24, 2020 xiaomi.ukr

On May 19, Xiaomi released a new Bluetooth earphone, Xiaomi Mi Air2 SE. This Bluetooth headset is the third product in the Xiaomi Mi True Air2 Wireless Bluetooth Headsets. An updated version of Xiaomi Mi Air2 S was released not so long ago. Compared with Xiaomi Mi Air2 TWS and Xiaomi Mi Air2S TWS, Xiaomi Mi Air2 SE is only half the price of the first two models. Should you buy Xiaomi Mi Air2 SE? We will share with you a detailed review of Mi Air2 SE TWS that everyone can use as a reference.

Xiaomi Mi Air2 SE TWS Design

Xiaomi Mi Air2 SE charging box has changed the shape of the previous Xiaomi Mi Air2 series, from vertical to horizontal, plain white color, the shape is a bit like a girl’s makeup box.

The Xiaomi Mi Air2 and Xiaomi Mi Air2S charging box is relatively round and rectangular, the Xiaomi Air2 SE Bluetooth headset charging box is square in shape, and the surface still uses matte texture technology, which is smooth and delicate in touch and does not leave fingerprints. There is an indicator light on the front of the charger and a Type-C charging port on the back.

The appearance of the Xiaomi Mi Air2 SE earbuds is basically the same as that of the Xiaomi Mi Air 2S, except that the headphone handle is slightly longer. The net weight of one headset is 4.7g, and the body is small and light.

Like Xiaomi Mi Air 2S, Xiaomi Mi Air2 SE earbuds also use hemisphere design, which helps to better fit the ear canal, making it light and comfortable to wear. Of course, there is also a downside: people easily forget if they are wearing headphones, which leads to accidental loss of the headphones.

Battery Xiaomi Mi Air2 SE TWS

Xiaomi Mi AIR2 SE charging box has a built-in 410mAh lithium battery based on a new generation of low-power chips. According to the instructions, one headset can work for 5 hours. and with a charger, battery life can be extended up to 20 hours. with both single and total battery life better than Xiaomi Mi Air2 TWS. Of course, the real situation may be due to the habit of long or short battery life. In the case of 50% volume, we specifically tested the battery life of one headset, which was about 5 hours.

Xiaomi Mi Air2 SE TWS Sound Quality

Although the price of Xiaomi Mi Air2 SE is only half that of Xiaomi Air2 and Xiaomi Air2S TWS, Xiaomi Mi Air2 SE, as the most important headphone sound unit, not only matches, but continues to be equipped with the same 14.2mm composite moving coil large the same size as Xiaomi Air2 and Xiaomi Air2 S and supports SBC and AAC audio decoding technology.

Xiaomi Mi Air2 SE TWS will be better than Bluetooth headsets that support SBC encoding in terms of Bluetooth sound quality. Of course, there is still a significant gap between AAC and LHDC Xiaomi Mi Air 2S TWS earbuds.

In addition, when encoding AAC audio, it is felt that the sound quality of Xiaomi Mi Air2 SE is slightly worse than that of Xiaomi Air 2S, especially on bass, where Xiaomi Air2 SE has a strong digital sound. Of course, the price of Xiaomi Mi Air2 SE is relatively cheap and our requirements should not be too high.

In terms of latency, the performance of Xiaomi Mi Air2 SE is ok, daily listening to music and watching videos will not experience obvious stuttering and lag, you can rest assured.

What’s more, two high-sensitivity microphones are built into the Xiaomi Mi Air2 SE headset to eliminate background noise and improve the sound quality during a call, even if the sound quality of the Xiaomi Mi Air2 SE TWS headphones is slightly degraded in a too noisy environment.

Xiaomi Mi Air2 SE TWS Control Experience

In terms of user experience, like Xiaomi Mi Air 2S, Xiaomi Mi Air2 SE supports open cover. Therefore, when you open the lid, the headset automatically connects to your phone, and when you put on the headset, you can listen to music immediately. In addition, the logic of the Mi Air2 SE TWS headphones remains unchanged and easy to use: just two clicks on the left headset to wake up the voice assistant and two clicks on the right headset to play and pause music.

Alternative way

If the first method did not help to connect both headphones at once, it is worth doing a complete reset of the headset. This method is universal and can be done for any problems with synchronization.

Mi Air 2 unboxing and review | Mi True wireless earphones 2|How to connect Mi Air 2 with any phone

  • On the smartphone, in the Bluetooth devices section, remove the headset;
  • Take Xiaomi headphones out of the case;
  • Hold both touch pads;
  • The red and white LED blinks a couple of times and goes out;
  • Keep holding the headset turned off;
  • There will be a second “blink” of the red and white indicator;
  • Return the headphones to the case;
  • Take them out and wait a few seconds, the frequent pulsation for both will change to slow only for the right one;
  • Connect your headset to your smartphone.

For clarity, you can watch the video with instructions.

  • Turn on Bluetooth on your phone;
  • We take the headset out of the case;
  • We clamp the external touch panels on both headphones until the white indicators light up, release;
  • The LED on the right starts blinking;
  • In the detected devices section, the right earpiece “Mi AirDots Basic_R” (it is the main one) will be displayed, which itself will connect to the left one;

If the sound comes only from the right earphone, to connect the second one, touch the touch area on the left.

As planned by the manufacturer, when you take out both headphones, they should automatically connect to each other. First, there is a frequent flashing for both, then only on the right headset, the LED pulsation slows down, which means that it is ready for pairing.

Red indicator. the battery is discharged. White. 100% charged.

Connection is the same for all smartphones on Android and iPhones.

Volume cannot be adjusted via touch panels.

Battery percentage can be viewed in the Bluetooth settings.

There will be a female Chinese voice during power on and off, this is normal.

You can use only one earphone, take it out of the case, wait 15 seconds when the fast pulsation changes to slow and connect.

If you take the earpiece out of your ear while playing music, then there will be no automatic pause like in Airpods.

Working hours. 2-4 hours depending on outside temperature. Charger. 40-50 min.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE