Samsung

How to connect Wi-Fi to Samsung TV

What you need to know?

In the process of preparing Smart TV for connection, it is recommended to clarify a number of criteria that will determine how to set up the Internet on a Samsung TV.

  • The presence (absence) of a built-in Wi-Fi adapter. If there is no such module, you will need to ensure its availability and connect via USB (synchronization with the television system will occur automatically).

Watch a video review of an inexpensive Samsung TV network adapter:

It should be borne in mind that when choosing an adapter, you must take into account the TV model, since the compatibility of devices is determined individually.

Samsung LED Smart TV Restarting On Its Own. Wifi Not Working. Samsung TV Support

  • Wi-Fi connection parameters. Here you should take into account the terms of the provider’s tariff plan, signal quality, router functionality, etc. If you plan to view previously downloaded media content (to a computer), it is enough to use WI-FI-D technology This method involves synchronizing the TV with a PC, duplicating the contents of the computer monitor and subsequent viewing of content on the big screen.

Direct activation excludes the possibility of using Smart TV as a device for Internet access and does not allow working with applications. No router is required with this method.

If the TV does not connect to the Internet?

The factors that block the connection and prevent you from turning on Wi-Fi on your Samsung TV are in most cases related to your router settings. This reason is obvious if other devices connected to the router cannot access the Internet.

If the devices used in the wireless network function properly, and the TV cannot access Wi-Fi, then the obstacles are recommended to be removed as follows.

How to connect wireless internet to a Samsung TV

The ability to connect the TV to the Internet significantly expands the functionality of a conventional device for watching TV programs using an antenna. This option of entering the World Wide Web provides access to any media content online. A TV used as a device for connecting to the Internet can replace a computer, since it allows it to perform the same functions as a PC.

How to connect Wi-Fi to a Samsung TV and how to set up Smart TV, we will figure it out in detail in this article.

Set Smart TV settings manually

Before starting to configure the parameters in the TV system, go to the router settings and deactivate the DHCP (Dynamic Configuration Protocol) function. In the TV menu “Network settings” set the parameters of the IP address and IP gateway (the gateway IP corresponds to the address in the router settings. 192.168.1.1).

If your router model is TRENDnet, the IP address is 192.168.10.1.

  • IP address: 192.168.1.102 (you can enter any local address: 192.168.1.103 or 192.168.1.105, for TRENDnet. 192.168.10.102);
  • subnet mask: 255.255.255.0;
  • gateway: 192.168.1.1;
  • DNS server: 192.168.1.1.

Entering the settings manually usually solves the problem of a lack of wireless connection.

Entering the MAC address

In addition to manually setting television parameters, it is recommended to refer to the settings of the router and enter an individual MAC address not only for the TV, but also for other devices connected to the router.

How to set up wifi in Samsung Smart TV

Connection speed control

Data rate drops can be caused by:

  • insufficient functional potential of the router (router replacement will be required);
  • heavy load of the transmission channel (several devices are involved);
  • the terms of the provider’s tariff plan (it is recommended to switch to a faster one).

Checking the connection

If a previously established connection was interrupted for any reason, it is necessary to determine the factors of failure in each direction of device interaction. The solution to the problem should be found in the “Network” section. It is recommended to pay attention to the access channel and IP address in the “Status” field.

Usually, there are two reasons that prevent a stable connection:

  • Errors in the chain: Smart TV. router.
  • Chain failures: router. internet.

How to connect a Samsung TV to a router in case of problems and check the connection, we will consider each example.

Entering the MAC address

In addition to manually setting television parameters, it is recommended to refer to the settings of the router and enter an individual MAC address not only for the TV, but also for other devices connected to the router.

Set Smart TV settings manually

Before starting to configure the parameters in the TV system, go to the router settings and deactivate the DHCP (Dynamic Configuration Protocol) function. In the TV menu “Network settings” set the parameters of the IP address and IP gateway (the gateway IP corresponds to the address in the router settings. 192.168.1.1).

If your router model is TRENDnet, the IP address is 192.168.10.1.

  • IP address: 192.168.1.102 (you can enter any local address: 192.168.1.103 or 192.168.1.105, for TRENDnet. 192.168.10.102);
  • subnet mask: 255.255.255.0;
  • gateway: 192.168.1.1;
  • DNS server: 192.168.1.1.

Entering the settings manually usually solves the problem of a lack of wireless connection.

Connection

To enable the Samsung Smart TV browser, you need to connect it:

  • a local wired network via a twisted pair through a TV router;
  • with a wireless Internet network, that is, directly via WI-FI, if Smart TV Samsung has a built-in WI-FI adapter;
  • using a WI-FI router (USB), setting up a connection through the connections menu, and choosing the desired options.

To find the desired item, you need to go to the Smart Hub by selecting the corresponding key on the control mouse from its menu. “Samsung Apps Store” will provide the option you like.

How to connect samsung smart tv to wifi direct |samsung smart tv wont connect to wifi

connect, wi-fi, samsung

It is more convenient to connect the TV to the Internet via a direct connection or through a router. To do this, it is enough to connect the cable from the network provider to the television “Ethernet” connector. If the type of ISP does not support the direct connection function, you need to use a router that will help you manage your home network wisely.

For now, let’s leave the option of connecting a WI-FI router and a TV to the Internet via a LAN cable (twisted pair). Let’s look at a smarter way and figure out how to connect Wi-Fi to Samsung.

Router. Internet

Here, the reason for the lack of connection is the router operation. It is recommended to resume data transfer by:

  • reboot the device (you may need to perform a full reset);
  • elimination of interference in the signal transmission sector (it is proposed to reduce the distance between the TV and the router);
  • contacting the provider for information about the period of repair measures on the mowing line;
  • disconnect the external Wi-Fi device (when using it). It is recommended to remove the module from the USB port and reinstall it after a few seconds.

Please note that in the absence of a file with network characteristics (after activating Hard-reset), you will need to call a specialist of the company providing Internet services.

TURBION.NET 2021