How to connect two computers with one cable

How to connect two computers using a USB cable

Contributor(s): Nicole Levine, MFA. Nicole Levine is a writer and editor who writes about technology for wikiHow. Has over 20 years of experience in writing technical documentation and managing technical support teams at large web hosting and software development companies. She holds a master’s degree in creative writing from Portland State University and teaches composition, creative writing, and fanzine writing at various academic institutions.

Number of views of this article: 35 369.

Two computers with USB ports can be connected to each other using a special USB cable called a USB cable to connect (link, connect) the two computers. You can also connect two Mac computers via USB ports, but you will need a USB-Ethernet adapter and an Ethernet cable. If you connect the computers to each other, you can quickly transfer files from one computer to another.

Get a special USB-USB cable. [1] X Source It is important to use the correct USB-USB cable, because there are several types of cables. Two computers need to be connected to each other with a special USB-USB cable, in the middle of which there is a controller (chip) and USB plugs on both ends.

  • If the cable is shipped without software, open the cable manufacturer’s website and go to “Software” or “Drivers. Download and install the software on both computers.
  • If you can select a mode from the software, choose “link,” “bridge,” or “transfer.

Connect the USB cable to the USB ports on both computers. Do not pull on the cable. it is better to have the computers close together.

Run an installed program on both computers. You can find it by opening the “Start” menu, select “All Programs” or “All Applications”, and then click on the installed program. Now you can transfer files by sitting at only one computer.

View files you have on one computer from another computer. Note that the installed software looks like a file manager with two windows (one window for each computer). The “Local” window shows you the files that are on the computer you are sitting in, and the “Remote” window shows you the files on another computer.

Copy the files. In order to copy the files from the remote computer to the local one (the one you are sitting at) drag the necessary files from the “Remote” window to the folder in the “Local” window. Similarly, files from the local computer can be dragged to the remote computer.

  • USB-Ethernet adapter: it is a universal adapter, i.e. it is suitable for all computers. It has a USB plug on one side and an RJ-45 connector for the Ethernet cable on the other.
  • 10/100BASE-T Ethernet cable: this is a standard Ethernet cable that has RJ-45 plugs on both ends. This cable is sold in all electronics stores.
  • On the Internet, look for easier ways to transfer files between two Macs.
See also  How many Apple IDs can you create

Plug the adapter into a USB port on the first computer. If only one computer has an Ethernet port, connect the adapter to the other computer. Otherwise, connect the adapter to any computer.

Plug one end of the Ethernet cable into the RJ-45 connector on the second computer. This connector is on the side or back of the computer.

Materials and Tools

A crossed patch cord (a cable with the yellow and green pairs reversed on the end connectors) and two computers.

Assume that you already have two computers with network adapters on “board.

  • Connect both computers using a crossed patch cord. Insert one end of the patch cord into the network port of the first computer and connect the other end to a port on the second computer.
  • Make sure that the lights on the network ports on each computer are lit (assuming that you have both computers assembled and connected to the power supply).
  • Congratulations, you have completed the first part. You have physically joined the computers. Now you only need to configure each of them programmatically and the job is done.
  • Go to network card configuration by the following path: Start. Settings. Control Panel. Network Connections. Local Area Connection.
  • Right-click on the “Local Area Connection” icon and select “Properties” in the menu that appears.
  • In the window that appears, select the “Internet Protocol TCP\IP” component and click on the “Properties” button.
  • On the “General” tab check the “Use the following IP address” box. You will immediately have the IP address, subnet mask, and.
  • Enter the following address into the “IP addresses” field. 192.168.0.101
  • Enter the following address into the “subnet mask” field. 255.255.255.0
  • Press the “OK” button.
  • Once again, click on the “Ok” button.
  • To set up a workgroup, go to: Start. Settings. Control Panel. System.
  • In the window that appears, select the “Computer Name” tab.
  • Click on the “Change” button.
  • Fill in the field “Computer name” in the window that appears, e.g. “comp1”.
  • Check the “is a member of a workgroup” box.
  • Enter the workgroup name “workgroup”.
  • Click on the “OK” button.
  • Click the “OK” button again. The system will ask you to reboot the computer for the changes to take effect. Perform reboot.
  • Do the same for the second computer, but use “comp2” for the computer name. The IP address in this case will look like this: 192.168.0.102, the subnet mask remains unchanged (255.255.255.0), as well as the workgroup name (“workgroup”).
  • Restart the second computer.
See also  How to connect an external hard drive to a computer

Now congratulations for successfully configuring and connecting the two computers to a small network with a patch cord. Make shared directories on both computers and use them with pleasure!

Setting up computers to connect in parallel

Connecting multiple computers to a router with a cable connection is usually used when two desktop computers are connected to the Internet at the same time. It is not rational to connect a laptop or tablet computer via cable, as these devices are mobile in use.

Computers and the router are connected using standard Ethernet cables with RJ45 connectors. In the photo the gray cable connects the Internet network from the ISP to the router, and the yellow cables are connected to the LAN sockets and similar sockets that are on the back of the desktop computers.

Router settings are model-specific, so follow the instructions that come with the device. In order to organize two computers in the network, you need to do some settings.

If your router is set up as described in the manual, you usually have no problem connecting two computers over cable, and the connection is established automatically.

If the connection did not happen, then you need to perform the sequence of actions:

  • Go to the “Network and Sharing Center” through the context menu of the Internet icon.
  • On the tab that opens, you must select the item “High-speed connection” and activate it.

Usually these actions are enough to organize the connection of two computers to the router.

How to connect two computers with a LAN cable?

Looking for a way to exchange files between two computers using a LAN cable (LAN cable)? Well, congratulations, your search finally ends at this site. I am sure that this little instruction will help thousands of people who want to transfer files from PC to PC using an Ethernet cable. I am sure this article will be useful for you. So, let’s get started.

Before you start, you should know that sharing or transferring files from computer to computer by connecting them using an Ethernet cable is one of the oldest ways. Wi-Fi technology has evolved a lot over the years, and as long as your two systems are on the same LAN, you can simply enable sharing on one PC and use the other PC to access those files.

When you need to use a LAN cable to send files from one computer to another?

Oh that tedious thing when you have thousands of thumb drives to connect when you want to save some data, and it takes a long time too. If you’re tired of that, this is a great way to connect your computers! This method is also useful when, for example, the computers are not connected to a common Wi-Fi router or one has no permanent connection to such a network.

See also  How to make a network between two computers

Connecting two computers with a network cable

That’s the easy part. You need to plug each end of your network cable into the network card slots of both computers. Immediately after the cable is connected to the two computers, LED should be lit inside the jacks, indicating that the network card began communicating.

If there is no light after connecting the cable, it means that the network cards do not see each other. Chances are you either have one of your network cards turned off or a faulty network cable. This problem must be corrected before proceeding to the next step.

Local Area Networking

A local area network is a group of interconnected devices: PCs, televisions, printers, usually located no further than one room. The devices share memory, servers, thus complement each other.

Such a connection allows you to create a game zone for multiple PCs, easily and quickly transfer any data, print documents, if a common printer is installed, and do many other things. Connecting of devices today often takes place with the help of a router, but other connections can also be used, which you can read about.

Sharing the Internet for a Local Area Network

Also a very common task faced by users. As a rule only one computer in the apartment is connected to the Internet and the rest get access from it (unless a router is installed of course :)).

1) First, go to the tab “network connections” (how to open it is described in the first part of this article. You can also open it by logging into the Control Panel and then entering “View Network Connections” in the search box).

2) Next, you need to go to the properties of the connection through which you access the Internet (in my case it is “wireless connection”).

connect, computers, cable

3) Then in the properties you need to open the “Access” tab and check the box “Allow other network users to use the Internet connection” (as in Fig. 16).

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE