How to connect the Internet on the Samsung Galaxy phone

How to connect the Internet on the Samsung Galaxy phone

At the moment, the 4th generation mobile networks are the fastest data transfer option, and the coverage of these very networks applies more and more to those regions where it was not before. How to connect 4G to Samsung and use high.Speed Internet from your mobile device?

First of all, you need to make sure that all the conditions necessary for work in 4G are fulfilled (he is LTE).

Ways to connect to the Internet on the Samsung phone

There are currently three network modes: 2G, 3G, 4G. The slowest speed and low consumption in 2G, 3G has average indicators, and 4G, as everyone knows, is the speed mode. On each mobile device, the ability to connect to one of the modes depends on the characteristics of the phone. That is, if your phone supports 2G, you will not be able to connect to two other types of network. Mobile device with 4G support connect to two others. You can choose the network mode in the following way: go to “Settings”, select the “Mobile Networks” section, in the window that opens, select the mode you need.

There are two main ways to connect to a network on smartphones. This is a mobile connection and a Wi-Fi network. The first option is available anywhere in the world where there is a network covering, but is more expensive, and, sometimes, is inferior in the speed of connection. The Wi-Fi network is a more local option, although in modern cities almost all public places are equipped with its Wi-Fi network. Also, this option is faster and reliable.

To connect the Internet using cellular communication, you need to contact a mobile operator. If you have a SIM card on your phone, and your operator provides Internet connection services, then you need to connect these services to get the access points settings. As a rule, when buying a SIM card, these settings come automatically. But, if this does not happen, contact the Call Center and make a request. Open the received service message, select the “Appendix: Internet” section and click “Install”.

To connect the phone to the Wi-Fi network, you need to perform another set of actions. You need to go to the settings of your phone, and enable the Wi-Fi device. When the adapter is activated, you will see a list of available networks. Next, you need to select the right connection. Networks can be protected by password. If the network to which you carry out the connection just such, then the next action will be precisely password waters. After that, the smartphone will be connected to the network and you can use the Internet.

connect, internet, samsung, galaxy, phone

It is worth noting that with active connections to both the cell Internet and to the Wi-Fi network, by default, the smartphone will use it wi-fi connection

Step-by-step instruction

When setting up mobile data on Samsung, it is necessary to take into account a specific model, since each option has its own nuances of connecting mobile data.

Internet settings for Samsung Galaxy S2 which running Ice Cream Sandwich OS (English)

To set up the Internet manually, you need to contact the communications operator and ask for all the necessary data. Then the settings algorithm is simple:

  • Open the device menu.
  • Find a gear icon (settings), open.
  • Find the tab in the settings with the inscription “connection” (such a tab may not be, then we are looking for the next item).
  • We open “Mobile networks”.
  • The next point “Access point”.
  • Click “Add access point” or “options”.
  • Enter all the data that the operator gave.
See also  How to connect Bluetooth headphones Xiaomi to the phone

Then you should go to the menu item with the name “mobile data” and enable them. After that, it is worth rebooting the device.

  • On the main screen of the smartphone, it is necessary to draw a finger from the upper edge of the display down.
  • Pull the open window down to the very end of the screen.
  • Click on the icon displaying mobile data.
  • It should light up in blue.

If the mobile data does not turn on, you should check the settings via the “Connection” tab enter all the access points that the telecom operator will give and reboot the phone.

To connect mobile Internet to Samsung Gelexi A51, the following actions must be performed:

  • Go into the smartphone settings.
  • Select the “Connection” tab.
  • Then go to the SIM cards dispatcher.
  • Select a priority SIM card to connect mobile data.
  • Then return to the main menu and enable mobile data.

For smartphones with two SIM cards, you should definitely configure the Internet for the operator with whose SImces will be accessed to the Internet. If you use the mobile data of both operators, then you should configure two access points.

Other models

When setting up the Internet in other Samsung Galaxy models, the algorithm remains the same. Optimally, if you can do automatic setting, when the operator sends all the data at once on the phone and you will only need to install them. Manual control takes place in the settings in the tab mobile networks. It is necessary to enter all the same data that the operator of the communication gives if they have not entered them automatically.

How to enable mobile data on Samsung Galaxy

On the main screen of your smartphone, draw a finger from the upper edge of the display down.

Your window will open. Pull the window down to the very bottom of the screen.

Here you will display the function mobile data. Click on it.

The badge should become blue. So you turned on the mobile Internet and the transfer of mobile data.

On the main or additional screen, find the settings button and click on it.

In the settings, click on the connection tab.

Next, on this page, click on the data use tab.

Everything is ready. Here you can enable data transfer. You can see how much mobile traffic you spent.

Samsung Galaxy smartphones and Internet

All Samsung Galaxy corporation smartphones have the opportunity to exit to the World Wide Web. There may be several options:

It should be noted that most methods of connecting to the Internet by networks of 3G/4G operators have a paid basis. But there are optimal options such as unlimited tariff or special offers, which are most often presented by megabytes included in a specific service. In the latter case, it is necessary to check the correctness of the Internet.

You can learn more about the tariffs of MTS or your communication operator.

Thanks to the special data transmission settings that are provided by the communication operator you have chosen, you can make sure that there are no problems with Internet access. This is taken by a few steps:

  • Find the “Settings” menu in your smartphone and open it;
  • Open “other networks”;
  • Go to Mobile Networks;
  • Open “access points”. At this stage, you can find out what Internet profiles are available on your mobile device or make sure of their absence.

If the Internet is available, you will have to ensure the inclusion of data transfer in the so.Called “curtain”. If there is no access profile, then it will need to be adjusted independent efforts or contact the network operator by a free phone service number. It is not difficult to configure special difficulties with your own hand, just fill out the “profile name” field, as well as all the columns in the “access point”.

See also  How to install whatsapp on your phone

Mobile Internet

Currently, almost always the smartphone on Android is connected to mobile access points of cellular operators automatically-without the need for the owner to configure anything manually. And yet it happens that the Internet does not work on the phone; To make sure that the matter is not incorrectly “picked up” data, the subscriber should adhere to the algorithms below.

To manually connect and configure mobile Internet from MTS, you will need:

  • If required-switch in a new window to your SIM card.
  • Press the “Add” button.
  • In the fields “Name”, “Access point/APN”, “User Name” and “Password” to enter a single value. MTS.
  • Going down a little down the page, for the MCC and MNC parameters, indicate 257 and 02, respectively.
  • As a way to verify authenticity (on some models. A method of authorization). PAP or PAP/Chap.
  • In the line “Type of access point/APN” manually enter the value of Default.
  • Taping three points in the upper right segment of the window, call the drop.Down menu and select the “Save” option in it.

Important: changes will enter into force automatically; Now the user to connect on the phone to the mobile network, just select the newly created access point and wait until the connection is installed.

You can delete any point in its settings by choosing an appropriate option in an already familiar context menu.

Tele 2

In all details, find out how to connect the Internet on the body 2, the owner of the smartphone can in the World Wide Web. For the simplest setting up a mobile network, enough:

  • Repeat the actions 1-4 from the previous paragraph. In the fields “Name” and “Access Point/APN” to imprint, respectively, Tele2 Internet and Tele2.Ru.
  • Refuse in the drop.Down list of authentication.
  • And as a type of access point, enter the Default, SUPL parameter without spaces.

That’s all. Now, as in the previous case, you need to choose the newly created access as a point of access and start using all the charms of mobile Internet from the body 2.

Beeline

To connect a smartphone running Android OS to a Beeline signal, you will need:

  • In the fields “Name”, “Access Point” and “User Name”, respectively, BEELINEITERNET, Beeline.Ru and Beeline (in some cases, it may be necessary to enter a password. It coincides with the user’s name).
  • To verify authenticity (authorization), apply parameter PAP.
  • By introducing in the final line “Type of access point” the value of Default and retaining changes, the phone owner will finally connect his device to the Beeline wireless network.

Megaphone

The process of setting up mobile Internet from a megaphone on a smartphone running android is as follows:

  • The user creates a new access point in the lines “Name” and “Access Point” introduces Megafon and Internet parameters, and “user name” and “password”. A single value of GDATA.
  • For MCC and MNC, it indicates 255 and 02, and as the type of access point, it enters Default.
  • Ready! Now, to enable mobile Internet, it is enough to expand the notification curtain and slip through the easily recognizable icon.
  • After a few seconds, the user will see a SIM card near the icon, on which a wireless network is connected, a letter designation of the signal quality; If nothing appears, it is necessary to restart the phone and repeat the manipulations described above for your operator.

Choosing SIM cards

First of all, you need to choose a SIM card that will distribute the Internet (of course, this applies only to those smartphones in which two SIM card are installed). To do this, open the smartphone settings and in the “Connections” section click on the “SIM cards dispatcher”.

See also  How to reset Samsung phone settings to factory

We are looking for “mobile data” and select the card that is necessary to work on the network there.

If one SIM card is installed in the smartphone, it will be installed by defending as the main.

Balance check on the map

No less banal cause of the non-working Internet may be the absence of funds on the balance of SIM cards.

You can check the balance of available megabytes and, on the whole, the balance in the account can be used using special USSD checks that each of the operators may differ (for example, the operator of Megafon- the balance can be checked by introducing in the “Phone” code 558#, MTS 111217#. Vodafone-Ukraine-1014#, Lifecell-Ukraine-121# and T.D.).

In the absence of available megabytes, it is necessary to re.Order the service or replenish your mobile account.

There were questions? Write a comment! Good luck!

If there is no Wi-Fi router at home, then you can’t configure on the phone?

What to set up? Without wi-fi, you cannot connect the Internet to the phone. If only mobile Internet.

Samsung || Advanced Wifi Setting F41

Good afternoon.I have a Samsung S3 to this day, the phone was automatically connected to Wi Fai But after rebooting the modem, the phone does not connect in the network list writes that my network is not in the range of how and what to do I don’t know

Good, computer or laptop also do not connect?

We only have nothing more to have a computer

And what to do if when clicking on the network does not pop up a window with a proposal to enter a password?

Nothing happens at all when you press any network? Wi-Fi included? Try to restart the smartphone.

Please help me connect to wi-fi.I do everything according to your links, it turns out that it is connected without Internet access

Your router is configured, turned on? Data for connecting exactly those enter? When the router is connected, according to the instructions, you need to go to the manufacturer’s website, to your personal account. There are given data for connecting wi-fi. You connect at home or somewhere else?

Hello, please tell me what to do? Tower in 100 m. 4G signal but during the day the Internet is good and in the evening when everyone comes home from work and connect it, it disappears to zero. I wanted to take a router, but in the MTS salon they said that it would not help. And what is your opinion?

Hello. Mobile Internet or from cable?

Good afternoon, the question is, at home, Wi-Fi Internet, my daughter did not use her phone for some time. Yesterday they tried to connect the Internet, it didn’t work Samsung Galaxy J mini phone. We turn on Wi-Fi on the phone, it shows a lot of networks available, except for our. I introduce manually. The name of the network and the password, nothing happens And in the afternoon, my daughter called me to work and said that the laptop also does not connect to the Internet. But I haven’t watched the computer yet. And my iPhone sees everything without problems when I get home, it automatically connects. Can’t tell me that it could be? And how can this be fixed?

Hello. First, try to restart the smartphone and router. This phone is old, most likely is the Wi-Fi settings. Settings. Connection. Mobile networks. Network mode, which is displayed there? Should be LTE/3G/2G (auto). If there is only 2G and 3G, set 3.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE