How to Connect Samsung Headphones to iPhone

Simple ways

There are two ways to pair any wireless headset with an iPhone:

  • Bluetooth settings,
  • Automatically.

The process of connecting Airpods does not take much time and comes down to simple instructions:

  • First, the user must turn on Bluetooth. To do this, you need to slide your finger across the screen from bottom to top (in the locked state),
  • Click on the pictogram of the same name,
  • Turn on the device,
  • Airpods will be automatically connected to the smartphone.

If the wireless headphones are not from Apple, then the device should be connected through the settings:

  • You need to get the “plugs” out of the case and, if necessary, turn on.
  • Wait for them to connect to each other.
  • Then on the phone go to “Settings” and select “Bluetooth”.
  • Turn on Bluetooth.
  • Start searching for other devices.
  • Find the name of the gadget in the list of available devices, and start the connection.

After the headset is connected, the user can exit the settings and play music. If the device has been correctly connected, the corresponding icon will be in the upper right corner of the screen. Some models transmit information about battery charging.

One Airpod is quieter than the other

There are several reasons:

  • One of the headphones is discharged. Need to put the headset in the charging case.
  • Check that the holes are clean and not stained, there is no debris on the screens. If there is dirt, then it is necessary to carefully clean the device with a brush.
  • Be sure to check volume settings on iPhone.

Connection problems after upgrade

Very rarely, there is a synchronization problem after installing a new version of iOs on the iPhone.

  • Restart bluetooth first and re-pair,
  • Ideally, restart your smartphone,
  • Remove all major sources of interference that might interrupt or affect the signal.

If the headphones are branded:

  • Open the case next to the phone. The display should prompt you for this.
  • Try connecting another wireless headset to your iPhone. If this does not help and there is still no connection, we recommend contacting technical support.

Only one earphone works

If the user encounters this problem, you need to try to fix it in different ways.

  • First option. Put the earplug in the case and wait at least 10-15 seconds. Reconnect to smartphone.
  • Second option. You need to turn off Bluetooth on the iPhone and start it again. If the action does not help, you can restart the headset.
  • Third option. It happens that one of the headphones does not see the phone. You must select “Forget device” in the settings, and then connect both as a new pair.
  • The fourth way. In the main menu of the iPhone, in the equalizer, set the slider to the center position. It happens that the indicator shifts to the extreme left or right position.

Pairing occurs, but no sound or poor sound

In this case, we are talking about a poor-quality headset or a sudden interruption of the signal.

If the problem is a bad signal, follow the instructions:

  • Restart headphones.
  • Disconnect the headset for about 30 seconds and only then reconnect.
  • Shorten the distance between the smartphone and the wireless headset. Long distance may interfere with the connection.
  • Disable extraneous Bluetooth devices.

3 ways to connect any wireless earbuds to iPhone

How to Connect Samsung Headphones to iPhone

Airpods, and lesser-known plugs, are only gaining in popularity with the development of streaming and music services. But sometimes, users are faced with the problem of how to properly synchronize devices. Therefore, let’s figure out the details of how to connect wireless headphones to an iPhone. Let’s consider the main problems in parallel.

The manual is universal and suitable for all iPhone models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max.

Headset runs out of battery quickly

The Li-ion battery has a limited shelf life, usually 300-400 charge-discharge cycles or 3-4 years of active use. Over time, the battery life of AirPods diminishes dramatically. For old technology, there is only one way out, contacting the service to replace the built-in battery.

If the user has AirPods, then you can try to increase the battery life. Those. enable the auto-detect ear function. With the help of an infrared sensor, the headphones will understand when the user takes them out of their ears, they will automatically turn off. This will help conserve battery power. To activate the function, you need:

  • Open “Settings”.
  • Select “Bluetooth”.
  • Then “AirPods”.
  • Turn on the toggle switch “Auto-detect ear”.

If the headset is not native, then it can be returned under warranty or taken to a service center to replace the battery.

Before connecting accessories, with the section “Questions and Answers”.

NFC is a wireless technology that helps to exchange data between different devices.

The algorithm for connecting headphones with an NFC chip to an iPhone is quite simple and includes several steps. This feature is present on all iPhone models older than 5.

  • If the option is not activated, you need to go to the settings and, opposite NFC, move the slider to the right.
  • Then you need to touch the back of the phone to the NFC icon on the wireless headset.
  • Allow the connection. There will be a connection between the devices.

This function works on gadgets with iOs above 13.1. As for the headset, not only AirPods are supported, but also some models.

The first option for simultaneous connection using the “Share audio” option.

Instructions on how to output sound to the second set in a case:

  • Connect one AirPods to iPhone. The second should be in the case.
  • When listening to music on AirPods, you need to bring the phone to an open case with a different set.
  • A menu will open where you need to select “Temporarily share audio”. Confirm action.

Connecting second headphones without case:

  • Connect one “plug” to the iPhone and put them on.
  • Open AirPlay from the lock screen and share audio.
  • Bring your phone to another device and click “Share Audio”.
  • Confirm connection on the second gadget.

The second way to bind with manual configuration.

  • Connect one headset to iOs.
  • Launch settings and then go to Bluetooth.
  • Open the case with the second set and hold the connect button until the indicator starts flashing.
  • Wait until the headset appears in the “Other devices” section.

Bluetooth has a maximum transmission range of about twenty meters. But do not exclude the influence of interference from other objects, which can reduce the range of Bluetooth operation.

If the headphones are working properly but there is a problem with the volume control. In AirPods, all default settings, including changing the volume, were transferred to the voice assistant Siri. To control the sound level, just tell Siri to turn down or turn up the volume.

You can just say, “Siri, volume at maximum.” You can also adjust the sound as a percentage. You need to name a specific number and the command will be executed. It is important to remember that the system will pause the music before turning up the volume.

Cheap Chinese fakes refuse to work

The phone can see the headset, but recognize them as two different devices. Sound quality issues very often occur, or the iPhone doesn’t pair with the Chinese counterfeit at all.

  • First, you need to connect the headphones to each other (each model has its own instructions. read the manual), and only after that to the smartphone.
  • Reboot both devices.
  • Reset Bluetooth settings.

Possible difficulties

Even though the wireless device is convenient to use, connection problems may occur. It is important to note that there are almost no difficulties with the original AirPods headset, but it will be useful to know the solution to standard problems.

Disconnecting wireless headphones from iPhone

There are two ways to disconnect wireless headphones from the iPhone:

Perform all actions in reverse order:

  • turn off sync;
  • turn off Bluetooth;
  • turn off the power on the headset.

Use the line in the headphone window “Forget this device”, clicking on which deletes the connection data, and then turn off the gadget itself.

Why am I having connection problems

Wireless headphones not manufactured by Apple, but by third-party manufacturers. Samsung, Huawei, Xiaomi? and little-known Chinese brands. are deprived of the usual magic of AirPods, when a couple of taps are enough for pairing. Therefore, before connecting audio equipment to the iPhone, you will have to double check every little thing:

  • Distance problems. Bluetooth 0 operates at a distance of up to 10 meters, previous versions of the wireless connection cover a distance of 8-9. But, as practice suggests, sometimes even 50 centimeters at the first pairing is too much: it is better to keep the headphones as close to the iPhone, iPad or iPod Touch as possible.
  • Experiments with the network. Old Bluetooth and Wi-Fi incompatibility issues are still rare today. Temporary disconnection from unnecessary network sources will help to get rid of the error. It will also help the transition to airplane mode with the subsequent forced activation of Bluetooth.
  • Restart iPhone. A banal but sure way to get rid of rare problems and temporary difficulties. The reboot method depends on the version of iPhone (5, 6, 7, 8, or X): on models with Face ID, hold the side button and volume down or up keys, on phones with Touch ID. the button located at the top or side of the case.
  • Refusal to pair. If the question. how to connect wireless headphones to an iPhone has long been resolved, but it is still impossible to enjoy music due to problems with playback, often desynchronization and loss of signal, then the Bluetooth section in the “Settings” section will help to sort out the problem.
  • From there the wireless technology is “forgotten”, and then it is connected again, but from scratch and without previous errors and found problems.
  • Factory reset. A radical method, which should be resorted to only if the other actions did not help, the headphones are 100% serviceable and function on third-party technology from Apple.

The “Basic” section, the “Reset” menu item will help to bring the settings to their initial form. Already from there, the network settings are either reset, or “all settings” at once. Depending on the specific situation and the problems observed. For example, when connecting, pairing or listening to music.

Step-by-step pairing instructions

Before connecting wireless headphones to your iPhone via Bluetooth, you need to make sure they are compatible. Things are simpler with the headset from the “apple” manufacturer, because they are mated in 100% of cases. In addition, they are compatible with most other non-Apple mobile devices. They all connect in about the same way. To do this, follow the instructions below:

  • Turn on your headset and activate the option to let other devices see them. Usually, all this is done by pressing only one button, although it may be a key combination (depending on the headphone model).
  • In iPhone, open the main settings menu and go to the “Bluetooth” section.
  • Enable the desired function and wait until the list of detected devices appears, where the headset should appear. You need to tap on it. If everything is done correctly, the status “Connected” will appear. (do not forget to click on the “allow new devices to connect” button, if available).
  • You will also see the corresponding icon in the status bar next to the battery level.
  • To connect Bluetooth headphones to your iPhone, the headset may require a passcode. But this should be stated in her operating instructions. Therefore, it is also worth familiarizing yourself with it. It remains only to check them for performance.

How to connect headphones to an iPhone via the Lightning adapter

  • Best “Lightning” headphones for iPhone and iPad: Philips Fidelio M2L and Audeze SINE

All new iPhone models do not have a standard 3.5mm audio jack, they only have a universal digital Lightning connector. This connector has its pluses and minuses regarding the connection of headphones to it.

The advantage of the Lightning connector: this is a digital connector, i.e. the phone sends a digital unconverted signal to the headphones, the headphones, using the built-in DAC, independently convert the digital signal to analog, this allows you to achieve stable sound quality. In this case, the sound quality of the headphones is constant and does not depend on which iPhone you connect them to, the headphones perform all sound processing on their own.

Disadvantage of the Lightning connector: we are considering Lightning from the point of view of connecting headphones to it, and in this case, a huge disadvantage is the very limited range of headphones that can be connected to this connector.

But it is possible to connect ordinary headphones even to an iPhone that does not have an audio input. use the Lightning adapter. It’s not very convenient, but there is no other way out.

I have selected a couple of inexpensive adapters for you, I think you will like them.

Connection problems after upgrade

Sometimes iPhone stops detecting headphones after firmware update.

There are 2 solutions:

Revert to the previous firmware version on their own. For this:

  • make a full backup of data in iCloud and iTunes;
  • in the iCloud settings, turn off the iPhone to remove protection from the software available on this device;
  • download an old version of iOS on a PC;
  • connect iPhone to computer using a cable;
  • in iTunes, after opening the device control page, hold down Shift;
  • by clicking on the corresponding button, the control window is updated;
  • in the explorer that opens, select the downloaded file with the previous operating system;
  • after complete installation, activate the phone.

Install a new version of the firmware in the service center, followed by checking the Bluetooth headphones for compatibility.

How to connect headphones?

In different models of wireless headphones, the Bluetooth function is turned on in its own way, so before connecting with an iPhone, you should carefully study the instructions for the headset.

The first time, for better synchronization, the headset is turned on next to the device. Connecting headphones to the phone is as follows:

  • on the iPhone, a line with the name of the connected wireless headphones should appear in the Bluetooth window;
  • when you click on this line, a new window will open in which, opposite the “Synchronize” option, the floating button must also be moved to the on position (green color).

Lightning adapter Choetech HUB-A01

This is an elegant, simple and easy-to-use Lightning adapter for connecting traditional wired headphones to new versions of iPhones. Please note that you can simultaneously connect headphones and charge your iPhone, which cannot be done if you use a native adapter.

How to connect Bluetooth headphones to iPad or Android

The principle of pairing devices is the same as in the previous manual. After activating the headset, turn on the wireless technology on the mobile device, find the headset and pair them.

Before connecting Apple Wireless Headphones to your phone, you should know that the Bluetooth connection is actively consuming the battery of both devices. Try to disable them for the time when they are not needed.

So, we figured out how to connect Bluetooth headphones to an iPhone.

How to connect wireless headphones to an iPhone

You can easily connect wireless headphones to an iPhone, regardless of their manufacturer, it is not necessary that they be branded from Apple.

It’s easy to do this using Bluetooth wireless technology and easy configuration of its connection in the settings of your phone.

In the last article, you learned how to take a screenshot on an iPhone. Today we are going to talk about how to connect wireless headphones and speaker to iPhone via Bluetooth easily and quickly.

Interesting! Also, in a separate material there is detailed instructions on how to connect AirPods to iPhone easily and correctly.

How to connect wireless headphones to iPhone

Charge your wireless bluetooth headphones and press the bluetooth enable button.

Open the smartphone settings, go to the section with the name “Bluetooth”, set the switch of the item of the same name to the active position and wait until the headset is found and displayed in the list below.

When the device is found, click on it to establish a connection. In rare cases, a PIN may be required, it is usually located on the headset itself or its box.

Immediately after connection, the sound will work from the headphones and, if there is a built-in microphone on the device, then conversations can be conducted through it, which is very convenient.

Interesting! If you have problems with playback or with pairing in general. in the same section, do “Forget device” by clicking on it and then adding it again. This often solves the problem.

How to connect a wireless speaker to iPhone

Be sure to charge the Bluetooth speaker before connecting / pairing and press the button on it.

Go to the phone settings and open the “Bluetooth” section, make the item of the same name active to start searching for devices.

Immediately after the column appears, select it from the list, if asked to enter a password, you can find it on the column itself or on the box from it. often it is just. 0000.

If you encounter problems and do not play music. delete the added column in the same menu by clicking on “Forget device” and then adding again.

Interesting! You can check music playback and sound quality immediately. So you can easily decide before purchasing whether you like the sound quality or not.

Possible connection problems

  • If the connection is not established, then check if the device is paired with another phone or device. If yes, then disconnect and try again.
  • Make sure the Bluetooth button is turned on on the Bluetooth device.
  • Check the battery level again.
  • Delete the device and add it again in the Bluetooth settings. found gadgets.
  • If the headphones or speaker are not visible at all. Then most likely the device is simply not supported by the iPhone and nothing can be done.
  • It will not be superfluous to check if the headset works with other phones.

Important! There is no point in restarting your iPhone, you just delete all the data, and this will not solve the problem. If the gadget is not visible at all, and other smartphones recognize everything perfectly, then there is simply no support, you need to look at another option.

Thus, you can connect any wireless headsets to the iPhone. These can be overhead or plug-in options from Xiaomi, Samsung, Honor or others.

Are Samsung earbuds compatible with iPhone?

As for the wired headphones from Samsung, they certainly will not fit Apple products. Firstly, everyone knows that Apple deliberately uses everything of its own, original (software, methods of connection, charging and signal transmission). Android devices and IOS phones cannot be connected via Bluetooth, while Wi-Fi is quite difficult. It is thanks to this fact that the apple has developed its own third option for connecting headphones, which does not coincide with Samsung or Nokia.

precisely, there may be sound, but the microphone function, track switching buttons and others will not be able to work. The problem is different contacts for devices from different companies.

Samsung’s new Gear IconX headphones show good compatibility with iPhone and other Apple products.

A wireless headset differs significantly from a wired type. Therefore, via Bluetooth, it is possible to establish the compatibility of the headphones with the iphone. You need to enable the connection through the phone settings, after some actions, the wireless connection of the Samsung headset to the iPhone will be configured.

How to Connect Samsung Earphones to IPhone?

Many people have a question: how to connect Samsung headphones to iPhone phones? These 2 organizations have long been competing in the market of all kinds of electronics, and although Apple products are more expensive and are in great demand among representative buyers, Samsung is also far from lagging behind, and the latest innovations: Gear IconX headphones and Samsung Galaxy S 9 bring the famous South Korean company to the favorites of the permanent rivalries.

So, does this fact affect the compatibility of similar products, but from different manufacturers. Will Samsung’s Wireless, Wired Headphones work with the iPhone? Let’s figure it out in this article.

How to connect them to an iPhone?

The principle of connecting a wireless headset is very simple and consists of several common steps:

  • We turn on the iPhone device. Go to system settings.
  • Find the “Bluetooth” section, go on, turn on the Bluetooth signal.
  • We are waiting for a few seconds and the name of your headphones will appear on the display. Do not be alarmed if there are some incomprehensible letters and numbers, electronics have their own naming and connection algorithms. At least there shouldn’t be a mistake, because you should only have one Bluetooth headset from Samsung nearby.
  • The last step: click on the name of the headphones and after a few seconds the sound will go to the headphones.

Unfortunately, there are coins when the iPhone cannot find a connected device nearby. In this case, there are no exact recommendations, but you should check how close your headphones are to the phone, then turn off and then turn on Bluetooth on the device. If this does not help either, restart the phone and try again.

How to connect wired headphones and headset to iPhone

If you have wired headphones with a standard 3.5mm jack, just plug it into the jack you see in the photo above. Insert all the way, but you do not need to press hard, the jack should go into the socket easily and at the end you will feel a slight click.

To simply listen to music, play or watch movies, you can connect any headphones with a 3.5mm audio jack to the iPhone audio jack. But you must remember that it makes no sense to connect headphones with an impedance higher than 32 Ohm to the phone, because the power of the phone is not enough for the headphones to “play” well. If the resistance is higher than 32 ohms and you connect them to the phone, the sound will be boomy, loose, flat, and in some cases there may be no sound at all.

If you want to connect a wired headset to your iPhone, you need to make sure it has the correct audio jack configuration. If you have a “native headset, then just connect it to your phone and it will work.

If you bought a new headset or are about to do so, make sure that the box clearly states that this headset is fully compatible with Apple technology. Usually the inscription looks like this: “Made for iPod, iPhone, iPad”. This is necessary in order to be sure that the microphone and remote control, if present on the headset, will work correctly, otherwise your microphone may not work and the remote control.

This is because Apple used their own type of pin layout on the audio jack, as you can see, the ground and microphone pins are swapped with each other, so if you buy a headset that is designed for Android phones, you will have sound. but the microphone will not be able to record the voice. The opposite is also true, if you connect a headset made specifically for Apple to your Android phone, the sound will go on, but everything else will not work (microphone and remote).

How to connect headphones to an iPhone via the Lightning adapter

All new iPhone models do not have a standard 3.5mm audio jack, they only have a universal digital Lightning connector. This connector has its pluses and minuses regarding the connection of headphones to it.

The advantage of the Lightning connector: this is a digital connector, i.e. the phone sends a digital unconverted signal to the headphones, the headphones, using the built-in DAC, independently convert the digital signal to analog, this allows you to achieve stable sound quality. In this case, the sound quality of the headphones is constant and does not depend on which iPhone you connect them to, the headphones perform all sound processing on their own.

Disadvantage of the Lightning connector: we are considering Lightning from the point of view of connecting headphones to it, and in this case, a huge disadvantage is the very limited range of headphones that can be connected to this connector.

But it is possible to connect ordinary headphones even to an iPhone that does not have an audio input. use the Lightning adapter. It’s not very convenient, but there is no other way out.

I have selected a couple of inexpensive adapters for you, I think you will like them.

How to connect wired and wireless headphones to iPhone

Headphones for iPhone

You bought a brand new, glossy, cool iPhone and now you want to listen to music, play games or watch movies with it, all this can be done using the built-in speakers, but very quickly you realize that you want to get high-quality sound. and for this you need to connect headphones. How to connect headphones to an iPhone. the answer is below.

Lightning adapter Auswaur

The difference between this adapter and the previous one is that you get 3 jacks at once: audio, Lightning and USB-C. And you can use them at the same time.

Lightning adapter Choetech HUB-A01

This is an elegant, simple and easy-to-use Lightning adapter for connecting traditional wired headphones to new versions of iPhones. Please note that you can simultaneously connect headphones and charge your iPhone, which cannot be done if you use a native adapter.

How to connect wireless headphones to an iPhone

Step 1 First of all, we need to get into the “Settings” of your phone or tablet. To do this, find an application on the desktop called “Settings” and click on it.

Step 2 Now in the left column you need to find the Bluetooth adapter menu, it is almost at the very top of the list. Go to it.

Step 3 In my case, Bluetooth is disabled. If you have it turned off too, turn it on by clicking on the switch on the right.

Step 4 After you turn on Bluetooth, you will see a list of devices with which your gadget is already familiar. Or you will not have devices in the list if you have never connected wireless headphones and other devices to your phone or tablet.

Step 5 Now take your headphones, make sure they are turned off, find the power button and hold it for up to 10 seconds. This will allow the headphones to enter pairing mode. Then go to the next step.

Step 6 A few seconds after you have activated pairing mode on your headphones, their name should appear in the list of detected devices. As soon as it appeared (in my case, the Momentum M2 IEBT headphones appeared). click on it to start automatic pairing mode.

Step 7 If a progress bar appears to the right of the device you clicked on, it means that the automatic pairing process has started. You need to wait a couple of seconds and the device will be ready to work.

Step 8 That’s it, pairing is successful. The status of your headphones should change to Connected, which means they are already working with your iPhone or iPad. Enjoy superior sound. Next time you do not need to go through the pairing procedure again, you can simply turn on Bluetooth on your phone, turn on the headphones and they will establish a stable connection automatically within a few seconds.

Now you know exactly how to connect headphones to any iPhone model.

How to connect Galaxy Buds to Android devices

Thankfully, the Galaxy Buds work with other Android devices as well, although the pairing process may differ depending on the model. For example, on Google Pixel smartphones, you will need to enter the notifications and shortcuts menu (by swiping down from the top of the screen). Here you will need to hold down the button on the Bluetooth button. You will see a list of devices in which you should select Galaxy Buds and pair them. It is also possible to pair from the general settings menu.

How to connect Galaxy Buds to iOS devices

If you want to disconnect Galaxy Buds from iOS devices, then open the menu “Settings”. “Bluetooth” and find the headphones in the list. Click on them to pair.

How to connect Galaxy Buds to Samsung smartphone

Pairing Galaxy Buds with a Samsung Galaxy device is a relatively quick and easy process. All you have to do is turn on Bluetooth on your smartphone and open the protective case. Your device will automatically detect them, and a pop-up message on the smartphone screen will let you plug in the headphones immediately.

If this suddenly did not happen, then go to the settings menu, find the “Bluetooth” item there and find the headphones in the list of devices, then create a pair.

How to pair Galaxy Buds with any of your gadgets

To date, almost all manufacturers of headphones for mobile phones have presented their versions of the “killer” AirPods. However, one of the most successful (or at least the most famous) is Galaxy Buds from the South Korean company Samsung. At the same time, these small “ears” can work perfectly not only with “native” devices from the Galaxy series, but with any other gadgets. And today we’ll show you how to pair Galaxy Buds with any of your devices.

In this article, we’ll take a look at the most popular device pairing options. It makes no sense to disassemble each specific model of smartphones running Android, however, the general principles of connecting to gadgets running OS from Google will still be affected. And one more important point: if you plan to use Galaxy Buds with multiple devices, remember to disconnect them from one gadget before trying to connect them to another.

Setting up headphones using the Samsung Wear app

Once the earbuds have been connected, your phone’s Samsung Wear app acts as a “control center”. Here you can check the battery life of the Galaxy Buds and use the Find My Earbuds feature. You can also control equalizer, notifications, touchpad and other options.

How to connect Galaxy Buds to Windows 10 devices

You can pair the Galaxy Buds with a Windows 10 PC. First, open the Start menu and search for “Bluetooth” in the search bar. After entering the settings of the wireless interface, proceed to the list of available devices, where you can already select Galaxy Buds.

How to connect Galaxy Buds to MacOS devices

Pairing the Galaxy Buds with Apple computers is also pretty easy. Open System Preferences and go to Bluetooth settings. When you see Galaxy Buds appear in the list of available gadgets, click the Connect button.

What kind of headphones do you use? Tell us about it in the comments and in our chat on Telegram.

Confidentiality is a very specific thing, and therefore not appreciated by everyone. Some put it above all else, others perceive it as something that does not need to be taken care of, and still others are totally against it. But if I, in general, have no questions about the first and second, then the third give everyone, and first of all themselves, a lot of problems by statements that they are not doing anything illegal and they have nothing to hide. And completely in vain.

Despite the fact that millions of Android users regularly get into skirmishes with iOS users and prove to them that Google’s operating system is the best thing that has happened to smartphones, this is not entirely true. Not that I would argue with the fans of the “green robot”. not at all. just for the most part they all talk about different Android. Someone praises the stock version of the operating system, which did not know third-party interference, someone means third-party shells and launchers, and someone means custom firmware based on Android. But which Android is better. clean or modified by shells. we will find out today.

A habit is given to us from above, it is a substitute for happiness. So, it seems, Ours said everything, and he was damn right. It’s a pity that Google refused to understand this and, in pursuit of trends, replaced the familiar logos of its services with more modern, but completely soulless ones. Perhaps the old icons were really old, but that was their beauty. After all, you cannot imagine a situation in which Aeroflot changes its logo to something more modern, can you? In the case of Google, it should have been that way. But it did not grow together. Well, we fix the mistakes of the search giant ourselves.