How to connect qcy headphones to the phone

How to Connect Wireless Headphones to Your Phone?

Not sure how to connect wireless headphones to your phone or maybe the problem occurred later when using? Dr.Head will help you to understand everything, because the process is not much more complicated than the connection of wired headphones!

There are several types of wireless connection, but for headphones (as well as portable speakers) today only Bluetooth connection is relevant, so we will talk about how to connect Bluetooth headphones / headset to your phone (smartphone or tablet).

You can read about what types of wireless connections exist, as well as other parameters of wireless headphones, in our article: “How to choose wireless headphones

Unpacking

You know, the QCY T13 wireless headphones have the signature packaging design we’ve seen on previous models.

On the front of the box we can see a picture of the headphones, as well as their main features. On the back side are the main features.

Inside the box I found a charging case with the headphones, a USB Type-C charging cable, silicone ear tips, and a user manual.

By the way, the user manual is in Chinese and English.

Mono mode

  • Turn off the headphones, then touch the touchpad on either earphone for 5 seconds to enter pairing mode (the LED will flash red and white)
  • On your cell phone, find the EarBud (QCY-T3_R / L) and tap to connect.
  • Pairing completed.

EnableTouch the touchpad to turn on the ls (LED will glow white if Is)While charging, open the case cover to turn on the earpiece (LED will glow white for 1 second).

Power OffTouch the Touch Bar for 3 seconds to turn off the power. (LED glows red for 2s. I put the earbuds in the case and close the lid.

Ignore CallTouch Bar allows you to ignore incoming calls.

Answer a callTwo-click the Touch Bar to answer an incoming call and double-click again to end it.

Play/pauseWhile playing, double-click the Touch Bar to pause and double-click again to resume playback.

Volume controlSwipe your finger up / down on the touchpad to increase / decrease the volume.

How to Wear

  • Rotate the earpiece and put it in your ear, then shake your head to check the wearing stability.
  • Hold the microphone to your mouth so you can talk more comfortably.

Three-way calling and switchingTouch the panel twice to answer an incoming call. If another call comes in synchronously, press twice more to hold the first call when the second call activates, or keep touching the panel for 2 seconds to ignore the second call. Hold the panel down for 2 seconds to toggle between active and held call.

Charging the docking station

The red light is on when the docking station is charging, and when it is fully charged, the blue light will light up instead.

On Hold down the MFB for about 3 seconds (white light on). If your device is charging in the docking station, it will activate when you take it out.

Turn off Hold down the MFB for about 3 seconds (the red light will turn on)

Reject call Hold down the MFB for 1 second to reject an incoming call

Redial the last outgoing call. Press the MFB twice in standby mode.

Groundhook Press MFB twice when you are on the phone

QCY Q29 Bluetooth headphones

Greetings all! Today. a short review of compact Bluetooth headphones with box charging.

A flurry of similar solutions was obviously expected after the appearance (and in some cases, by the very appearance) of the Airpods. So, QCY Q29 is a stereo Bluetooth headset, complete with a storage / recharging box.

Packaging As you can see in the photo (all photos are under the appropriate text). rather ascetic, made of gray cardboard, however, the creators had some tactics and it adhered to take care of high-quality stylistic solution. The packaging is sealed and has a sticker to verify authenticity (with a protective cover). Specified manufacturer is Dongguan Hele Electronics Co.

Inside the package: 1. Earphone Charging Box 2. Set of ear cushions of different diameters 3. Short charging cable 4. Manual 5. The insert describing the initial pairing process.

According to the latter: 1. It is necessary to remove the protective stickers from the contacts of headphones and put them back into the charger box 2. Take out the right earphone and connect it in the Bluetooth settings of the “parent” device 3. Take out the left earphone and wait for it to automatically connect to the right.

The charging case and headphones The charging case itself is very compact. The body is made of plastic with a soft touch coating. The cover. made of thin matte plastic, opens easily, but the hinge. does not inspire confidence in terms of durability. I’m afraid that if used carelessly, cracks will inevitably appear, t.The hinge is the hinge that goes all the way “to the break” when hinged. In the case on the hinge side. there is a standard Micro USB connector. In general the box is ergonomic and takes very little space. Remove the headphones. The bottom of the headphones are also made of plastic with soft touch coating and have “out of the box” ear cushions minimum size (they fit me immediately). The upper part is made of plastic with a glossy finish, and the panel-buttons with the inscription QCY.have a soft transparent silicone coating. In new headphones the charging contacts are sealed with a transparent film. Remove it. Important: remove it carefully, t.к. Sometimes there are invisible areas on the contacts (I had it that way) and as a consequence, the conclusion follows that the headphone does not work.

See also  What to do if the Xiaomi phone does not turn on

How to disassemble the headphone to replace the battery in the future. do not know yet, probably no way, only saw. It is also possible that there are answers under the button sticker, but not sure.

After returning the headphones to the box, connect the cable to any suitable voltage source. the red light comes on. On the headphones themselves. when inserted into the box. the indicator first lights up red, then it changes color to white. After the end of charging. the headphone indicator turns off. The installation of the headphones in the charger requires attention, t.к. the headphones in the socket may rotate slightly around their axis, which may result in incomplete contact with the charging pad. In this case the indicator of the headphones may not change color from red to white. The cover keeps the headphone from disconnecting from the pad when you shake it. However, I saw a customer complain on Amazon that when you shake the headphones in your. they may disconnect from the pads and consequently activate and connect them, which in turn will cause the person to miss the call. I tried to reproduce the problem. it did not work.

Stereo So, I didn’t wait for a full charge and tried plugging the headphones into the phone right away. When I took the right earphone out of the box and before I put it into the ear, I heard the earphone tell me in English in a female voice that “power on” (of course it will always be like this. don’t be afraid of missing something important while carrying the earphone in your ear). The earpiece automatically went into pairing mode, was detected by the phone and successfully connected. The pairing process can also be initiated by holding down the earphone button for as long as possible (a shorter press will simply turn it off). After plugging the first earphone, I took out the second one, put it in my ear and heard “connected”. After a while the headphones told me separately that “right channel” and “left channel” work ok. Alerts are recorded well enough and do not hurt your ears. In the future, after using the headphones. you just put them in the box, they automatically turn off and go into charging mode. To activate them, just take out the right one by one, wait until it connects to the phone, then the left one, and wait until it connects to the right one. Important: if you take out the left before the right connects. the left will miss the connection time to the right and have to repeat the procedure of taking out of the box of the left. Let me say at once. the process is not instantaneous, sometimes the right one connects for 15 seconds, and the left one “pulls up” to him for 20. Slowly, yes. Claimed to support Bluetooth profiles: HFP/HSP, A2DP, AVRCP.

The sound I first listened to music on YouTube, then on standard player, then on PCRadio What can I say In theory I have to describe here the pros and cons in audiophile slang, which can neither be confirmed, nor denied, t.к. Such evaluations are strictly subjective. So I will simply describe the impressions of an unspoiled Hi-End and not very competent in the sphere of quality sound consumer: 1. On tests, the stereo sound is excellent, no lag, echo, etc. 2. The sound is clear, without any “sinking” in the treble typical for cheap headphones. No background noise in the pauses. 3. The bass is present, or rather the part of it which is usually produced by the midbass. In tests the “clean” bass breaks through the expected “grunting”. 4. In the absence of hearing, I am guided by the indicator of obviously bad acoustics in the form of headaches during prolonged listening. So, with these headphones, I did not feel any pain or scarring in 4 hours of continuous listening.

See also  What to do if the computer does not see iPhone

Subjective feedback: I really liked the sound. Like this, no more, no less.

Control in this mode is simple: pressing the button on any earphone simply pauses/resumes the playback (the volume control on the earphones themselves has not been implemented). However, this control does not always work the same on all players. So. For example, the player in my Xiaomi Mi4c button stops and starts up again, but the sound level drops to just over zero when it resumes (although the sound slider in the phone remains in the same position). And only when the melody is played back again, the sound level in the phone is the same as the one that was set. Effective distance from headphones to phone. I had about 5 meters through two reinforced concrete walls. Not bad.

QCY Q29 Bluetooth headphones

Greetings all! Today. a small review of compact Bluetooth headphones with box charging.

A flurry of similar solutions was obviously expected after the appearance (and in some cases, by the appearance itself) of the Airpods. So, QCY Q29 is a stereo Bluetooth headset, complete with a storage / recharging box.

Packaging As you can see in the photo (all pictures are under the corresponding text). rather ascetic, made of gray cardboard, nevertheless the creators had some tactic and it took care of the quality stylistic solution. The packaging is sealed and has a sticker for authentication (with a protective coating). Manufacturer listed is Dongguan Hele Electronics Co.

Inside the package: 1. Boxed charging with earbuds 2. Set of ear cushions of different diameters 3. Short charging cable 4. Manual 5. An insert describing the initial pairing process.

According to the latter: 1. You need to remove the protective stickers from the contacts of the headphones and put them back in the charging box 2. Take out the right earphone and connect it in the Bluetooth settings of the “parent” device 3. Take out the left earphone and wait for it to automatically connect to the right one.

the box and the headphones the charger box is very compact. The housing is made of plastic with a soft touch coating. The lid is made of thin matte plastic, it opens easily, but the hinge doesn’t inspire confidence in its durability. I’m afraid that if used carelessly, cracks are inevitable, t.The hinge is the hinge when tilted up to the breaking point. In the case of the hinge. is located a standard Micro USB connector. In general, the box is ergonomic and takes up very little space. Removing the headphones. The bottom of the headphones are also made of plastic with soft-touch coating and have “out of the box” ear cushions minimum size (they fit me immediately). The upper part is made of plastic with a glossy finish, and the panel-buttons with the inscription QCY.have a soft transparent silicone cover. In new headphones the charging contacts are sealed with a transparent film. Remove it. Important: remove it carefully, t.к. Sometimes there are invisible spots on the pins (I had it so) and as a consequence, the following conclusions about the non-working headphone.

How to disassemble the headphone to replace the battery in the future. do not know yet, probably no way, only saw. It is also possible that there are answers under the button sticker, but I am not sure.

After returning the headphones in the box, connect the cable to any suitable voltage source. the red light turns on. On the headphones themselves. when you insert the headphones into the box. the light turns red, then changes color to white. After charging. the headphone indicator turns off. The headphones must be inserted into the charger with care, because the headphones may rotate slightly around their axis.к. headphones in the socket can rotate slightly around their axis, which can lead to incomplete contact with the charging pad. in this case the headphone LED may not change from red to white. The cover tightly kept the earpiece from disconnecting from the pad when shaken. However, I saw a customer complain on Amazon that shaking the headphones in his could disconnect them from the pads and activate and connect them accordingly, which in turn would cause the person to miss the call. I tried to reproduce the problem. it did not work.

Stereo So, I didn’t wait for a full charge and tried plugging the headphones into the phone right away. When I took the right earphone out of the box, and before I had time to put it in my ear, I heard a female voice telling me in English that “power on” (yes, this will always happen. do not be alarmed if you miss something important while carrying the earphone in your ear). The earpiece automatically went into pairing mode, was detected by the phone and successfully connected. The pairing process can also be initiated by holding down the earphone button for as long as possible (a shorter press will simply turn it off). After connecting the first earphone, I took out the second one, put it in my ear and heard “connected”. After a while the headphones informed me separately that “right chanel” and “left chanel” work ok. Alerts are recorded well enough and do not hurt your ears. In the future, after using the headphones. you just put them in the box, they automatically turn off and go into charging mode. To activate them, you simply need to take out in turn the right, wait for it to connect to the phone, then the left and wait for it to connect to the right. Note: if you take out the left one before the right one connects, the left one will miss the connection time to the right one and you have to repeat the procedure of taking the left one out of the box. Let me say at once. the process is not instantaneous, sometimes the right connects in 15 seconds, and the left “pulls up” to him for 20. Slowly, yes. Claimed to support Bluetooth profiles: HFP/HSP, A2DP, AVRCP.

See also  How to restrict access to your phone

Sound I first listened to music on YouTube, then on standard player, then on PCRadio What can I say In theory I have to describe here either with audiophile slang the pros and cons, which can neither be confirmed nor denied, t.к. Such evaluations are strictly subjective. So I’ll simply describe the impressions of an unspoiled Hi-End and not very competent in the sphere of high-quality sound consumer: 1. On tests, the stereo works fine, no lag, echo, or anything else 2. The sound is clear, without the inherent cheap headphones “sinking” in the highs. In the pauses there is no background noise. 3. The “bass” is present, or rather that part of it, which is usually issued by mid-bass. In tests the “clean” bass breaks through with the expected “grunting”. 4. In the absence of hearing, I am guided by the indicator of obviously bad acoustics in the form of headaches during prolonged listening. So, with these headphones, I didn’t get anything sore and the scars dissolved in 4 hours of continuous listening.

connect, headphones, phone

Subjective conclusion: I liked the sound very much. Like this, no more, no less.

Control in this mode is simple: pressing the button on any earphone simply pauses / resumes the playback (volume control headphones themselves did not realize). However, this control does not always work the same on all players. So. for example, the player in my Xiaomi Mi4c stops and restarts with the button, but the sound level drops to a little more than zero when it resumes (although the sound slider on the phone remains in the same position). And only when you start playing a tune again in the phone, the sound level is again equal to the set. Effective distance from the headphones to the phone. I had about 5 meters through two reinforced concrete walls. Not bad.

QCY QY8 manual in Russian

We hope that thanks to the manual QCY QY8 in Russian you were able to fully acquainted with the features of these wireless headphones from China.

Change codec

This codec is one of the most important settings that directly affects the sound quality of your Bluetooth headset. Poorly chosen codec significantly reduces sound quality and increases the delay between the sound and what happens on the screen, which interferes with video playback and viewing. Correctly chosen codec minimizes delay and sound will be pleasant and of high quality.

To change the codec of wireless headphones you need to enter the developer mode. go to “Settings”, choose “About phone” and click on the line “build number” 5-7 times. Follow the simple instructions when prompted to enter developer mode:

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE