How To Connect Honor 5 Bracelet To Phone

Synchronization error

When attempts to bind the fifth Xiaomi end up with an error connecting the system utility, use the tips:

  • Check the battery charge of the fitness analyzer. Bluetooth connection status, Internet and location determination.
  • Perform the reboot operation for the smartphone.
  • Remember if you used a fitness bracelet with another device. Remove the pairing with the old companion if there was a connection. If it is not possible to perform manipulation, start zeroing the indicators through the gadget menu.
  • Reinstall Mi Fit or use third-party software, for example, Mi master Band.
  • Synchronize the fifth Band with another phone. There may be a problem with the source.

Bluetooth falls off

Situations when Bluetooth is connected for a long time, communication is interrupted and must be turned on manually, occur due to system failures.

  • Open Mi Fit, go to the “Profile” tab, tap on the settings and check for software updates. Or replace the current version, and download the new version from Google Pay or AppStore.
  • Revision the list of active devices over the air. If old gadgets are present, remove.

A recurring problem after the performed actions indicates the incompatibility of the companion module with the Band fitness analyzer or technical problems with the tracker. Visit the wizard to find out the actual source of the problem.

Doesn’t connect to phone

Pairing your fitness bracelet for the first time is pretty straightforward.

  • Download Mi Fit software from Google Play or AppStore.
  • Install on smartphone.
  • Create a profile for a tracker.

The menu is intuitive and in Russian. Usually it does not cause difficulties for users. Especially for those who have used SIMilar devices before. But the lack of contact strains the nervous system. What to do? Perform operations point by point:

  • Didn’t have time to charge the “smart watch”, now it needs to be done.
  • Make sure that the technical requirements are met: operating system Android 6.0 and higher, for iPhone iOS 10.0 and higher, Bluetooth 5.0 is optimal, but versions with 4.2 are allowed.
  • Check if the wireless module is functional. Remove devices that have not been used for a long time from the list. Restart Bluetooth.
  • Turn on GPS. And also in the settings of smartphone applications, allow Mi Fit to search for a settlement.
  • Place the bracelet nearby. You can put it on your arm if that’s more convenient. Remember that the gadget should be no more than 10 meters from the source.

All actions are completed, but Mi Fit still does not see Mi Band 5. Do the following steps:

  • Reboot your smartphone. As soon as it turns on, repeat pairing with the fitness tracker, pre-activate Bluetooth and GPS.
  • Reinstall the software. If upon opening the program asks for permission to send notifications or detect your location, answer yes.

After these manipulations, failures during the initial connection should be eliminated. Otherwise, we advise you to contact the service center to determine the cause. A factory defect is possible, and it is better to return the tracker to the seller under warranty.

Mi band 5 does not connect

Xiaomi Mi Band 5 purchased. The happy owner unpacks the box, retrieves the contents to sync with the smartphone and start using the gadget. But it just doesn’t work out to pair. Although the fifth Band is declared as a device with a stable connection. But no one is immune from such malfunctions. And not always the reason for the failure is only in the clock. We will analyze the arising connection problems in the material and write instructions on how to fix the troubleshooter yourself.

The phone does not see the bracelet

Regardless of the iPhone, Samsung or Honor brand, the Mi Smart Band 5 tracker sometimes loses synchronization for various factors, the companion does not find a partner. Check the network immediately. Is the location search mode and Bluetooth enabled, Internet.

There are two ways to restore the connection. The first is to perform the Hard Reset operation.

  • Go to the gadget menu. Scroll through the tabs, open by pressing “Other”, then “Configuration”, “Reset parameters”.
  • Make sure collaboration is restored.

Use the second method if the first did not help.

  • Start the system application. In the profile of the fitness bracelet, click the “Disable” menu item. Agree to the deactivation procedure.
  • Clear information from the phone cache. To do this, go to “Settings”. “Applications”, tap on the name of the desired program. The function of deleting the cache is located directly in the task list or in the “Memory” tab.
  • Re-sync your smartwatch.

How to connect two bracelets

Joint pairing of two devices to the program is allowed. But SIMultaneously using both in the active state will not work.

For correct synchronization, profiles are created separately for each gadget. For operation, some hours are left active, while others are turned off. The physical parameters are taken into account by the tracker working at that moment. The utility does not automatically determine which of the analyzers is on the hand; you will have to switch to the desired view yourself.

The fifth generation fitness bracelet is a device that guarantees a stable connection to the source. Connection problems are often related to software bugs or misuse. It will not work to work together with the iPhone 5 due to software incompatibility, as well as Android older than the sixth version. The recommendations given in the material will help you find out the reason for the disconnect and get the job done.

How to connect Huawei bracelet to phone

Sports bracelets are becoming very popular devices not only among professional athletes, but also in the lives of ordinary people. Thanks to such modern gadgets, you can keep track of your active and healthy lifestyle.

The most important task of fitness bracelets is calorie control, pedometer data, heart rate calculation. In addition, modern bracelets easily track the quality of sleep, and are also equipped with a smart alarm function, which will prevent its owner from oversleeping an important meeting.

Fitness tracker manufacturers pay a lot of attention to the wide functionality of these devices, and also implemented the ability to connect with a smartphone, which many people appreciated.

Huawei Wear app

If the owner has a smartphone that is not Huawei / Honor, or does not want to use the standard Health application, then after the Huawei Wear program, you need to launch it.

After the application opens, the user will have to agree to the terms of use of Huawei Wear, as well as register their account. The screen displays instructions that you need to indicate to the owner of the bracelet. Everything is intuitive and logical. The user only needs to indicate gender, date of birth, weight at the time of registration of the device, height, as well as the desired number of steps per day. You also need to come up with a nickname and optionally put an avatar.

Thanks to SIMple instructions, you can easily synchronize the fitness bracelet with your phone. The general stages of connecting a tracker and a smartphone are the following:

  • Download the Huawei Wear app;
  • Turn on the sports bracelet and Bluetooth on the phone;
  • Open the Huawei Wear app;
  • In the list, click on the “smart bracelet”;
  • Confirm pairing with the device by pressing the key on the fitness tracker;
  • Register in the Huawei Wear app;
  • If necessary, wait for the firmware update.

After completing these steps, you can quickly set up the alarm on the sports bracelet, choose which notifications will be displayed on the fitness tracker screen, set the time, date, etc.

Pairing a Huawei bracelet with a phone

Undoubtedly, every user of the Huawei sports bracelet wants to use all the functions to the maximum. To do this, you should synchronize your fitness tracker with your smartphone to gain access to all the functions of the device.

To connect the bracelet to the phone, you first need to install the Huawei Wear application specialized for this purpose. To do this, it is preferable to use the Google Play service.

After the application is installed on the phone, you need to turn on Bluetooth and launch Huawei Wear. For these purposes, you can also open the Health application if you have a smartphone of the same model (Huawei or Honor). By the way, there is no need to enter your personal account here.

Health app

Thanks to the installed Huawei Wear app, you can quickly pair the sports bracelet with your smartphone. But besides this program, there is also the standard Health application, which can be found on any modern Huawei or Honor smartphone.

With this application, you can monitor your lifestyle and activity on a daily basis.

You can connect a sports bracelet to a smartphone via the Health app as follows:

  • Go to the Health application;
  • Scroll down and in the “Devices” section select “Smart bracelet”;
  • Then select the model of the Huawei sports bracelet in the displayed menu;
  • After the model is selected, you should press the button “Pair”.

In this case, the sports bracelet must be turned on. Also on the smartphone, Bluetooth must be turned on for pairing.:

Honor Band 5 won’t connect to the phone. Reasons and what to do?

Smartwatches function without lags in work. But if there are problems with the connection, then it is necessary to get ahead of the cause of the problem. The main explanation is that the devices are not connected to each other. Disabled Bluetooth will prevent pairing between the smartphone and the tracker.

How to connect a fitness bracelet Honor Band 5 to the phone: instructions

“How to connect Honor Band 5 to the phone?” Is an important question for owners of a new gadget from Huawei in 2020. Smartwatches have become an essential part of life. The device performs many functions: monitors the quality of sleep (sensors of the Trusleep program), measures the pulse, alarm clock and informs about the weather. The Running Edition plays an important role during training, recording performance. The gadget allows you to keep abreast of the general condition of the body, to react in time to negative indicators. But one of the main advantages of the new version of the fitness bracelet is full interaction with the phone. How to set up this process in this article.

Connecting Honor Band 5 to the phone

Before you start connecting Honor Band 5 to a mobile gadget, you need to download the Huawei Health app by opening the App Gallery, Google Play or AppStore (depending on the base on which the smartphone operates).

After installing the application, click “Open”. Read the terms and conditions displayed by the system, agree to them. Provide access to the Health program.

Enter information about yourself. Your parameters: indicate height, weight and gender. Professional athletes should not miss a single indicator and clearly write each parameter in order to get the most clear results.

Xiaomi

The owners of these gadgets, as well as the owners of models from other manufacturers, need an application from Huawei. After downloading, confirm the agreement. Next, you need to register and provide personal data. Do this as clearly as possible so that the application can calculate normal values. Turn on Bluetooth and search for your device. Select “Honor Band 5″ from the displayed options. Click on the largest button on the tracker and create a connection with Health.

If you have any questions or complaints. Please let us know

Iphone

For those who use iPhone all they need is the AppStore. Open the settings for pairing your smartphone with Health. Don’t forget to set the desired parameters. And turn on notifications to watch your progress.

Samsung

Download Huawei Health first. Then open Google Fit.

  • Turn on the Health app.
  • Click on “Submit Data”.
  • Activate Google Fit by clicking on the button of the same name.

And then just confirm your actions by clicking on Google Fit.

How to pair with other phones

Smart watches from Huawei can be connected not only to smartphones of this brand. They can be used together with Samsung, iPhone and Xiaomi. All you need to do is sync and pair. Please read the instructions below to avoid connection problems. Many users post detailed video reviews of the first activation of the gadget. These videos contain complete instructions in visual format.

Instructions

To connect your phone to the watch, open the Health program, activate Bluetooth. Then follow a SIMple aLGorithm:

  • Add a new device by clicking on the button above;
  • Click on the tracker screen;
  • Find the button “pair Honor Band 5”, agree with the displayed operating rules;
  • Accept the data, indicate the place where you are;
  • After the steps taken, click “Done;
  • Make sure the connection.

Customize Smart-clock depending on individual needs.

Anna Tsygankova (Articles written: 54)

Iphone cannot find device. The clock was already rebooted, reset the settings and the phone also rebooted.

Did this article help you?

Sports bracelets are becoming very popular devices not only among professional athletes, but also in the lives of ordinary people. Thanks to such modern gadgets, you can keep track of your active and healthy lifestyle.

The most important task of fitness bracelets is calorie control, pedometer data, heart rate calculation. In addition, modern bracelets easily track the quality of sleep, and are also equipped with a smart alarm function, which will prevent its owner from oversleeping an important meeting.

Fitness tracker manufacturers pay a lot of attention to the wide functionality of these devices, and also implemented the ability to connect with a smartphone, which many people appreciated.

Connecting smartwatch to iOS phone

Before connecting the smart watch to the iPhone, you should open and activate Bluetooth. After the program detects the gadget, you need to select the name displayed on the smart watch display. After that, you will need to specify the code, which will also be displayed on the dial.

Sometimes the watch and the iOS device do not detect each other. In this case, you should reset all settings to factory settings and try again. As soon as the connection is made, the application will ask you to log into your Gmail account.

Connection completed, but unstable, what to do?

If the Smart gadget and the phone are connected, but it is unstable, check how far the device is from each other: it should not exceed 1 meter. The internet connection can also fail, make sure it is stable. Also try to perform the actions applicable if there is no connection: update the OS and programs to the required version, view Bluetooth activity, make sure that airplane mode is disabled. Further, too, according to the scheme: we try to reinstall Android Wear or reset the parameters.

If you can’t sync

Let’s analyze the popular reasons why devices on android wear do not connect to a smartphone. The first thing to check if your internet connection is enabled is data transfer. If yes, let’s look at 3 more reasons.

  • Updating the operating system and Google applications. Pay attention to device compatibility. Smartwatch on Android wear connects to phones and tablets on android 3 and higher. Check this parameter. In addition to the OS, the device must have Google services 7.3.28 and newer, Google Search 4.0, Android Wear 1.0 application.
  • See if you forgot to turn on Bluetooth on your phone (In the settings, section “Wireless networks”).
  • The Smartwatch should not be in Airplane Mode. Go to device parameters and check.

These are the main moments when the smartphone or tablet does not see the device. If the operating system and programs are of the required versions, airplane mode is disabled, and Bluetooth is active, restart both devices. Factory reset also helps.

Go to the gadget settings, select the “System” section, and then “Disable and reset settings”.

If your phone still doesn’t see your smartwatch, uninstall and reinstall the Android Wear app. Repeat the sync process.

Turn on Bluetooth

Then you need to turn on Bluetooth on your smartphone. We turned it on, saw the Bluetooth icon in the notification area, enabled the smartphone to be detected in the Bluetooth settings. Otherwise, the watch will not see it. If your android version has advanced BT settings, enable reception from unknown devices.

How to connect a smart watch to a smartphone

How to sync Smart watch with smartphone.

  • First, download the Android Wear app from the Play Market, it’s free.
  • On your phone, turn on
  • Turn on the smart watch, launch the downloaded program on the phone, place the gadget at a distance of no more than 1 meter from the smartphone.
  • In the application, click “Configure”, the screen will display the name of the watch, select it.
  • The displays of both devices will show the codes, if they are the same. Click “Connect”, otherwise repeat the procedure.

If the process is successful, the “Connected” icon will be displayed in the Android Wear app.

Health app

Thanks to the installed Huawei Wear app, you can quickly pair the sports bracelet with your smartphone. But besides this program, there is also the standard Health application, which can be found on any modern Huawei or Honor smartphone.

With this application, you can monitor your lifestyle and activity on a daily basis.

You can connect a sports bracelet to a smartphone via the Health app as follows:

  • Go to the Health application;
  • Scroll down and in the “Devices” section select “Smart bracelet”;
  • Then select the model of the Huawei sports bracelet in the displayed menu;
  • After the model is selected, you should press the button “Pair”.

In this case, the sports bracelet must be turned on. Also on the smartphone, Bluetooth must be turned on for pairing.:

Smart watches are multifunctional wrist electronics that have gained widespread popularity lately. Well-known world brands began to produce all kinds of device modifications. But in order to fully use their functionality, you need to decide how to connect the smart watch to the phone and make a complete setup. The procedure may differ slightly depending on the smartwatch model, but the sequence of actions is subject to self-execution.

Mi Fit

Another popular Mi Fit program is designed specifically for Xiaomi branded devices, including a number of fitness bracelets and smartwatches. This application has a lot in common with the previous solution and requires the provision of almost identical information.

  • The main difference between Mi Fit and the previously mentioned options is the need for authorization using an account. If necessary, you can create a new account or use an existing one.
  • Once on the main page of the program, click the “” button in the upper right corner of the screen. From the list presented, you need to select “Clock”.
  • Next, you will be prompted to choose one of the company’s smartwatches and turn on the Bluetooth module.
  • After completing the connection, confirm the pairing with the device.

Don’t forget that your smartwatch also needs activated Bluetooth for successful discovery. In addition, the devices must be compatible with each other.

Adding a smart watch on a smartphone

Further settings are made in the application. We launch it, press the button for adding a new clock, select the clock. If nothing else is BT connected to the phone, there will be little choice. The only device on the list is your watch. If the clock is not visible, we check its visibility through the Bluetooth environment. To do this, just go to the Bluetooth settings and see if they are on the smartphone screen. If not, we reboot both devices, in general, as in the series. If the reboot did not help, Google by the model of our phone “the clock is not visible via Bluetooth”.

If they are there, we try to update the application.

After completing all the steps, give the watch some time to sync. When you see the same time on the watch as on the smartphone, you can consider the connection process complete.

Now you can open the app and manage notifications, set alarms and generally enjoy your purchase to the fullest.

Smart watches, like other modern portable gadgets, are very popular among owners of Android devices. For the purpose of more convenient use of each such device, the developers have implemented synchronization via a Bluetooth connection. In the course of the article, we will tell you how to properly connect a smartwatch to any smartphone.

Samsung

Download the Huawei Health app to Samsung. Now you need to pair the app with a special Google Fit account:

  • Turn on the Health app.
  • Look for the item “Sending data” in the menu.
  • Press the button next to your Google Fit account.
  • Confirm connection.
  • In the window that opens, click on the Google Fit account.

Xiaomi

Xiaomi owners download the Huawei app and install it. After opening the application, we confirm the agreements. Next, register and indicate your personal data (number of years, weight and height). We connect via Bluetooth and find the device. In the drop-down list, select “Honor Band 5”. Click on the big button on the bracelet and connect to Health.

How to pair with other phones?

Smart watches can be connected to other phones. Advantage is using the tracker on Samsung, IPhone and Xiaomi. To do this, you need to synchronize programs and make pairing. Problems may arise when turning on, so we recommend using the instructions.

If you have any questions or complaints. Please let us know

Instructions

You need to pair Honor Band 5 with your phone in the following way:

  • Open the Health app and turn on Bluetooth.
  • In the upper corner of the display, add a new device, namely Smart watch.
  • Then press Honor Band 5.
  • Look for the “Pair” button and agree to all conditions. Accept data, set location and sync information.
  • Confirm the steps taken with the “Done” button, check the connection on the device.
How To Connect Honor 5 Bracelet To Phone

Smart watch setting is based on needs. In the column “Settings” set the parameters. If you need to monitor your sleep quality, use Huawei TruSleep. After switching on, a detailed analysis of the sleep duration will begin. After analyzing the data, you will be able to understand whether you are sleeping enough, at what time of the night the sleep is more sound. This knowledge will help improve sleep and your health.

The Running Edition is essential for running training. Plug in the function and record every physical activity. Check your kilometers, activity and calories lost. Ideal for recording workouts.

How to connect Honor Band 5 to the phone: smart bracelet pairing instructions

How to connect Honor Band 5 to your phone? In addition to the old functions: health tracking, heart rate reading, pedometer. New ones have been added. Now the Smart watch detects the quality and duration of sleep, calculates the level of oxygen in the blood and warns of possible dizziness. They have highly sensitive sensors that determine the current state of a person. You need to wear the bracelet constantly, even in a dream. Then in the morning you will receive a full report on the quality of sleep. Got a tracker and don’t know how to pair it with your phone? Use a quick guide.

Connecting Honor Band 5 to the phone

How to connect Honor Band 5? The clock is synchronized to the smartphone via Bluetooth. However, before that you need to install the dedicated Huawei Health app. Download it from App Gallery, Google Play or AppStore depending on your phone model.

After downloading, click the “Open” button. You open and agree to the terms. Provide access for embedded Health.

Next, enter the basic parameters and fill in information about yourself. In the profile, enter the date of birth, height, weight and gender is required. This is necessary for the maximum display of health indicators. For active people and athletes, there are many characteristics to set. The more information you provide, the more accurate your results will be.

Iphone

Iphone owners also need to download the app from the AppStore. Next, go to the settings and pair the phone with the Health program. Set the required parameters. Turn on notifications for productive work.

Honor Band 5 won’t connect to the phone. Reasons and what to do?

Smart watches work without interruption. However, if you are faced with a connection problem, then you need to understand the reasons. The main reason is the lack of connection of devices. If Bluetooth is turned off on the smartphone, then the watch is not paired. Also try restarting your mobile phone and watch. The system may be frozen and require a small reboot. Then try to reconnect.

Why does the fitness bracelet not connect to the phone. Causes of problems and their solutions

Modern trackers are an integral part of sports.

They control the main physical indicators of the athlete, allow you to adjust the training plan, signal initial health problems.

And yet, like any gadget, they can malfunction.

One of the most common user questions on specialized forums is why the fitness bracelet does not connect to the phone.

There can be several reasons for this “behavior” of the device, and each has its own solution.

Loses connection and disconnects

Loss of connection after successful pairing most often occurs for 2 reasons:

  • The tracker is discharged;
  • The distance between gadgets exceeds the maximum allowable value.

For different models, the working distance varies from 7 to 30 meters. On average, the indicator of correct communication is 10-12 meters.

Another reason for desynchronization can be a failure in the old version of the application. Therefore, users need to follow the updates and install them on their smartphone in a timely manner.

TOP 5 least problematic gadgets

Users call the most problem-free fitness bracelets:

  • Xiaomi Mi Band. Trackers of this line have been in the top three for several years already. This is one of the best value for money examples in the sports gadget market. Each generation delights with new features and SIMplified controls.
  • Samsung Gear Fit. The devices of this brand have long become the standards of quality and advanced technology. Their functionality is much richer, but this affects both autonomy and price.
  • Smart Band Honor. The closest competitor is Xiaomi Mi Band, released by Huawei. It has a slightly more extended list of functions, but it is quite comparable in price, autonomy and reliability.
  • Garmin Vivofit 3. Trackers of this brand are among the most durable and safe. Failures are extremely rare, the device is additionally equipped with GPS, and its heart rate monitor is considered one of the most accurate.
  • Colmi S908 GPS Sports. Not the most famous tracker in our country. However, it is one of the top 5 best-selling fitness bracelets on AliExpress, along with the likes of Xiaomi and Honor. An excellent choice for those who prefer fresh air to stuffy gyms. Robust, reliable tracker with enhanced moisture protection and GPS sensor.

Also very popular are the Amazfit Cor, Polar A370 and FitBit Charge bracelets.

Finding out the causes of the main problems

The use of the sports tracker is carried out in conjunction with the application installed on the smartphone. Each bracelet company develops its own program to help the athlete in training and monitor his physical activity.

However, before using it, you need to synchronize your gadgets, that is, in other words, connect the tracker to your phone. This process can be carried out in 2 ways: via a USB cable and via a Bluetooth wireless module. In some cases, when trying to connect, problems of the following nature arise:

  • Bracelet and smartphone do not see each other via Bluetooth;
  • The mobile device does not allow syncing;
  • The tracker regularly loses connection and disconnects from the smartphone.

The solution in each case has its own characteristics associated with the model of a sports gadget, however, the basic principle is approximately the same.

Doesn’t connect, smartphone doesn’t allow pairing

In some cases, users noted that although the mobile device finds a fitness bracelet, it does not pair with it.

Most often this happens due to failures in the application or the use of a Bluetooth version not supported by the tracker, therefore, before using a sports gadget, you must familiarize yourself not only with the instructions, but also with the declared technical requirements. Most devices work with Bluetooth version 4.2 and higher. If your phone has an older app, the sync request may be rejected.

The tracker does not see the smartphone via Bluetooth

The wireless module is designed to facilitate and speed up the data transfer process. However, sometimes there are failures in his work. The reasons for this are:

  • Lack of turning on Bluetooth on one of the devices;
  • Too much distance between gadgets;
  • Discharge of the tracker battery;
  • Incorrect software operation;
  • Strong interference.

In most modules, devices are synchronized after installing the program on the phone. The application (provided that Bluetooth is connected on the phone) itself finds the nearest devices and offers to choose which one to connect to. However, for the “Bracelet” option to be highlighted in the list, the wireless module must also work on the latter. Its inclusion, in most cases, is made from the menu by pressing the “On” button.

Useful video. What to do if problems are found: available solutions

In most cases, the solution to the problem of lack of synchronization does not depend on the tracker model, since the principle of operation of the gadgets is the same.

If there is no Bluetooth connection, you must:

  • Check the module connection on both devices;
  • Determine the state of charge of the bracelet;
  • Restart the tracker and phone;
  • Shorten the distance between them.

If the smartphone refuses to pair, you need to check the Bluetooth version and, if necessary, download a new one.

Users cannot bind the bracelet to the phone because of the incorrectly installed application. The solution to the problem will be to remove the already downloaded software and install a new one that meets all the declared parameters.

Timely updates will also resolve the desync issue.

Doesn’t sync

The SIMplest reason for the lack of pairing between devices may be the disconnection of the fitness bracelet. This is most often due to a low battery charge.

The tracker does not sync even if the required application is absent. Every smart bracelet company immediately launches the corresponding software on the market. Using a tracker means using an application from the same manufacturer. With other software, the sports gadget may not sync or work incorrectly.