Article

How To Connect Av Receiver To Tv

How to connect an AV receiver to a TV (using the Onkyo AV receiver as an example)

Have you finally become the owner of such a wonderful device as Onkyo AV receiver? Well, then the first thing you take up after unpacking the product is installing it, choosing a location and connecting the AV receiver to a TV, personal computer and / or other devices. And this is quite logical, since it is the receiver that will become the heart, ensuring the smooth functioning of the entire “organism” of the speaker system. Given the importance of this device for the smooth functioning of your audio system, you should pay due attention to the issue of connecting it to all components of the system (including the TV). In this article we will talk about the general principles of connecting this product.

Have you finally become the owner of such a wonderful device as Onkyo AV receiver? Well, then the first thing you take up after unpacking the product is installing it, choosing a location and connecting the AV receiver to a TV, personal computer and / or other devices. And this is quite logical, since it is the receiver that will become the heart, ensuring the smooth functioning of the entire “organism” of the speaker system. Given the importance of this device for the smooth functioning of your audio system, you should pay due attention to the issue of connecting it to all components of the system (including the TV). In this article we will talk about the general principles of connecting this product.

Connecting an AV receiver to a TV: principles you need to know

The first principle: use the optimal type of connection for your case, the best in quality of processing, transmission and broadcasting of both audio and signals. If we talk about the signal, then the palm belongs to this type of connection as HDMI. The component connection method transmits a slightly lower quality signal, the composite connection type is even weaker and closes this series, which is practically unsuitable for transmission. the RF connection method. As for the transmission of an audio signal, there are even fewer options: the same HDMI (but not all models of receiving devices support this mode); almost inferior to it in quality and is a fairly popular digital connection method (the connection is made using a “coaxial” wire or optical cable); the third connection method is used a little less often. analog.

How To Connect Av Receiver To Tv

Second principle. The principle of maximum simplification of the connection. In other words, the simpler the connection between the components, the better the signal. In practice, this means that the communication chain between the components should consist of as few cables as possible. This way you minimize the chance of interference. In addition, in the event that a gap occurs somewhere, it will be much easier to determine its location, since you do not need to check each of the many cables (if you connect the devices with one wire).

Third principle It is probably the easiest to understand, but not always affordable. This principle lies in the use of the highest quality wires and cables used to connect any components to the receiver. Connecting your audio system is not the best article to save costs. After all, it is ultimately the quality of the cables that determines the quality of the resulting image and sound. In addition, it is important to use the shortest wires (again, to minimize the risk of interference). The shorter the distance the signal needs to travel, the greater the guarantee that it will be clear and undistorted.

The best solution for connecting the receiver with the TV today is to use an HDMI cable. One end of this wire must be inserted into the receiver’s connector (if we connect the Onkyo AV receiver, then this connector must be searched on the back of the product). It is designated as HDMI Monitor Out. We connect the second plug of the cable to the TV, inserting it into the connector labeled HDMI Input.

Nuance: such marking is present only on models with a liquid crystal or plasma screen! If your TV is not equipped with such a special input, connect in component mode.

TURBION.NET 2021