How to connect an external hard drive to a computer

How to connect a hard drive to a computer

You bought a brand new hard drive for a computer and do not know how to connect it?! In this article I will try to tell about this in detail and accessible.

To begin with, it should be noted that the hard drive connects to the motherboard or through the IDE integer, or through the SATA Inte Wee. The IDE Inte Wee is currently considered obsolete, as it was popular in the 90s of the last century, and new hard drives are no longer equipped with it. The SATA Inte Weeve has been found in all computers that have been produced since about 2009. We will consider the connection of the hard disk with that and with that intese.

How to connect an ordinary hard drive as an external?

In the event that you have a regular hard drive that you would like to make external, then you can not do without additional equipment. We are talking about special boxing, in which the children’s disk will be invested.The advantages of this method are obvious: firstly, an independent external hard drive will cost you much cheaper than a ready-made option, and secondly, you can collect your own external hard drive for the individual selection of all the required characteristics.

What will be needed for independent assembly of the external hard drive:

  • HDD;
  • Suitable boxing;
  • Connection cable;
  • Speech of medium or small size (size must be clarified after choosing a box).

Stages of assembly of an external hard drive

Using a screwdriver, disassemble the box body. As a result, you should get two halves, one of which is a controller (cover), and the other is a “”.2. Now a hard drive is used. You need to insert it into the “” of boxing in full accordance with SATA contacts. The hard drive should enter the box easily, without using additional efforts.3. Connect the second boxing element and fix the hard drive with screws. Now the external hard drive is ready for operation. Connection of such a device is performed in exactly the same way, as described above.

Possible reasons

Most often, a computer or laptop does not see a removable hard drive due to the error of formatting the section, using the wrong file system, breakdown of the USB port or the absence of the necessary drivers, but there may be other reasons. In the worst case, this may mean that the hard drive has failed. It should be noted that the principle of operation of large external HDDs and flash drives is identical, so that the problems associated with them are usually solved equally. You can familiarize yourself with the identical material on the invisibility of memory cards on various devices.

First of all, you need to find out why the external hard drive is not determined. To do this, connect an external drive to a computer. If this is a full.Fledged hard drive, then it is necessary to enable food on it. Some heavy removable HDDs can even be connected to the power grid using a separate cable. After the connection, you need to open the drive control tool. To do this, the Windows R key combination is used. Diskmgmt must be entered into the line that appears.MSC and press Enter.

Now you should see the external HDD in the list of all available drives. It will appear here even if it does not recognize Explorer on Windows XP due to the lack of sections. If the external hard drive is determined, but does not open, then it must be formatted properly, after which it will be recognized by various devices. In the case when the drive could not be detected even here, the reason may be something else.

What to do if the external hard drive is not determined? This can be caused by the hardware breakdown of the USB port, the absence of the required driver or the failure of the accumulator. First of all, you need to try to launch a disk through another free connector. If, after such a procedure, the opened HDD works fine, then the reason was in the USB broken port. It happens that the connectors on the front of the computer housing have limited functionality and cannot ensure the normal performance of the external hard disk. It is recommended to use USB ports located behind.

See also  How to know the state of your Samsung battery

How To Fix External Hard Disk Not Detecting In Windows (No Drive Letter)

How to connect an external hard drive via USB

The amount of information that the user stores on his computer is increasing every year. Therefore, many are faced with a problem when there is practically no free space on the computer. We throw off photos and videos from a digital camera on it, upload a brand new movie, which we plan to watch in the future and so on. As a result, the hard drive is overloaded and the computer begins to hang.

Buying an outer hard drive will help to solve this problem. On it you can throw off all the necessary information, access to which will not differ from access to information on a hard drive in a computer. In addition, you can connect an external hard drive to a computer, laptop or TV, via a USB connector.

Now let’s figure out how to correctly connect an external hard drive via USB to the selected device.

When connecting an external hard drive to a computer or laptop, you need to connect a cable on one side, using a USB or Mini-USB plug, to the disk, and the other end of the cable, with a USB-player, connect to the computer in a USB port. Then wait until the computer finds a new device.

If you have connected an external hard drive, and it does not work, this is typical for hard drives, the volume of which is more than 2 terabytes, consider another connection method. The reason in this case may be the usual lack of power for a hard drive. The fact is that it eats from a computer USB port, which does not always give out the 5 volts discs for the work. In this case, you will need to use a special USB-cable with a branch or y-cable.

Connect the mini/micro-USB plug to the hard drive, and connect two plugs to the USB ports on the computer from the other end of the cable. Data is transmitted through the main USB stoker, another USB-stroke is used to serve additional power.

Use to connect a Y-cable that came with a hard drive. If this was not there, then he will have to buy. Sometimes there is an additional cable with the disk, which can also provide the necessary meals.

There are several more reasons why the external hard drive does not work:

Not enough power through a USB port. This can happen if you connected the disk to the USB ports located in the front of the system unit. Then just connect it to the ports behind the system, directly to the motherboard.

The hard drive may be faulty. Take it to diagnostics.

Defective USB port-connect to another port.

Cable problem. You need to purchase a new.

If a lot of films, videos or photos are stored on the hard drive, then you can provide their comfortable viewing by connecting an external hard drive to the TV. There are no difficulties in this. The main thing is that there is a free USB port on the TV, and preferably two ports.

If there is not one USB port on the TV, but several, and one of them is signed by HDD in, stick the main plug for the outer hard disk in it. Stern for supplying additional power supply to the port nearby.

Turn on the TV, click on the console button Source or Input and look for a section with a hard drive.

I will finish on this. I think now you understand how to connect an external hard drive via USB to a computer, laptop or TV.

Webmaster. Higher education in the specialty “Information Protection”. Creator of the Comp-PROFI portal.Com. The author of most articles and lessons of computer literacy

P.S. The problem of connecting an external HDD (drive, hard drive, hard drive) to the TV. Solved!! Must correct his previous statement regarding the replacement of MBR with GPT or vice versa, the problem is deeper. The GPT table standard is necessary to read the drives of more than 2.2 TV (limit for MBR), while the computer reads without restrictions. And increases the life of HDD. Working with me, with a Panasonic TX-49DXR600 TV, HDD Seagate STEL8000200 (8 TB) drive has the following parameters: GPT, NTFS, a cluster of 8 sectors of 512 bytes, has a section (logical disk) MSR (Microsoft System Reserved) size 128 MV). The MSR section does not matter on the drive, and is used, most likely, for alignment (displacement of 1024 kV) and as a buffer memory for the controller. It is created by Diskpart, which is in Windows. The parameters mean that this drive has an old magnetic track. 512 bytes (the size of the sector is physically not altered), and most modern drives (starting since 2010) are made in the new Advanced Format. A new sector marking format, 4096 byte (4 sq. ). Thus, it can be stated that the problem of most of the inability of the drives in the amount of the sector 512 or 4096 bytes. Unfortunately, this technical parameter is not indicated by manufacturers. You can determine it as follows: on the computer, put the cursor on your external HDD, press the right mouse key and select “format”. In formatting parameters when choosing the size of the cluster, the minimum is indicated, this will be the size of the sector (512 or 4096 bytes). Therefore, demand from the seller to specify the size of the HDD sector. In my case, you can use discs with sectors of 4096 bytes (I have two of them) in format with the FAT32 file system, which limits the size of the 4 Gb file size. For low.Resolution films. It will come. To reduce the size of the video file, I recommend a free Avidemux 2 program.6, which allows you to reduce the size and quality of the “flow” and divide the file into parts, in addition, copy the video from one container to another (for example, from.AVI century.Mkv) without loss of quality and convert one video or audio codec into another, since not all containers and codecs are read by televisions (software problem). The problem that the TV reads the NTFS file system with 512 bytes sector, and does not read NTFS from 4096 bytes, is the inferiority of the USB controller driver installed on TV. If both markings are not read. Format in the FAT32 file system, it is supported by flash drives. Sometimes the driver does not support GPT, then replace it with MBR. To format in the FAT32 file system, you need to use the Paragon Hard Disk Manager program or the like. Using Windows for FAT32 there are restrictions. Demand from the manufacturer of the driver of the driver updates (for a USB controller) with support for HDD NTFS format with marking 512 and 4096 bytes.

connect, external, hard, drive, computer

Connection of the “old” disk in Windows

If the hard drive was already used in Windows, then it has already been formatted. In this case, when connecting, it will automatically be assigned a letter in the system, and it will appear in the Windows conductor, already ready for use.

See also  How to check your balance on your computer

The old formatted hard drive when connecting will automatically appear in the Windows conductor with a given letter and ready for use

If the disk does not appear in the system, it may be necessary to install the driver for the hard disk housing.

Press the keyboard “Winr” keyboard. In the launched window “Perform” to dial “Devmgmt.MSC “and click” OK “.

The “Device Manager” will start. View the dispatcher to the presence of devices in it with signs of exclamation. If such a device is available, click on it with the right mouse button, and select in the menu the left button “Update the drivers”.

Click on a device with a yellow exclamation mark with the right mouse button, with the left button on the “Update Drivers” item

In the launched window, click on the “automatic search for updated drivers”.

How to connect external hard disk to laptop

After the system is the system of the desired driver, the exclamation mark from the device in the “dispatcher” will disappear. You may need a reboot PC.

If the hard drive in the system did not appear, and at the same time, a CD-disk with drivers is included with the HDD case, then you need to:

Insert this disk into the laptop optical disks, opening it by pressing the button and snaping it back after installing CD.

We insert a disc with drivers into the laptop’s optical disks, opening it by pressing the button and snaping it back after installing CD

On the desktop twice the left button mouse click on the icon “This computer“.

See also  The monitor is black but the computer is working

The list of discs and devices of Windows OS will open. Open the CD drive disc of a double click.

Find in the folders the launched file “Run” or “Setup”, twice clicking on it with the left button.

Set the required software in accordance with the proposed procedure. HDD will appear in the system.

Preparation for the assembly of external HDD

As a rule, the need to create an external HDD arises for the following reasons:

  • There is a hard drive in stock, but there is no free space in the system unit, or the technical possibility of connecting it;
  • HDD is planned to take with you on trips/to work or there is no need to permanently connect through the motherboard;
  • The drive must be connected to the laptop or vice versa;
  • Desire to choose an individual appearance (case).

Typically, such a solution comes to users who already have a regular hard drive, for example, from an old computer. The creation of an external HDD from it can save money on the purchase of a regular USB drive.

  • HDD;
  • Box for a hard drive (a case that is selected based on the form factor of the drive itself: 1.8 ”, 2.5”, 3.5 ”);
  • A screwdriver of small or medium size (depending on boxing and screws on a hard drive; may not be required);
  • Mini-USB wire, micro-USB or standard connecting usb.

Procedure for connecting

The first thing to do is determine the type of HDD connector, which is planned to be connected via USB. Plugs are the following types:

SATA (more modern connector, used in PC fresh assembly and in laptops);

IDE (can be found mainly in “experienced” PC).

The connection will be considered using the example of AgeStar FubCP, as it supports both “old” and modern HDD. Average

The device is equipped with three intenses (plugs):

Description of AGESTAR FUBCP connectors below.

The system does not see the external disk

The reasons causing such a problem is several. If a new disk is connected, then perhaps Windows “forgot” to inform ”and offer to install the drivers, format the carrier. In the case of old drives, this can be the creation of sections on another computer using programs, the presence of a blocking virus, as well as the usual malfunction of the controller, the disk itself, the cable or port on the PC.

Another reason is the lack of power. We’ll start with it.

Option 2. Connection of the outer hard disk

Often users choose an external HDD connection. This is much simpler and more convenient if some files stored on the disk are sometimes needed outside the house. And in the situation with laptops, this method will be especially relevant, since a separate slot for the second HDD is not provided there.

The external hard drive is connected by means of USB exactly the same as the other device with the same intenses (flash drive, mouse, keyboard).

A hard drive designed for installation in a system unit can also be connected via USB. To do this, you need to use either an adapter/adapter or a special external body for a hard drive. The essence of the operation of such devices is similar. Through the adapter, the desired voltage is supplied to the HDD, and the connection with PC is carried out through USB. For hard drives of different form factors there are their own cables, so when buying, you always need to pay attention to the standard that sets the overall dimensions of your HDD.

connect, external, hard, drive, computer

If you decide to connect the disc with the second method, then follow literally 2 rules: do not neglect the safe extraction of the device and do not disconnect the disk while working with PC to avoid errors.

We talked about how to connect the second hard drive to a computer or laptop. As you can see, there is nothing complicated in this procedure and it is completely optional to use the services of computer masters.

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE