How to connect an Apple watch to a new iPhone

connect, apple, watch, iphone

Apple watch series 3 how to connect to iphone 5

To use Apple Watch Series 1 or later with watchOS 5, you need to sync it with iPhone 5s or later with iOS 12 or later — Apple Watch Checkered models requires an iPhone 6 or later. The setup assistants on your iPhone and Apple Watch work together to help you pair and set up your Apple Watch.

Warning: To avoid injury, read the Important Safety Information for Apple Watch before using your Apple Watch.

Pairing Apple Watch

Open Apple Watch app on your iPhone.

Tap my watch, then tap your Apple Watch at the top of the screen.

Click next to the Apple Watch you want to disconnect, then click Pair Apple Watch.

Pairing problems?

If you see your watch face when you’re trying to pair: your Apple Watch is already paired with your iPhone. You need to first uninstall all Apple Watch content and factory reset.

If the camera does not start the pairing process: Click to pair your Apple Watch manually at the bottom of the iPhone screen, and follow the onscreen instructions.

A pair of more than one Apple watch

You can pair with another Apple watch in the same way you paired your first one. Bring your iPhone to your Apple Watch, wait for the Apple Watch pairing screen to appear on your iPhone, and then click Pair. Or follow these steps:

Open Apple Watch app on your iPhone.

Tap my watch, then tap your Apple Watch at the top of the screen.

Press a pair, new watch, then follow the onscreen instructions.

Quickly switch to another Apple watch

Your iPhone detects the pair of Apple watches you are wearing and automatically connects to it. Just put on another Apple watch and raise your wrist.

You can also select the Apple clock manually:

Open Apple Watch app on your iPhone.

Tap my watch, then tap your Apple Watch at the top of the screen.

Turn off the circuit breaker.

Pairing Apple Watch with a New iPhone (How To). Netcruzer TECH

To see if your Apple Watch is connected to iPhone, touch and hold your finger at the bottom of the watch screen, swipe up to open Control Center, then look at the connected state icon.

Turn on, pair, and set up your Apple Watch

Place the watch on your wrist. Adjust the strap so your Apple Watch fits snugly yet comfortably on your wrist.

For information on resizing or changing bands on your Apple Watch, Watch, Delete, Resize, and Fix Apple Watch bands.

To turn on the watch, press and hold the side button until you see the Apple logo.

Bring your iPhone to your Apple Watch, wait for the Apple Watch pairing screen to appear on your iPhone, then tap continue.

Or open the Apple Watch app on your iPhone and then tap on a couple of new watches.

When prompted, position your iPhone so that your Apple Watch will appear in the viewfinder in the Apple Watch app. These are pairs of two devices.

Tap Set up Apple Watch. Follow the instructions on your iPhone and Apple Watch to complete the installation.

Tip: If you have vision problems with your Apple Watch or iPhone, VoiceOver or “zoom” can help — even during setup. See setting up Apple Watch. using voiceover or use zoom on Apple Watch.

While it’s pairing with your iPhone, Apple Watch gives tips on how to interact with it. Touch display, digital crown, and side button to learn more.

You can activate cellular on your Apple Watch with Checkered during setup. If you don’t want to, you can activate it later in Apple Watch app on your iPhone. See using an Apple Watch with a cellular network.

Your iPhone and Apple Watch must use the same cellular carrier. Cellular communication is not available in all regions.

A couple of Apples look at the new iPhone

If your Apple Watch is paired with your old iPhone and now you want to sync it with your new iPhone, follow these steps:

Use iCloud to back up iPhone is currently tied to your Apple Watch (see iPhone User Guide for more information).

Customize your new iPhone. On the Apps & Data screen, tap Restore from iCloud Backup and then select the most recent backup.

Continue iPhone setup and, when prompted, select to use Apple Watch from your new iPhone.

When iPhone setup is complete, your Apple Watch device will prompt you to sync it to your new iPhone. Click “OK” on your Apple Watch, then enter its password.

For more information, see the Apple Support article Switch Apple Watch to a New iPhone.

With your iPad

Once you connect Airpods to your iPhone, iCloud will automatically pair it with your iPad that you signed in with the same Apple ID.

From a Windows PC or Android device

You can connect wireless headphones to third-party devices in the same way as any other Bluetooth device. Just put Airpods in pairing mode (check method above) → go to Bluetooth settings on your device and select headphones.

With Apple TV

  • Open “Settings” on Apple TV.
  • Then you need to click “Remotes and Devices” → “Bluetooth”.
    (or General → Bluetooth on “Apple TV” 3rd generation or earlier).
  • Find your headphones in the list and select them.
  • Now you need to select “Forget device”.
  • Select “Forget device” again to confirm.

From Mac

  • First go to System Preferences → click the Bluetooth icon.
  • Now you need to right click on your Airpods under Bluetooth devices.
  • Select Delete.
  • You will need to click “Forget device” again to confirm.

With Apple TV

  • Open the Airpods Charging Case.
    Then you need to press and hold the pairing button located on the back of the case until the indicator flashes.
  • Then you need to launch Settings on your Apple TV.
  • Click Remotes and Devices → Bluetooth.
  • Finally, select Airpods from the list.

With your iPhone

  • Unlock your iPhone and go to Settings → tap Bluetooth → turn on Bluetooth.
  • Open the Airpods case (hold the Airpods inside) and bring it to your device.
  • Press and hold the return button on your Airpods Charging Case.
  • Then a small window will appear on your iPhone. Tap Connect. (The installation guide appears on the screen.)
  • If you’re using Airpods Pro or Airpods 2, you can set up Siri. Click Use Siri and follow the instructions.
  • Tap Done.

If you’ve previously connected your Airpods to an iPhone, follow these steps:

  • Unlock your iPhone.
  • Open the Airpods case and bring it to your iPhone.
  • Tap Connect, then tap Done.

Note. If you are unable to connect Airpods to your iPhone, try the following:

  • Make sure your device has the latest version of iOS.
  • Go to Control Center and check if Bluetooth is activated.
  • Go to Settings → Bluetooth. Make sure your Airpods are selected as audio device.
  • If all else fails, reset your Airpods. Then wait 15 seconds before reconnecting.

With Apple Watch

The steps are the same as for iPhone. In addition, as soon as you disconnect Airpods from iPhone, they will automatically disconnect from Apple Watch.

  • Go to settings.
  • Tap Bluetooth.
  • Then click the i icon next to your Airpods.
  • Click “Forget Device”.
  • Click “Forget Device” again to remove Airpods from all devices in your iCloud account.

Preparatory work

The synchronization process is quite long and power-consuming, so you should take care of the high charge level of the Apple Watch. You can charge it either before synchronization, or right during installation. No significant difference found.

Do not forget that Apple Watch is a new device and does not support all models of smartphones. To sync, you need an iPhone 5 or older model with an updated iOS firmware to the latest version. The corresponding Apple Watch control app can be downloaded from the App Store.

Make sure you have an available Wi-Fi or mobile network to connect your iPhone. In Settings. Bluetooth, turn on Bluetooth. Bring your Apple Watch as close as possible to your iPhone and you’re ready to start.

connect, apple, watch, iphone

How to connect Apple Watch to iPhone

The Apple Watch is great in and of itself, and perfectly fulfills the role of a wristwatch. Wanting to get access to additional functions and unleash the full potential of smartwatches, you cannot do without synchronization with a smartphone. Connecting Apple Watch to iPhone may seem like a simple matter, but it has several very important nuances, which we will tell you about today.

We start syncing

After pressing the side button of the Apple Watch, after a few seconds the welcome screen will light up, after which you will be prompted to select the interface language. In case of an incorrect choice, after synchronization with smartphones, in the settings menu, the language can be changed to the correct one.

Launch the Apple Watch app from the iPhone and select the option to pair with a smartwatch. The phone will ask you to point the smartphone camera at the watch in a certain place, after which the pairing of devices will begin.

In case of unsuccessful connection, the operation can be performed manually. The Apple Watch display contains a small button called “I” (eng. I), by clicking on which a 6-digit code will appear. Entering this code into the application on a smartphone will bind one device to another.

The watch prompts you to choose the hand on which you will wear your Apple Watch. If you already have experience with a smartwatch, the settings can be loaded from a backup. Those who put on such a watch for the first time will have to pass a small test for calibration. We carefully read all the clauses of the terms of the license agreement (or not) and put an approving tick. Confirming your Apple ID password will open features such as Digital Touch, Apple Pay, and Handoff.

Set a password on your Apple Watch so that no one else has access to your personal data. The longer and more confusing the password, the better for you and your security.

The last point is syncing iPhone apps to Apple Watch. By selecting the “Install All” button, all programs available for smart watches will start synchronizing with the Watch. Not wanting to waste your precious time on this, click “Later” and only contacts, messages and mail are synchronized with the smart watch. The duration of synchronization depends on the volume of the selected applications, and you will be notified of its end with a sound signal.

Connecting Apple Watch to iPhone will not take you long if you follow the indicated points and carefully read what is offered to you. A Little Time, Little Effort, and Apple Watch Ready to Robot.

How to connect Apple Watch to iPhone?

I think everyone who has already acquired an Apple Watch or is just going to do it understands that this gadget was created to live in close contact with the iPhone. The target accessory, so to speak. The novelty works with all models, starting with the iPhone 5. So, you have become the proud owner of the new product and where to start meeting and chatting with a new friend?

Step 1. Connect the charger to the watch.

Simply plug in the included charger and secure the magnetic end to the back of your Apple Watch.

Step 2. Turn on Apple Watch.

Hold the side button for 1 or 2 seconds and you will see the Apple logo. Then select your language. Don’t panic if you haven’t found Russian on the menu. He’s really not there. At least for now. Nevertheless, the accessory perfectly perceives all notifications, names of contacts and other words in Russian. No krakozyabr.

Step 3. Open the Apple Watch app on your iPhone.

A message will appear on the watch screen asking you to open an iPhone app that you wisely pre-installed. Everything, the connection process has started!

Step 4. Point your smartphone camera at the Apple Watch screen.

Basically, you only need to do what the application asks for and everything should happen automatically. If suddenly something failed, try to do everything manually, which is also very simple. Click “i” (“i”) on the display of your novelty and you will see the name of your watch. Then, in the iPhone app, select that title as soon as it appears. After that, the watch will show you a six-digit code that you need to enter into the application on the iPhone.

Step 5. Agree to all terms and conditions and create a password.

After all the above manipulations, you will need to link the devices via iCloud. You accept all the conditions (you have no choice. the money has been paid), create a password. everything is as usual: the more complicated the better. And most importantly, immediately write it down in a daddy with passwords on your, most likely, iMac or MacBook.

Step 6. Decide if Apple Watch will be unlocked via iPhone.

This question will pop up on the watch display on its own. The bottom line is that when the watch is on your wrist and paired with an iPhone, you don’t need to enter a code. Do you agree? Then take this option. Don’t worry if you suddenly change your mind later, you can always undo it.

Step 7. Wait for synchronization.

In general, we put the watch aside and go drinking tea for about 10 minutes. Meanwhile, all applications installed on the iPhone and that are optimized for Apple Watch will be in the device’s memory.

Step 8. If you need to cancel pairing and install something else, then repeat all of the above. The good news is that the iPhone saves a local backup automatically so you can restore your database whenever you want.

Step 9. We use, enjoy and enjoy life together with a new product from Cupertino, or rather, from China.

How to unpair with a watch without a phone?

In the absence of an iPhone and the ability to unpair, you can erase content and settings on your Apple Watch as follows:

  • On your Apple Watch, go to Settings General Reset Erase Content & Settings.
  • For GPS Cellular models, you can save or delete your cellular data plan.

How to unlink watch from iPhone?

How to unlink watch from iPhone

  • Launch the Watch app on iPhone.
  • Go to My Watch and select a device.
  • Click the info button next to the clock.
  • Tap Unpair Apple Watch and confirm.

How to unlink Apple Watch from account?

On your computer, go to the Find My iPhone page on iCloud.com and sign in with your Apple ID. Click All Devices and select your Apple Watch. Click Erase Apple Watch. Press “Next” until all data is erased.

How to remove an account from Apple watch?

  • On your computer, go to iCloud.com and sign in with your Apple ID.
  • Open Find My iPhone.
  • Click All Devices and select your Apple Watch.
  • Click Erase Apple Watch.
  • Click the delete button next to your Apple Watch.

Is it possible to connect Apple Watch to Android?

There is no application on Google Play and it is unlikely that there will be an application for connecting the coveted gadget to the operating system of the main competitor. Apple Watch cannot be connected to an Android smartphone via Bluetooth to receive call and notification notifications, as it does with other smartwatches.

How to connect Apple Watch to a new iPhone?

Need more help?

  • Erase data from Apple Watch.
  • Set up your new iPhone and sign in to iCloud.
  • Open the Apple Watch app on your new iPhone and pair your watch with your new iPhone.
  • Try restoring from a backup.
  • Follow the instructions on the screen to complete the setup.

How to unpair Apple Watch without a phone?

How to untie (unpair) Apple Watch without iPhone. method 2

To do this, go to the “Settings” application on the Apple Watch (the gear icon), go from there to the “General” section, select the “Reset” menu and click on the “Erase all content” item.

How to unlink watch from iPhone without iPhone?

To decouple the Apple Watch from the iPhone without the smartphone itself, you need to do the following:

  • Go to iCloud.com and log in with your Apple ID.
  • In the Settings section, find the clock and click on it.
  • In the menu that opens, click the cross next to the clock and confirm the removal of the device.

What to do if Apple Watch can’t see iPhone

If there is no connection between gadgets, Apple has provided several ways to solve this problem.

Reconnecting

First of all, the user is advised to reconnect Apple Watch to the iPhone. For this attempt to be successful, you need to make sure that the gadgets are close to each other, the smartphone is connected to Wi-Fi and Bluetooth is activated, and the “Air mode” on the phone is turned off.

After that, you need to check your watch and make sure that “Air Mode” is turned off, just like on the iPhone. Then both devices should be rebooted. If after that it is not possible to synchronize the devices, you need to use the second method.

What iPhone Apple Watch works with

Any Apple Watch model, even the oldest user can only connect to iPhone version 5s and higher.

IOS operating system is a prerequisite for the watch to work.

It must be updated to the latest version.

3 Apple Watch model that supports cellular networks and uses GPS will only work with iPhone 6 or higher.

GPS-only watch model 3 will be compatible with iPhone 5s or higher.

How to connect Apple Watch to Iphone

Smart watches are very popular among Apple technology owners. Therefore, any user purchasing this gadget is interested in which iPhone will be better combined with a smartwatch and how to pair with an Apple Watch.

How to check the connection

It is possible to check the connection using the watch or on the smartphone screen.

In the first case, you need to open the Control Center category on the Apple Watch display. To do this, you need to swipe the screen from top to bottom.

If the connection is established, the smartphone icon will appear in the upper left corner of the screen, which will be green.

In the event that the user sees a crossed-out phone or a red cross at this place, the connection between the devices has not been established.

To check the availability of a connection between devices using a smartphone, you need to open the “Watch” tab, which will contain all the information about the connection.

Step-by-step instructions for connecting Apple Watch to iPhone

There are 2 ways that you can connect Apple Watch to iPhone. The first one is automatic. This is the fastest and easiest way to connect gadgets.

To automatically synchronize devices, the user needs to do the following:

  • Press the side button of the watch and hold it for 2 seconds, thereby turning on the gadget.
  • Place the watch close to the smartphone.
  • The phone screen will read: “Use your iPhone to set up this Apple Watch.” The user should click on the “Continue” button.
  • The system will require you to bring the gadget to the smartphone camera and place them within the field for scanning.
  • Then the owner should choose the hand on which the watch will be located.
  • The system will require you to enter your username and password from Apple ID.
  • The user needs to know all the geolocation information about Honor and click “OK”.
  • Then you should come up with a password and enter it.
  • The iPhone will receive a pairing notification, which means that everything is ready.

The second way to sync devices is manually. This method is suitable for those owners who have various problems with the phone. To use it, follow the instructions below:

  • Place gadgets next to each other.
  • Connect iPhone to Wi-Fi.
  • On the smartphone screen, click on the “Watch” item.
  • Click on the category “Start pairing”.
  • Activate the “Manual installation” mode, which is located at the bottom of the screen.
  • Click on the symbol “i”.

After that, the smartphone will see the clock, and the user just needs to follow all the instructions of the program.

Breaking and re-creating a bond

To use this method, the user needs to do the following:

  • select the “Settings” category in the “Apple Watch” settings;
  • click on the “Basic” button;
  • select the “Reset” item;
  • click on the category “Erase content and settings”;
  • on the iPhone, select the item “My Watch”;
  • click on the symbol “i”;
  • click on the Unpair Apple Watch category;
  • confirm this action;
  • bind the gadget to the iPhone again.

Preparing Apple Watch and iPhone for syncing

To synchronize devices quickly, without giving the user a lot of trouble, the owner of the gadgets should prepare the watch and iPhone for the upcoming procedure. To do this, you need to follow a series of simple steps:

  • update the operating system of the mobile phone to the latest version;
  • click on the “Settings” section;
  • select the “Bluetooth” item;
  • change the position of the slider to active;
  • connect iPhone to Wi-Fi network.

After these simple steps, preparation for synchronization will be completed.

How to reset Apple watch?

How to reset and delete data from Apple Watch

  • Open the Apple Watch app and select the “My Watch” tab;
  • Select “General”. “Reset”;
  • Click on the option “Erase Apple Watch content and settings”, confirm the action. Enter your Apple ID password if prompted.

How to unlink watch from iPhone?

How to unlink watch from iPhone

  • Launch the Watch app on iPhone.
  • Go to My Watch and select a device.
  • Click the info button next to the clock.
  • Tap Unpair Apple Watch and confirm.

How to break a pair between an iPhone and a watch?

Apple Watch: unpair and wipe data

  • Keep your Apple Watch and iPhone in close proximity when unpairing.
  • Open the Apple Watch app on iPhone.
  • Go to the My Watch tab and select your watch at the top of the screen.
  • Click the info button.
  • Select Unpair Apple Watch.

How to pair and unpair an Apple Watch and iPhone

Is it possible to connect one watch to two phones?

You cannot connect the watch to multiple phones at the same time. To establish a connection with another phone, you must first reset your watch. After that, you will be able to connect the watch to the new device.

How to pair Apple Watch with Android?

Instructions for connecting Apple watch to Android

  • Using the Google Play service, install the Aerlink: Wear Connect for iOS program on your smartphone.
  • Install the free BLE Utility application on the Apple Watch through the App Store service.
  • Launch the Aerlink: Wear Connect for iOS app and activate the iOS Service in it.

Is it possible to untie Apple Watch without a phone?

To decouple the Apple Watch from the iPhone without the smartphone itself, you need to do the following:

  • Go to iCloud.com and log in with your Apple ID.
  • In the Settings section, find the clock and click on it.
  • In the menu that opens, click the cross next to the clock and confirm the removal of the device.

Can I use Apple Watch without my phone?

If the watch is connected to a Wi-Fi or cellular network

When iPhone is turned off or out of range, Apple Watch can receive or receive data over Wi-Fi. If your watch is cellular, you can connect it to a cellular network.

Is it possible to connect 2 phones to Apple Watch?

Pairing multiple Apple Watch

You can also do the following: Open the Apple Watch app on iPhone. Tap My Watch, then select Apple Watch at the top of the screen. Tap Pair with Another Watch, then follow the onscreen instructions.

Preparing Apple Watch to connect to a new iPhone

In iOS, to connect Apple Watch to a new gadget, you need to save all your personal data using a simple and functional backup system in iTunes. First, we break a pair between the old iPhone and the Smartwatch.

In the course of this process, information from the Apple Watch will be backed up to the device’s memory. To do this, follow the steps:

These actions are performed quickly, it will take less than a minute. After breaking the pair, the clock is cleared of all content. a full reset is performed. All content from Apple Watch will be preserved on iPhone.

How to connect Apple Watch to a new iPhone. transfer settings

Now we will figure out how to connect your Apple Watch to an iPhone for the first time or if you have changed your iPhone to another. We will analyze all the nuances and connection options.

This article is suitable for all iPhone 11 / XS (r) / X / 8/7/6 and Plus models on iOS 13. Older versions may have different or missing menu items and hardware support specified in the article.

  • Preparing Apple Watch to connect to a new iPhone
  • Saving an iPhone backup
  • Recovering data on a new iPhone and connecting Apple Watch
  • If you don’t have an old iPhone or have all data erased from it
  • IPhone doesn’t prompt to use Apple Watch during setup

Recovering data on a new iPhone and connecting Apple Watch

We have a local copy, now we need to connect the new iPhone to the Mac to transfer the information. After connecting the gadget to iTunes, you will be prompted to restore it from the latest backup, which we do.

When the process is complete, Apple Watch can be connected. Instructions:

You can use any password, but you need to add encryption, since the data will not be saved in the copy from the Apple Watch. all information from the Activity and Health applications will disappear.

IPhone doesn’t prompt to use Apple Watch during setup

If you encounter this problem, then break the pair between the old iPhone and the Smartwatch. Then you need to pair with a new iPhone.
When a prompt is displayed, you should restore your Smartwatch from a backup. Check that your gadgets are up to date, otherwise the backup may not appear in the list of available ones.

Saving an iPhone backup

If you choose to back up information to iCloud, then there are no nuances here:

  • Go to “Settings”, select “iCloud” and “Backup”.
  • Force updating the current copy.

You can also create a local backup copy of the data on the Mac, because you can recover from it many times faster than using a cloud server. Instructions:

  • Launch iTunes.
  • Connect iPhone.
  • Go to the “Overview” menu.

There is a rather important nuance here. The backup must be encrypted.

You can use any password, but you need to add encryption, since the data will not be saved in the copy from the Apple Watch. all information from the Activity and Health applications will disappear.

How to delete unneeded iPhone backups from iTunes

How to connect Apple Watch to new iPhone transfer settings

Now we will figure out how to connect your Apple Watch to an iPhone for the first time or if you have changed your iPhone to another. We will analyze all the nuances and connection options.

This article is suitable for all models of iPhone XS / XR / X / 8/7/6/5 and Plus on iOS 12. On older versions, the menu items and hardware support indicated in the article may differ or be missing.

  • Preparing Apple Watch to connect to a new iPhone
  • Saving an iPhone backup
  • Recovering data on a new iPhone and connecting Apple Watch
  • If you don’t have an old iPhone or have all data erased from it
  • IPhone doesn’t prompt to use Apple Watch during setup

Preparing Apple Watch to connect to a new iPhone

In iOS, to connect Apple Watch to a new gadget, you need to save all your personal data using a simple and functional backup system in iTunes. First, we break a pair between the old iPhone and the Smartwatch.

In the course of this process, information from the Apple Watch will be backed up to the device’s memory. To do this, follow the steps:

  • Opening the Watch app on the iPhone.
  • Then select “Apple Watch” and “Unpair Apple Watch”. We confirm our decision.
  • You may also be prompted to enter your Apple ID.
connect, apple, watch, iphone

These actions are performed quickly, it will take less than a minute. After breaking the pair, the clock is cleared of all content. a full reset is performed. All content from Apple Watch will be preserved on iPhone.

If you don’t have an old iPhone or have all data erased from it

In this situation, the Smart-watch can still be paired with the old device. To break a couple, we perform the following actions:

  • Erasing information from Apple Watch.
  • Setting up a new iPhone, signing in to iCloud. If the device is already configured and logged in, then skip this step.
  • We open the Apple Watch program on a new device and create a pair between the watch and the new gadget.
  • Try to restore from a backup. Make sure your gadgets are up to date, otherwise the backup may not appear in the list. In iOS 11 and later versions of the system, the “Activity” and “Health” information in iCloud is automatically synchronized with all devices where the account is signed in with the same Apple ID identifier. If there is no backup copy, then the Smart watch is set up as new.
  • Follow the onscreen instructions to complete the setup.
  • We start using Apple Watch with the new iPhone. It may take a few days for all of your data to be displayed in iCloud.

Recovering data on a new iPhone and connecting Apple Watch

We have a local copy, now we need to connect the new iPhone to the Mac to transfer the information. After connecting the gadget to iTunes, you will be prompted to restore it from the latest backup, which we do.

When the process is complete, Apple Watch can be connected. Instructions:

    Launch the Watch application on the iPhone. In Apple Watch, select the desired language. Then we follow the prompts displayed on the screen.

In this step, select the “Restore from backup” section. We indicate the most current version of the copy and wait for the process to complete.

Now Smart-watch is tied to the new iPhone, all information is restored.

IPhone doesn’t prompt to use Apple Watch during setup

If you encounter this problem, then break the pair between the old iPhone and the Smartwatch. Then you need to pair with a new iPhone.
When a prompt is displayed, you should restore your Smartwatch from a backup. Check that your gadgets are up to date, otherwise the backup may not appear in the list of available ones.

How to connect Apple Watch to new iPhone # 8212, transferring settings5

How to connect iPhone, iPad or iPod Touch to Apple TV

Apple TV allows you to display a picture from any iDevice on the TV screen. The main condition is that the set-top box and the iOS device must be connected to the same Wi-Fi network. To do this, just go to Control Center (swipe up from the bottom of the screen), select “Screen Repeat” and specify Apple TV in the list of devices that appears. Naturally, the set-top box must be turned on and connected to Wi-Fi.

After that, the TV display will display everything that happens on the iPhone or iPad screen. games, movies, music, etc. In addition, integration with Apple TV can be activated in some applications, for example, YouTube.

How to connect iPhone, iPad or Mac to Apple TV (TV)

One of the main reasons that can induce a user to buy an Apple TV set-top box is the ability to quickly connect an iPhone, iPad or Mac (MacBook, iMac, etc.) to the TV. What is it for? Of course, in order to display photos, videos, music, applications, games and other content from the aforementioned devices on a large TV screen.

In this material, we will not touch on the process of connecting the Apple TV set-top box itself to the TV and its initial setup. this is described in detail in this material.

How to connect a laptop or computer to Apple TV

Similar to iOS devices, you can connect a computer or laptop to Apple TV. In this case, Windows-PC owners will be forced to use special utilities, while Mac users will find the familiar AirPlay icon in the top menu bar, clicking on which will allow you to broadcast the image and sound from the Mac to the TV.

On macOS up to and including Catalina:

On macOS since Big Sur:

This is quite handy for playing content from the Music app on macOS,

watching videos from YouTube, photo albums, etc.

Can I help you

Follow the steps below for your question.

Refresh your old iPhone

Before you turn on your Apple Watch on your new iPhone, update your old iPhone and update your Apple Watch. It can take from a few minutes to an hour for the update to complete. You might want to update overnight or wait until you have time and make sure both devices are charging.

If your iPhone doesn’t ask if you want to use your Apple Watch during setup

Disconnect the Apple Watch from your old iPhone and then sync it with your new iPhone. When asked to restore Apple Watch from a backup. Make sure your iPhone and Apple Watch is up to date, otherwise you may not see your backup listed.

If you have an old iPhone

Use these steps to back up your Apple Watch before pairing with your new iPhone.

If you have an old iPhone and won’t erase it

Disconnect your Apple Watch from your old iPhone. Then choose one of these options depending on when you created your new iPhone:

  • If you just restored your new iPhone from the latest backup, a couple of devices. Make sure your iPhone and Apple Watch is up to date, otherwise you may not see your backup listed. When you asked, restore from the watch backup. Your activity, workouts, or content, settings may be lost depending on how the old backup.
  • If your iPhone has been backing up several days or weeks old and you want to keep as much content as possible, erase your new iPhone. Then transfer content from your old iPhone to your new iPhone. You may lose some of the content on your new iPhone. Remember to sync your Apple Watch and over again to iPhone.

Set up your new iPhone

Customize your new iPhone. When asked if you have an iCloud or iTunes backup, select the latest backup to restore your data from your old device to your new device. Make sure your iPhone and Apple Watch is up to date, otherwise you may not see your backup listed.

If your iPhone asks if you want to use your Apple Watch, tap continue. If you haven’t asked, you can still set up your Apple Watch manually in the next step. Can I help you. if your iPhone doesn’t ask if you want to use your Apple Watch.

Open Apple Watch app on your iPhone

Keep your Apple Watch and iPhone next to each other. Open Apple Watch app on your iPhone.

If your iPhone asks you to confirm that you want to use your watch, follow the onscreen instructions to complete the setup.

If your iPhone asks you to start pairing, pairing your Apple Watch so you can set it up.

Once installed, you can start using your Apple Watch with your new iPhone.

Check your health and performance parameters

If you’re backing up using iCloud, go to [your name] iCloud Settings and make sure your health is on.

If you back up using iTunes, encrypt the backup. to keep your health and content active.

Table of Contents