How to Connect a Screen to a Computer

Watching videos or images from smartphones is more convenient on large monitors. Making it simple is enough to stream content from the gadget to the display. Below, we will consider methods for how to display the phone screen on a computer via USB. There are several options for demonstrating the contents of the device.

Smartphone preparation

There are several ways to transfer the screen from your phone to Android OS. But before that you need to prepare the device.

  1. Go to settings and select the “About phone” section.
    How to Connect a Screen to a Computer
  2. Click 7 times on the version of the assembly or firmware until a notification about entering the developer mode appears.
  3. In the accessibility section, select an item for developers.
  4. Enable “USB Debugging” by checking the box next to the corresponding item.
  5. Finally, reload the gadget.

To display the smartphone screen, you must use a special utility that is installed in the computer’s browser.

Browser output

To control an Android phone from a computer when the screen is broken, a browser is often used. It replaces the need to download third-party applications and makes it possible to start broadcasting videos as simply as possible.

Next you need to configure your browser

After that, the program will be able to independently transfer the gadget’s screen to the monitor and give access to it. It is noteworthy that you can display an image, control the display and carry out other functions.

Using apps

If you need to synchronize the phone screen with a computer, you can use one of the programs offered by the developers. There are a lot of them on the Internet, each of them has its own method of work and connection.

Apowersoft phone manager

This tool is suitable for those who have broken the phone screen and do not know how to connect their gadget to the computer. It not only transfers data, but also restores content, manages files and much more.

The program displays the display of smartphones on Android, iOS. It makes it possible to take screenshots and record videos with sound.

How to watch a smartphone screen

  1. Download the program and install it.
  2. Connect the phone via usb and open the application.
  3. In the left panel, you will see the smartphone screen in real time.

Using this utility, screen management will be easy and simple. You can stretch it to the entire diagonal, do more or less.

Screen Droid @ Screen

The program helps to manage a phone with a broken screen from a computer. The tool is easy to use, can be freely downloaded. But, along with this, you need to try to use it correctly.

  1. Download the Android SDK Tool to your computer.
  2. Install the Droid @ app.
  3. Install the latest version of Java.
  4. Launch the Droid @ screen.
  5. Next, write the adb.Exe address on the computer command line: C: \ Users \ Your account name \ AppData \ Local \ Android \ android-sdk / platform-tools \ adb.Exe. Press enter.
  6. Connect the smartphone to the computer using the cord.

To display and control the phone screen, you will have to run two different utilities. Also, a problem may arise when entering the address in the search bar, as it will be difficult for non-technical users to do this.

The application is a kind of mirror and does not provide any more functions other than connecting and displaying the screen.


This is a universal application for displaying a phone screen on a computer. It does not require additional knowledge to work and is quickly installed.

  1. Download the program to your computer and open the utility.
  2. Select a connection type.
  3. After connecting in the settings, select the option to display a screenshot.

With this program you can control your smartphone and even display the keyboard. Another of its features is the use of the mouse cursor. But how effective this function is for you to decide.

Output from a device on a Windows Phone

For smartphones on Windows Phone 8.1, displaying a picture is somewhat easier. If you are using a computer with Windows 7 or later, do the following:

  1. On the computer, install the official “Screen Projector” program.
  2. Connect your phone using USB.
  3. Confirm the permission of the application to work with the smartphone.

After that, you can connect the screen to view its contents.


To transfer the smartphone screen to the computer, special applications or plug-ins are used in the browser. Utilities help you quickly set up content translation and management.

To create copies of documents, photographs and any notes on paper, a scanner is required. With its help, the contents of paper media are analyzed, and their digital image is reproduced with the file saved on the computer. To install the equipment, you must not only correctly connect the device to the computer, but also configure it to work. Equipment is necessary for the full work of most organizations, and more and more people are purchasing the device for personal use.

Connecting the scanner to a computer

For high-quality operation of the device, you need to correctly connect and install drivers. Modern equipment is equipped with everything necessary for an ordinary person to cope with this without specific skills and knowledge.

Video: How to Connect a Screen to a Computer

First, prepare a convenient place near the computer for the device. For future convenience and comfort in work, it is necessary to take into account the dimensions of the device, the length of the connecting wire. After the scanner is located in its place, you can start the connection.

What is required for this

After studying the instruction manual of the device, you must prepare all the necessary cables, make sure that they do not have external mechanical damage. Connecting wires should not be tensioned when connected, as this increases the likelihood of a broken connection. The equipment itself must also be inspected for damage or cracks. Usually a scanner with the necessary drivers and software is included with the scanner. The disk does not need to be removed far, with its help it will be easier to install files through the drive. Modern computer models are not all equipped with drives, therefore, for such equipment disks will not be needed. For such cases, drivers can be downloaded from special sites. It is advisable to take advantage of the offer to download and install drivers from the site of the scanner manufacturer.

What problems may arise

It may happen that the connection was carried out according to the rules, but the scanner still does not work. The causes of the problem can be many. One possible reason may be that drivers are not installed. The scanner may not work if the cables are poorly and loose to the computer, or the control lever is simply not turned on. Scanning may not occur or the image will be of very poor quality. In order to establish the true problem, consistent steps should be taken to check the equipment.

How to troubleshoot

First of all, you need to make sure that the equipment is connected to a power source and turned on. The fact that the device is connected to the power is indicated by an illuminating indicator, which is located in the lower part of the case. Then check if the cables are connected correctly. If one of them is poorly connected, this may be the cause of the problem. Many models of modern scanners are equipped with special levers that block the equipment during transportation. In the instruction manual, this fact should be indicated, so you should re-read it carefully again. Sometimes you can normalize the scanner by simply restarting your computer or laptop.

How to connect a scanner to a computer: step by step

  1. After studying the instructions, you can proceed to connect the device. First you need to disconnect the computer from the network.
  2. Connect the scanner cable to the appropriate port on a computer or laptop.
  3. Turn on the computer or laptop, wait until the equipment is fully loaded.
  4. The download field on the screen will display a system message stating that a new device has been detected.
  5. Insert the disk into the drive, and load the drivers. You can not use the disk, but download from a special site from an Internet resource.
  6. Use the installation wizard to install the software.
  7. Scan any document or image to verify the operation of the device.
  8. If you need to connect several computers to one scanner, you will have to use a network switch.

If you need to connect several computers to one scanner, you will have to use a network switch. Thus, you can connect any office equipment: printer, fax or telephone. Drivers must be installed on all types of hardware. Only in this case, uninterrupted operation of the equipment is possible. Otherwise, scanning or faxing documentation will not work correctly or will not function at all.

Depending on windows

After installing the device to a computer with the operating system Windows 8 or 8.1, a problem may arise that is completely solvable. A frame may appear on the computer monitor with the message “Cannot connect the scanner.” This system does not install default drivers without a digital signature. The system has only one boot mode. To solve this problem, the following sequential steps should be performed:

  • Go to the side menu, find the “Parameters” item.
  • The next item is “Changing computer settings”.
  • Enter the item “Update and recovery”, and then in “Recovery”.
  • To get to the boot options selection menu, you must restart the computer by holding down the “Shift” key.
  • In the menu that appears, select “Diagnostics”, then “Boot Parameters”.
  • A list of items will appear from which to select ”Connect mandatory verification of driver signatures”, restart the computer.
  • After the reboot, the “Boot Parameters” menu appears, select the item with number 7. This is done using the key with the same number.
  • Now you should restore the previously deleted software.
  • Perform a device operation check by printing any document.

After all the steps taken, the scanner will start working. In order for the equipment to run smoothly for a long time, you must carefully handle it. The scanner must not be dropped, knocked, installed in a room with high humidity or extreme dustiness. Subject to the basic rules, the device will last a long and high quality.

Apple AirPods wireless headset is one of the best-selling on the market, because these headphones are practical and comfortable compared to their counterparts. They produce the highest quality sound and work stably with devices from Apple, but they can also be connected to Android devices. Easy to connect your AirPods to your computer. They will work perfectly with a PC based on the Windows operating system, if it has a Bluetooth modem.

  1. What you need to connect AirPods to a PC
  2. Instructions for connecting AirPods to a computer or laptop on Windows 7, 8, 10
  3. Disadvantages of connecting to a PC
  4. What other devices can I connect AirPods to
  5. What to do if a problem occurs

What you need to connect AirPods to a PC

  1. Bluetooth tethering
  2. Necessary drivers on your device.
  3. Your PC or laptop must support a wireless headset connection.

Instructions for connecting AirPods to a computer or laptop on Windows 7, 8, 10

  1. Turn on the Bluetooth function on our device.
  2. We pair the headphones with the device.
  3. On the case (and charger at the same time), press the button and hold it for a couple of seconds.
  4. Wait for the indicator to light up near the button on the charging box. This blinking indicates that the headphones and the PC / laptop have completed the process of identifying each other.
  5. All that’s left is the standard procedure for connecting a regular wireless headset to your device.

Disadvantages of connecting to a PC

In principle, we figured out how to connect AirPods to Windows 7, 8, 10, but in the process some troubles may arise. After all, when AirPods are connected to devices that are not owned by Apple, they get limited functionality. The user will not be able to:

  • View the charging status of the headphones on the device screen;
  • Take advantage of the function of quickly switching headphones between different devices.

If you connect AirPods to Apple and Android devices, you can use the touch panel functionality, but in the case of a PC or laptop, the touch panel will not work. But despite this, the headphones in any case will work stably, and the sound quality will be on top.

What other devices can I connect AirPods to

Also, in addition to devices on Windows, you can connect your Apple wireless headphones to any other device that has a Bluetooth function. Be it a tablet, iWatch, PDA, Android phone or other OS.

What to do if a problem occurs

Although Apple promises us the stable operation of AirPods even when pairing them with other devices, various problems may occur. In order to get rid of these problems, you need to restart your headphones. The reboot algorithm for this model of headphones:

  • You need to hold down the button on the charging case for a certain time until the amber color indicator flashes;
  • After the indicator is on, close the cover of the charging box;
  • After that, just re-pair.

Now you know how to connect your Apple AirPods to a laptop or PC and use them to the maximum.