Article

How To Connect A New Tv To Digital Television

Switching to digital television: without a prefix, is it possible to watch what to do when analog TV is turned off. Last news

As previously reported many times, starting in January 2019, the Russian Federation will completely abandon analog television. For residents of Russia will be available 20 free digital TV channels, as well as three radio channels.

  • When to turn off analog television
  • Is it possible to watch digital television without a special set-top box
  • What to do in order to connect a digital signal to a TV

WHEN DISABLED ANALOGUE TV

Eduard Sagalaev, who is president of the National Association of Broadcasters, told reporters exactly how and when analogue television will be turned off and the transition to digital television will be made.

According to him, in January, analogue television viewers do not need to worry about the fact that suddenly their screens go out and stop broadcasting television programs if digital television is still not connected.

Experts say that the transition to digital television will be carried out in several stages, and while this transition will be carried out, analog television will not be turned off. For the slow-moving residents of the Russian Federation, the specialist explains that the letter “A” on the TV screen means that the broadcasting is carried out using the old TV, or the transition to the digital format has not yet been made.

Thus, special services inform Russians that they need to switch to a digital signal. The expert also said that for people, especially those who live in villages and do not have the opportunity to use Internet resources, and also are not up to date with all the events and news, this designation of an analog signal is a pretty good guide.

In addition, every day, many advertisements, as well as special broadcasts and informational messages, indicate that analog television will soon disappear and it is necessary to switch to a digital signal. The expert also said that the Russian population was accustomed to do everything at the last moment, but he warned that after the New Year analogue television would function normally, so that Russian citizens during the New Year holidays would not be disconnected from the outside television world, even if they did not switch to digital signal.

Previously, it was planned that the transition to a new digital format will occur immediately during the New Year at 00.00 hours. But then, after consulting with many experts and having a special conference, the experts decided to give people in the Russian Federation the opportunity to see New Year’s programs using an analog signal on TVs.

CAN YOU WATCH WITHOUT SPECIAL SETTINGS DIGITAL TELEVISION

Some televisions, especially those of a new type, have special set-top boxes built into their system that are capable of receiving a digital signal. In order to find out if the TV has the ability to receive a DVB-T2 signal, you need to look at such possibilities in the TV manual.

As mentioned earlier, in the new TV models such formats are supported without a problem and no additional equipment is needed in order for the TV to accept digital format.

WHAT TO DO TO CONNECT THE DIGITAL SIGNAL TO THE TV

As mentioned earlier, you need a special antenna, and a tuner. Experts say that a special package of the 20 most popular channels will be available to Russian viewers, which will be free.

It is also reported that in the future it is planned to launch two more packages, but according to many experts, as well as representatives from the leadership of the association of broadcasters, the following packages will already be paid.

Experts also note that the digital signal is of better quality, thus, Russian viewers will have free 20 of the most popular channels in perfect sound and picture quality.

Digital TV without prefix

Soon, the government of our country promises a total translation of the format of television broadcasting from analog to digital. In order not to remain without television broadcasting and not watch the laconic message “no signal” on the TV screen around the clock, you will have to do some simple preparatory work.

How to connect digital TV without a set-top box

To begin with, let’s figure out what are the prerequisites for watching digital television broadcasts on a home TV. In the absence of a collective antenna, there are only two of them:

  • the presence of a digital TV tuner with support for the DVB-T2 standard;
  • the presence of a television reception antenna operating in the decimeter range. It is possible to use a universal all-wave antenna.

If you used a “Polish” antenna to receive analog channels, and you don’t have a special desire to change it, then it is advisable to replace the antenna amplifier that comes with it with a balancer. This device cuts off the unnecessary frequency range of reception and more clearly tunes the antenna to the desired frequency grid. In principle, there are antennas of this type on sale that are already equipped with a symmetrizator, so that the old antenna can be easily replaced.

Before you start acquiring a television antenna and, if necessary, a TV tuner (receiver) or a modern TV with an integrated digital receiver, you need to make sure that the reception of digital channels in the region of your residence is possible in principle.

If it turns out that modern innovations have not yet touched your region, it is worth considering other options. For example, connecting to cable television, purchasing the necessary kit for satellite reception of digital channels, or setting up IPTV (Internet TV in IP format).

If you have a confident reception, people who own television sets purchased before 2004 will have two options: change the TV or buy a DVB-T2 set-top box. Usually the second option is used more often, since it is much cheaper.

The set-top box is connected to the TV with the cable that comes with it, through the usual “AV” connector or the HDMI input.

Digital TV DVB-T2 without set-top box

So, we found out that watching digital television without a set-top box is possible only with the built-in digital DVB-T2 module. If this condition is met, then in addition to the UHF antenna (in the absence of a collective one), you will not need anything else.

Before connecting the antenna, it is advisable to turn off the TV. After the cable is connected, turn on the TV, activate the DVB-T2 tuner, go to its settings menu, indicate the broadcast country (Russia) and turn on “auto search”. After a few minutes, all available digital channels will appear on your device.

DVB-C Digital TV without Set-top Box

If you are a subscriber of any cable network, then when your provider switches to digital format, the only condition for watching digital channels will be a TV with support for DVB-C, MPEG-2 or MPEG 4 standards. If there is such a tuner in your television If the receiver is missing, then viewing the broadcasts of your operator can only be done using the console.

Televisions released over the past five years are usually equipped with everything necessary for cable connection. Many devices even have a CAM card receiver. If your TV belongs to this class, then you will not have to do anything new to configure it and connect it. You just need to connect the cable to the TV connector, activate the cable DVB-C tuner and enable automatic channel search. In a word, repeat almost the same procedure as when setting up digital terrestrial television.

Some providers use IP or mixed DVBIP format for signal transmission. In this case, it all depends on the class of your television receiver. If it supports the IPTV standard, there will be no problems. Otherwise, the company will offer you an external receiver to coordinate the broadcast format with the capabilities of your TV.

Similar problems arise with cable operators, who practice using CAM modules to settle accounts with customers. In this case, even if you have the appropriate built-in digital tuner, you will not be able to freely watch television channels, since they are encoded.

If your TV does not have a device for receiving such cards, you will have to purchase it from your provider, or buy a PCMCIA card reader yourself and connect it to the device through a special PCMCIA slot or USB connector, depending on the model. Another option is to purchase a receiver equipped with such a card reader. In a word, if you have problems connecting, call a specialist company that provides you these services and consult with him.

Iptv without prefix

There are various ways to connect IPTV to your TV:

  • using an external set-top box;
  • wirelessly using a WIFI router;
  • by installing IPTV applications;
  • through the installed browser.
How To Connect A New Tv To Digital Television

Since we are only interested in the wireless connection method, we will consider it using some modern TVs of famous brands as an example.

LG TVs connect to Internet TV through the company’s IP IP SS application. To install this program, in the “Menu” section of the device, you need to select the type of connection (via the next), then through the “Smart” tab, enter “Smart World”. Through the address line, enter “SS IPTV” and turn on the search. The installed application should appear in the list of programs, after which we install and open the application. Everything, the connection is established, it remains to load only the playlist of your provider.

Owners of Philips TVs need to follow a similar procedure. After establishing a connection (WI-FI), on the remote control of the device by pressing the “Home” button, open the “configuration menu”. Then through the option “Network Settings” we enter the subsection “Operating Mode” and prescribe “DNS” in it. In order to connect IPTV, just install any available widget.

If you have a different TV model, instructions for connecting to IPTV can be found on the Internet or on the official websites of the companies that manufacture these devices.

Non-prefix digital TV via Smart TV

If your television receiver supports the Smart TV function, then no additional technical means will be needed to connect it to the Internet television. Let’s take LG as an example, consider the scheme of its connection to any operator providing similar services. Take, for example, PeersTV. The whole connection procedure is reduced to installing the necessary application, which will open for you a list of channels offered for viewing.

So, using the “SMART” button, open the portal and enter the “Search” line. A pop-up keyboard will give you the opportunity to enter the name of the application, and then activate the search. A window opens with a list of found programs, among which you must select the one that interests you. We hover over the “PeersTV” label and click the “OK” button to install the application. Then, using the “MY APPS” button, open the list of installed programs, select the desired one and press the “OK” button again. Everything, the application is installed, and you can enjoy viewing.

Digital TV without prefix

Soon, the government of our country promises a total translation of the format of television broadcasting from analog to digital. In order not to remain without television broadcasting and not watch the laconic message “no signal” on the TV screen around the clock, you will have to do some simple preparatory work.

How to connect digital TV without a set-top box

To begin with, let’s figure out what are the prerequisites for watching digital television broadcasts on a home TV. In the absence of a collective antenna, there are only two of them:

  • the presence of a digital TV tuner with support for the DVB-T2 standard;
  • the presence of a television reception antenna operating in the decimeter range. It is possible to use a universal all-wave antenna.

If you used a “Polish” antenna to receive analog channels, and you don’t have a special desire to change it, then it is advisable to replace the antenna amplifier that comes with it with a balancer. This device cuts off the unnecessary frequency range of reception and more clearly tunes the antenna to the desired frequency grid. In principle, there are antennas of this type on sale that are already equipped with a symmetrizator, so that the old antenna can be easily replaced.

Before you start acquiring a television antenna and, if necessary, a TV tuner (receiver) or a modern TV with an integrated digital receiver, you need to make sure that the reception of digital channels in the region of your residence is possible in principle.

If it turns out that modern innovations have not yet touched your region, it is worth considering other options. For example, connecting to cable television, purchasing the necessary kit for satellite reception of digital channels, or setting up IPTV (Internet TV in IP format).

If you have a confident reception, people who own television sets purchased before 2004 will have two options: change the TV or buy a DVB-T2 set-top box. Usually the second option is used more often, since it is much cheaper.

The set-top box is connected to the TV with the cable that comes with it, through the usual “AV” connector or the HDMI input.

Digital TV DVB-T2 without set-top box

So, we found out that watching digital television without a set-top box is possible only with the built-in digital DVB-T2 module. If this condition is met, then in addition to the UHF antenna (in the absence of a collective one), you will not need anything else.

Before connecting the antenna, it is advisable to turn off the TV. After the cable is connected, turn on the TV, activate the DVB-T2 tuner, go to its settings menu, indicate the broadcast country (Russia) and turn on “auto search”. After a few minutes, all available digital channels will appear on your device.

DVB-C Digital TV without Set-top Box

If you are a subscriber of any cable network, then when your provider switches to digital format, the only condition for watching digital channels will be a TV with support for DVB-C, MPEG-2 or MPEG 4 standards. If there is such a tuner in your television If the receiver is missing, then viewing the broadcasts of your operator can only be done using the console.

Televisions released over the past five years are usually equipped with everything necessary for cable connection. Many devices even have a CAM card receiver. If your TV belongs to this class, then you will not have to do anything new to configure it and connect it. You just need to connect the cable to the TV connector, activate the cable DVB-C tuner and enable automatic channel search. In a word, repeat almost the same procedure as when setting up digital terrestrial television.

Some providers use IP or mixed DVBIP format for signal transmission. In this case, it all depends on the class of your television receiver. If it supports the IPTV standard, there will be no problems. Otherwise, the company will offer you an external receiver to coordinate the broadcast format with the capabilities of your TV.

Similar problems arise with cable operators, who practice using CAM modules to settle accounts with customers. In this case, even if you have the appropriate built-in digital tuner, you will not be able to freely watch television channels, since they are encoded.

If your TV does not have a device for receiving such cards, you will have to purchase it from your provider, or buy a PCMCIA card reader yourself and connect it to the device through a special PCMCIA slot or USB connector, depending on the model. Another option is to purchase a receiver equipped with such a card reader. In a word, if you have problems connecting, call a specialist company that provides you these services and consult with him.

Iptv without prefix

There are various ways to connect IPTV to your TV:

  • using an external set-top box;
  • wirelessly using a WIFI router;
  • by installing IPTV applications;
  • through the installed browser.

Since we are only interested in the wireless connection method, we will consider it using some modern TVs of famous brands as an example.

LG TVs connect to Internet TV through the company’s IP IP SS application. To install this program, in the “Menu” section of the device, you need to select the type of connection (via the next), then through the “Smart” tab, enter “Smart World”. Through the address line, enter “SS IPTV” and turn on the search. The installed application should appear in the list of programs, after which we install and open the application. Everything, the connection is established, it remains to load only the playlist of your provider.

Owners of Philips TVs need to follow a similar procedure. After establishing a connection (WI-FI), on the remote control of the device by pressing the “Home” button, open the “configuration menu”. Then through the option “Network Settings” we enter the subsection “Operating Mode” and prescribe “DNS” in it. In order to connect IPTV, just install any available widget.

If you have a different TV model, instructions for connecting to IPTV can be found on the Internet or on the official websites of the companies that manufacture these devices.

Non-prefix digital TV via Smart TV

If your television receiver supports the Smart TV function, then no additional technical means will be needed to connect it to the Internet television. Let’s take LG as an example, consider the scheme of its connection to any operator providing similar services. Take, for example, PeersTV. The whole connection procedure is reduced to installing the necessary application, which will open for you a list of channels offered for viewing.

So, using the “SMART” button, open the portal and enter the “Search” line. A pop-up keyboard will give you the opportunity to enter the name of the application, and then activate the search. A window opens with a list of found programs, among which you must select the one that interests you. We hover over the “PeersTV” label and click the “OK” button to install the application. Then, using the “MY APPS” button, open the list of installed programs, select the desired one and press the “OK” button again. Everything, the application is installed, and you can enjoy viewing.

Digital TV without prefix

Soon, the government of our country promises a total translation of the format of television broadcasting from analog to digital. In order not to remain without television broadcasting and not watch the laconic message “no signal” on the TV screen around the clock, you will have to do some simple preparatory work.

How to connect digital TV without a set-top box

To begin with, let’s figure out what are the prerequisites for watching digital television broadcasts on a home TV. In the absence of a collective antenna, there are only two of them:

  • the presence of a digital TV tuner with support for the DVB-T2 standard;
  • the presence of a television reception antenna operating in the decimeter range. It is possible to use a universal all-wave antenna.

If you used a “Polish” antenna to receive analog channels, and you don’t have a special desire to change it, then it is advisable to replace the antenna amplifier that comes with it with a balancer. This device cuts off the unnecessary frequency range of reception and more clearly tunes the antenna to the desired frequency grid. In principle, there are antennas of this type on sale that are already equipped with a symmetrizator, so that the old antenna can be easily replaced.

Before you start acquiring a television antenna and, if necessary, a TV tuner (receiver) or a modern TV with an integrated digital receiver, you need to make sure that the reception of digital channels in the region of your residence is possible in principle.

If it turns out that modern innovations have not yet touched your region, it is worth considering other options. For example, connecting to cable television, purchasing the necessary kit for satellite reception of digital channels, or setting up IPTV (Internet TV in IP format).

If you have a confident reception, people who own television sets purchased before 2004 will have two options: change the TV or buy a DVB-T2 set-top box. Usually the second option is used more often, since it is much cheaper.

The set-top box is connected to the TV with the cable that comes with it, through the usual “AV” connector or the HDMI input.

Digital TV DVB-T2 without set-top box

So, we found out that watching digital television without a set-top box is possible only with the built-in digital DVB-T2 module. If this condition is met, then in addition to the UHF antenna (in the absence of a collective one), you will not need anything else.

Before connecting the antenna, it is advisable to turn off the TV. After the cable is connected, turn on the TV, activate the DVB-T2 tuner, go to its settings menu, indicate the broadcast country (Russia) and turn on “auto search”. After a few minutes, all available digital channels will appear on your device.

DVB-C Digital TV without Set-top Box

If you are a subscriber of any cable network, then when your provider switches to digital format, the only condition for watching digital channels will be a TV with support for DVB-C, MPEG-2 or MPEG 4 standards. If there is such a tuner in your television If the receiver is missing, then viewing the broadcasts of your operator can only be done using the console.

Televisions released over the past five years are usually equipped with everything necessary for cable connection. Many devices even have a CAM card receiver. If your TV belongs to this class, then you will not have to do anything new to configure it and connect it. You just need to connect the cable to the TV connector, activate the cable DVB-C tuner and enable automatic channel search. In a word, repeat almost the same procedure as when setting up digital terrestrial television.

Some providers use IP or mixed DVBIP format for signal transmission. In this case, it all depends on the class of your television receiver. If it supports the IPTV standard, there will be no problems. Otherwise, the company will offer you an external receiver to coordinate the broadcast format with the capabilities of your TV.

Similar problems arise with cable operators, who practice using CAM modules to settle accounts with customers. In this case, even if you have the appropriate built-in digital tuner, you will not be able to freely watch television channels, since they are encoded.

If your TV does not have a device for receiving such cards, you will have to purchase it from your provider, or buy a PCMCIA card reader yourself and connect it to the device through a special PCMCIA slot or USB connector, depending on the model. Another option is to purchase a receiver equipped with such a card reader. In a word, if you have problems connecting, call a specialist company that provides you these services and consult with him.

Iptv without prefix

There are various ways to connect IPTV to your TV:

  • using an external set-top box;
  • wirelessly using a WIFI router;
  • by installing IPTV applications;
  • through the installed browser.

Since we are only interested in the wireless connection method, we will consider it using some modern TVs of famous brands as an example.

LG TVs connect to Internet TV through the company’s IP IP SS application. To install this program, in the “Menu” section of the device, you need to select the type of connection (via the next), then through the “Smart” tab, enter “Smart World”. Through the address line, enter “SS IPTV” and turn on the search. The installed application should appear in the list of programs, after which we install and open the application. Everything, the connection is established, it remains to load only the playlist of your provider.

Owners of Philips TVs need to follow a similar procedure. After establishing a connection (WI-FI), on the remote control of the device by pressing the “Home” button, open the “configuration menu”. Then through the option “Network Settings” we enter the subsection “Operating Mode” and prescribe “DNS” in it. In order to connect IPTV, just install any available widget.

If you have a different TV model, instructions for connecting to IPTV can be found on the Internet or on the official websites of the companies that manufacture these devices.

Non-prefix digital TV via Smart TV

If your television receiver supports the Smart TV function, then no additional technical means will be needed to connect it to the Internet television. Let’s take LG as an example, consider the scheme of its connection to any operator providing similar services. Take, for example, PeersTV. The whole connection procedure is reduced to installing the necessary application, which will open for you a list of channels offered for viewing.

So, using the “SMART” button, open the portal and enter the “Search” line. A pop-up keyboard will give you the opportunity to enter the name of the application, and then activate the search. A window opens with a list of found programs, among which you must select the one that interests you. We hover over the “PeersTV” label and click the “OK” button to install the application. Then, using the “MY APPS” button, open the list of installed programs, select the desired one and press the “OK” button again. Everything, the application is installed, and you can enjoy viewing.

TURBION.NET 2021