How To Connect A Digital Set-Top Box To An Old Tv

The whole world has long switched to digital television. Our country has begun the transition process from analog signal transmission relatively recently. Digital television has contributed to the emergence of digital channels broadcasting throughout the country. Televisions supporting digital broadcasting DVB. T 2 appeared on sale.

It is very convenient, just connect the television cable to the TV, while no other wires are needed. But, if the TV does not support digital broadcasting, here the digital set-top box comes to the rescue. Many, having acquired this device, do not know how to properly connect it to the TV. Therefore, it is necessary to fill this information gap.

Equipment required

In order to broadcast digital television in the apartment, the following equipment is required:

  • television;
  • receiver;
  • antenna or satellite dish.

The TV should be such that it has an input for the antenna, connectors for “tulips”, scart. an input with a input. Modern TVs have an hdmi connector, it is also suitable for connecting a receiver.

Before you purchase a set-top box, you must familiarize yourself with the list of companies that provide digital television broadcasting services. Can consult with specialists the chosen company, who will advise the necessary model of the receiver. Some companies hold promotions that allow you to purchase and install the device for free.

The set-top box itself is just an attribute that allows you to receive and tune channels for a specific TV broadcast in a completely new format and much better quality. So that they broadcast through the receiver, you should deal with the broadcast source. It could be:

  • the Internet;
  • satellite dish;
  • other similar items.

However, do not puzzle too much on this issue, you just need to contact service providers, who will explain everything in detail and in an accessible way.

How to connect a digital set-top box

Connecting the console to the TV is as follows:

  • It is necessary to unpack the TV box and remove the protective film from it. This is done so that the film does not heat up during the operation of the console.
  • The cable is taken and the protective sheath is cut off from its ends, retreating by 10. 15 mm. The sheath must be cut so as not to accidentally damage the shiny film protecting the center conductor. Such a film is shielding.
  • Carefully unbend the film and screw on the f. Connectors.
  • Then connect the cable box to the TV.
  • After that, the tulip wires are connected to the console and the TV.
  • At the end, an antenna is connected to the TV. Install the antenna on the outside of the house or on the balcony. In this case, it is necessary to ensure that the antenna does not interfere with the wires of the power line or tree branches.

After that, it remains only to configure the digital receiver.

Setting up a digital set-top box

Set up a digital set-top box as follows:

  • you should take the console’s remote control and press the “Menu” button;
  • a window appears in which you need to select the “Configure channels”;
  • press “OK” and wait until the set-top box automatically tunes in the channels;
  • then you need to accept the discovered channels and save them.

Thus, setting up the receiver is quite simple.

Connecting a digital device to an old TV

Many still use old TVs. If the prefix attaches to modern models quickly and easily, then old “electrons” do not have a connector for “tulips”.

Some older televisions do not have an A / V input, but they do have a SCART connector, some of which accept component signals. Therefore, you can find the scheme of the adapter “tulips” on SCART and solder it yourself.

In addition, you can purchase an adapter from audio-to SCART. It is of two types: adapter cable and adapter itself, to which they connect a standard RCA cable from the console.

How To Connect A Digital Set-Top Box To An Old Tv

Old Soviet TVs of the “Electron” type are completely not equipped with any inputs, so you should use only the antenna jack, where a high-frequency modulated signal is supplied. Thus, it will be necessary to find a modulator with RCA inputs.


By connecting a digital television, do not forget to pay every month for a specific package of channels. Some providers offer the purchase of digital set-top boxes with a set of digital TV channels, which are already included in the price.

The main thing is from time to time to be distracted from watching your favorite TV shows in order to devote time to your family.