How to configure FTP server through an asus router

DDNS function in ASUS routers: how to connect and configure?

If you have an ASUS manufacturer router, then you can try the DDNS function. It allows you to replace dynamic IP addresses issued by the provider with a static IP address, or rather a domain name.

The ASUS DDNS function works on the principle of assigning a domain name to the router and the entire local network that he controls. With its help, you can get remote access through the Internet to the router. A specially configured VPN network will help open the router settings remotely from anywhere in the world if the device (PC or smartphone) is connected to the network.

Additionally, using DDNS, you can set the IP camera address (it works if the provider “throws” you only white IP addresses). Also, through an ASUS router, you can configure the FTP server by setting instead of the IP address, the DDNS domain name. And, of course, DDNS can be configured on a static (white) iconchik.

What is DDNS service and how to set up on a router? Details in the following

Choosing a server router

Of course, there are often no way to launch services that perform server functions on standard firmware, so you will have to use firmware made on open.Type operating systems. NIX (Linux, Frebsd, etc.). These firmware are developed by the enthusiasts community and are not commercial, t.E. They can be freely downloaded on the Internet and use at your discretion freely modernizing and changing. There are several free alternative firmware:

  • Openwrt. The most well.Known firmware that allows you to deploy the server by setting up configuration files, supports the package installation of programs that exist more than 3000;
  • DD-WRT is another well-known micro-program developed for users who do not want or do not know how to rule configuration files. Tuned through the web-integer;
  • Tomato. Suitable for routers on Broadcom chips;
  • Oleg firmware. Only for ASUS routers.

In order to decide whether your router is suitable for installing alternative firmware, you need to go directly to the developers’ website and see the list of supported equipment. It is very important to understand that all the actions for the firmware are performed at their own peril and risk. No one gives a guarantee that this will work, and in some cases you can get a “brick”, t.E. Completely non.Working device. Another criterion is that the router should have a USB port for connecting a flash drive or external hard drive.

The process of installing the firmware of the router depends on each specific model, on the manufacturer and goes beyond the scope of this article. On the Internet you can find enough materials on this topic. There are also detailed documentation for their installation on the sites of firmware developers.

Method 1. Built.In ftp

For rare use, you forget that the Windows already has a built.In FTP, so you don’t need to walk far. But it is turned off by default, so let’s start from the very beginning. All by the example of Windows 7, we try on the “top ten” similarly or go to the next section, where we will set a third.Party solution.

Свой FTP сервер.

  • Press “Turning on or disconnecting Windows components”. In the window that opens, we go to IIS-FTP server. And celebrate all subcuncts with a tick. At the end, do not forget to press the OK button.
  • In the window that appears, we set the name ftp site. You can actually be any. We will call as it is. Wifigid.Ru. And physicine path to the folder with which the exchange will occur. We have a completely disk D:
  • On the left side we highlight the “Rules for incoming connections” tab, and on the right we are looking for “FTP server” and “traffic-FTP server in passive mode”. Click on them with the right mouse button and click “Turn on”. So we activated the rules for incoming connections. Before that, there were no rules at all:
  • Now the server is included, the rules are created, but you need to determine users who can interact with the server. Come on: control panel. System and safety. Administration. Computer management:
  • Saw in the list of users of their newly created? Now you need to shove it into the ftp group. Click the right button on it. Properties. And then we go to the “membership in groups” tab, where add the group through the button:
  • Already almost everything is ready. FTP works, the user is. But Windows just won’t let anyone use their resources if you are not an administrator. Therefore, we need to allow our user to interact with the folder allocated for the needs of FTP. Click on it with the right button. Properties. On the Safety tab, click on the “Change” button:
  • Now we return to the IIS services again and go to set up our rules for authorization. We click on our site created here and select the “FTP authorization Rules”:
  • By default, access can be made without authorization, but we don’t want anything bad? (if we want, everything related to the creation of the user could be missed at all). Select here the item “The indicated roles or groups of users” and enter our FTP group:
  • But as an alternative, you can, for example, resolve the connection of anonymous users, but limit them in rights only to reading. Then they will not remove anything:

Behind this, we finish the first option. I hope you managed to configure the FTP server.

Settings of port redirections

Now is a minute of clarification. When primary setting by default, the DHCP service works on all Internet centers inside. She automatically distributes the IP address to different devices. But the problem is that this service itself can sometimes change addresses, but we do not need it. We need to configure static and constant IP for the right device. Otherwise, you will knock at one point, but you will not open it. Since the device will have another IP address.

See also  How to listen to music through Bluetooth headset jabra

First we need to connect to the router network. This can be done by wire or Wi-Fi-there is no particular difference. I choose a cable connection. We take the wiring and insert one end into the LAN port, and the other into the network card of a computer or laptop. If you are already connected to the network of the device, then just open the browser and enter into the address line: 192.168.One.One.

After that, you will be asked to introduce a login (admin. By default) and password (Admin. By default). If the data is not suitable, remember. It is also possible that it was tuned with workers from the provider, then you should call them.

configure, server, asus, router
  • Now that you are in the grocery of the device, you need to select the “local network” in the left menu. Now select the second tab “DHCP server“. You need to install a checkmark so that you can set the IP address manually (look at the picture above). Now you need to select the right device from the MAC address list.
  • If it is not yet connected to the network, then you can enter it manually. Then immediately on the left you will see the selected IP address, but you can also change it to any of the range 2-254. To add the device. Click on a plus.
  • First of all, you need to know which port you need to open. For example, if you use some kind of network program, for example, utorrent, then you can see which port you can open-you can in the settings. Therefore, first of all, you should clearly represent which port to open. If you use some kind of program, or for example, an online group, then you can see which ports it uses on the Internet or using the TCPView program-download the program from the official website. We launch a program or a game on which we want to check the port. After that, start TCPView and look at the Remote Port column according to our program.
  • After that, we go “Internet”. “porting ports”. Now we turn on the service. See there are two more lower points “List of Selected Servers”-by choosing from there you will immediately receive a port of default for these types-servers.
  • If you have not found your type of server, or the game, you will have to fill in it. In the “Service name”. You can introduce any understandable name, for example “http server”. External port. Here we indicate our main port through which we will knock on the device. You can specify the port range using the colon (for example, 1400: 14500) or for example, through a comma, write several values: 80, 8080, 5000. Internal port. It can not be indicated (if you do not know it), or duplicate the meaning of the internal ports. Local/internal IP address is just the static IP device that we indicated earlier. I set address 192.168.One.166 and I put the same here (you may have a different meaning). The source/external IP. We do not indicate that it is needed in order to have access to this port from the outside (from the Internet) only from the selected device (with static IP). At the very end, indicate the UDP, TCP or both (Both) protocol, according to which a connection will be. Click on plusik and at the end just below “apply”.
  • Also check one setting (it is on some firmware). Go to “Administration”, go to the “System” tab, scroll down to the “remote access configuration” and turn on this function.
  • If you have a dynamic external IP (which is most likely), then you need to turn on DDNS. This service is located in the “Internet” section. We turn on the service and in the line “Name of the host” we come up with any DNS, then click “Apply”.

ATTENTION! DDNS will not work with a gray IP address. We read about gray and white IP in detail here.

To check the passage, you need to enter our external IP address from the Internet to the address bar of the browser. If you have a dynamic (as mine), then we introduce DDNS, which we created. And after the address through the colon (:) indicate the port. For example:

67.168.89.234: 8080 or Wifigidborodach.Asuscomm.Com: 80

Next, immediately check the port of the port. If you have any problems with a program or computer, after that, I would advise for a while to turn off the antivirus that can block such a connection. If redirection does not occur, then check the correctness of the entered data in the ASUS settings. You can also safely write your questions in the Комментарии и мнения владельцев below, and I will try to answer them.

Setting FTP server on ASUS router via Aidisk in the old version of the admin panel

Since the ASUS devices are quite good reliability, today you can find quite working models of release five to twenties ago. Therefore, in this article I will show how to launch an ASUS FTP server on both the old and new software version.

Entrance to 192.168.0.100 via Aidisk in the old version of the admin

So, in the case we have our good old router RT-N10U. All the firmware of this company of one generation has a similar integer, so the management will be useful to owners of any models. In those of them who have a USB connector, AIDISK utility is immediately preinstalled. Therefore, it will be easy for you to navigate.

So, we connect the drive. It can be either a simple flash drive, or a full.Fledged external hard drive with autonomous power supply from a power grid, which is preferable.

We go to the router control panel at http: // 192.168.One.1 “and select in the” Aidisk “menu. If the page below does not appear, then you need to wait and restart the settings master until the router recognizes the drive.

Click the only existing button and select the access mode to the future ftp server.

I will prefer the third option, and later it will be possible to set a separate password for those who just want to use file repository.

Of course, the login and password will need to be changed to its own.

See also  How to log in to zte router. It won't turn on

Access to FTP ASUS server from the Internet

I have already explained that it allows you to replace your white dynamic external IP address to the domain name if you have a white external icon (Read more about the DDNS service). If you have a router from another manufacturer, such as ZYXEL, then it will most likely support the well-known DDNS services, such as No-IP.Com, about which I already talked on this blog.

ASUS router in standard firmware does not support them, since this manufacturer has its own service. And to support third.Party DDNS, you need to put non.Original firmware. Therefore, we will also register a new account in the ASUSCOMM service.Com. If you do not want the FTP server to work on the Internet, but only on the apartment, then select the option “Skip the ASUS DDNS settings”. Later in another section. Wan tab “DDNS”. It will be possible to configure this function separately.

  • At the external address http: // Your youth.Asuscomm.Com
  • Or ftp: // 192.168.One.1 for users of the internal network, which is quite simple to enter in the browser.

On some models of ASUS routers, to operate the FTP server, you must set a specific port. By default it is “2121”, that is, the final address for internal use in the local network looks like “http: // 192.168.One.1: 2121 “. In some other models, the IP server may differ, for example, the type of “192.168.0.100: 2121 “.

We open this page enter the specified login and password and get into the storage:

Now you can also go to the USB application section and see users who are allowed to access files, and a list of all documents on USB flash drive, which is now a full-fledged FTP file with Wi-Fi access.

Also, having chosen a certain user, you can set for him the right to access each separate folder. To do this, install the corresponding flags opposite these folders:

Error when it does not come to address 192.168.L.L00 or 192.168.0.L00

What to do in a situation if it is not possible to enter the FTP server asus? I will not write about banal errors in work or incorrect settings.

I noticed that very often people are simply incorrectly dial the IP address of the file storage. For example, instead of the number “1” they write the letter “l”, which is very similar in writing. Type 192.168.L.L00 or 192.168.0.L00. Don’t have to do this. Only numbers in the address!

I invite everyone to follow the exile and get acquainted with the official article on the creation of media and the FTP server. This is the ASUS technical assistance site, perhaps it will also help to understand this issue.

General access to the FTP drive through Wi-Fi Router ASUS

Take a flash drive or external hard drive and insert it into the USB router USB. If there is already some information on the disk, it will not be lost. However, if you have important documents, you should copy them to the computer. After connection, it is recommended to restart the router.

Further, on a computer connected to the router, run any browser and go to 192.168.One.One. Enter your user name and password. If you have not changed it, go to factory administration and administration. Or see detailed instructions on how to enter the system at 192.168.One.1 on the ASUS router.

Immediately after the main page where the network card is displayed, you should see information about the discount discs.

In the settings, go to the ‘USB-Application’ tab and select ‘File/Media-Server’.

Immediately on the new page, open the ‘FTP Share’ tab and activate the switch opposite ‘Enable FTP’. There will be a message that overseas will be available at overall access; Click ‘Ok’.

Now the server is launched and you can connect to it from your computer or mobile device. We will show you how to do it in the near future. But first, this is what you need to know about joint use and entry into the account ftp.

How to setup FTP on a ASUS ROUTER

After your server is launched, it works by login and password. By default, one account. Admin. And this is a description of the router itself. This means that in order to connect to the FTP server, you need to specify the user name and the password that you indicated at the entrance to the settings of the router. By default it is Admin and Admin, but this can be changed on the Administration. System tab.

In addition, if you want to disable authentication by the user and password and connect to the server anonymously, you can enable the switch next to the option to allow anonymous input.

However, if you do this, the disc will not be protected, and any client connected to the router will be able to connect to the server. We still recommend not to include anonymous entrance to the system.

General access to the FTP drive through Wi-Fi Router ASUS

We take our USB flash drive, or external HDD, and connect to the router in the USB connector. If the drive already has information, then it will not be lost. But, if there are some important documents, then it is better to copy them to the computer. After connection, it is advisable to restart the router.

Further, on the computer that is connected to the router, we launch any browser, and go to address 192.168.One.One. Authorization page will appear. Indicate the user name and password. If you did not change them, then the factory admin and admin. Or, we look at detailed instructions on how to go to 192.168.One.1 in ASUS routers.

configure, server, asus, router

Immediately on the main page, where the network is a network, you should see information on the connected drive.

In the settings, we go to the ‘USB application tab’, and select ‘file/media server’.

On the new page, we immediately open the ‘General Resource tab in ftp’, and on the contrary ‘turn on ftp’ we transfer the switch to the ON position. A message will appear about the opening of a general access to the disk. Click OK.

That’s all, the server is already working, and you can connect to it from your computer, or mobile devices. Now I will show how to do it. But, before that, we will find out some points with total access, and accounts for connecting to ftp.

See also  Not supported on your Xiaomi device

As soon as we launched the server, it works with login and password access. By default, one account. Admin. And this is the account of the router itself. That is, to connect to the FTP server, you will need to specify the user name and the password that you indicated when entering the router settings. Factory Admin and Admin, and they can be changed on the ‘Administration tab’. ‘system’.

And if you want to turn off the authorization by login and password, perform an anonymous connection to the server, then opposite the ‘Allow anonymous input’ set the switch to the ON position.

But then our drive will not be protected, and any client who is connected to the router will be able to connect to the server. I still advise you not to turn on an anonymous entrance.

Connect the flash drive to the TP-Link router and set up the FTP server

I will show on the example of the router TP-Link Archer C20i. I connected an ordinary flash drive to it. You also connect your drive to the USB router connector. I did it like this:

The router must be turned on. And the device from which you will configure must be connected to the router via Wi-Fi, or by network cable.

Then we open any browser, and go to TPLINKLOGIN address.Net, 192.168.One.1, or 192.168.0.One. The exact address is indicated on the sticker from the bottom of the router. On the authorization page, we indicate the user name and password. If you did not change them, then this is admin and admin. If it does not work, then see detailed instructions.

Go immediately to the ‘USB Settings’ (USB settings)-‘USB Mass Storage’ (USB storage). On this page, the USB drive will be displayed, which we connected to the router.

Convinced that the drive is and it works. Then I would advise you to turn off the joint access to this drive, since it is for some reason by default. So that it is not displayed on devices in the local network. And used only for FTP server. To do this, open the ‘Storage Sharing’ tab (joint access) and click on the ‘Disable’ button (turn off).

We go to the ‘Ftp Server’ tab. It should be included in the status ‘Enabled’. By default, I was turned on.

By default, a catalog of ‘Volume’ with access to the entire drive has already been created. And with administrator rights. I’ll explain now. The server itself is already working, and you can access it. By default, access is tuned to the entire drive. And with the rights of the administrator ‘Super User’. Administrator rights give full access to files on the drive. Including, to change them.

This means that we can already access the FTP server from any device connected to our router. To do this, on the ‘USB Settings’.‘ Ftp Server ’tab, on the right (where the instruction is), copy the ftp address (or just remember, we will need it):

To obtain access, we will need to specify the user name and password. This is the same data that we indicated at the entrance to the settings of the router (factory. Admin and Admin).

configure, server, asus, router

If you want access to FTP to be all the drive (and not to a particular folder), and access was only with the rights of the administrator (with all rights), then you can immediately move on to connect to the server on a computer.

And if you need to configure access only to a particular folder, and create other users (with different access rights), then I will tell you how to do this at the end of this article.

Another important point: as I already wrote above, by default, access to a tp-link ftp router is provided to the server with administrator rights. Under the name of the user and the password of the administrator. If you have not changed the standard ADMIN password, which is used to enter the router settings, I strongly recommend this to do this. Since this password and the standard user name (which is also Admin) will be used to connect to FTP server. I already wrote about how to change the factory password of the router. On TP-Link, this is done on the ‘System Tools’ (System tools) tab-‘Password’ (password).

FTP server and AIDISK

To make a FTP server from a router, install a flash drive in a USB port. The USB drive should appear on the start tab (perhaps you must first select one of several drives). By the way, the Entent-Asus website contains a list of compatible drives (Networks/Disksuport/). Looking through the compatibility table, it becomes clear: the ASUS Wi-Fi does not always understand the formatting of NTFS, if you use the drive for reading and writing. Therefore, it is better to format the USB flash drive in FAT32 or even FAT16, but the Ext2/Ext3 Linux options are also acceptable. To further configure the router. You need to open the USB Application tab, click on the Aidisk line, then click GO. The following tab will appear:

Here they set new users and rights for them (but you can immediately press Next, and create users after configuration). By pressing Next, it will be necessary to decide whether to use the ASUS DDNS service (the server will be available by the domain name), or to ignore this option:

In the first case, it will be necessary to set the name FTP server. Then, press Next and Finish. When using the DDNS, Wi-Fi option, the ASUS router becomes available from the external network in the following name: Test.Asuscomm.Com (in our example). FTP port. Standard, “21”. Actually, if the provider gives the subscriber a certain IP address, access to the server is possible at the address, and not at the domain name. If you know your IP (and it is not “gray”), then the ASUS DDNS option can be considered unclaimed. Manage the server, create new folders, change rights and create new users. You can on the USB Application tab. “FTP Share”:

Here the Inte we is intuitive: “Round plus” creates a user, “plus on a leaf”. Creates a folder. Successful routing!

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE