How to Check Firmware On Samsung 8160

# 06 #. show IMEI (International Mobile Equipment Identity). international mobile equipment identifier

# 1234 #. Firmware version
# 7353 #. Test menu
# 0 #. Extended test menu
# 0011 #. Service mode
# 2683662 #. Extended Service Mode
# 0228 #. Battery status
# 0808 #. USB settings
# 2663 #. Extended firmware version
# 74123465. Camera firmware standard

Samsung # 9998947 # (without SIM)

Samsung Security Code: 0000, 00000000;

standard codes. 1234 or 0000
eprom reset: 27672878 # (code removal)
X100, X600. remove simlock # 7337 # list of locks # 7465625

27673855 #. FULL E2P RESET
27672878 #. CUSTOM E2P RESET
# 7337 #. UNLOCK
2767688 #. UNLOCK
# 0523 #. CONTRAST
# 9998523 #. CONTRAST
# 89998378 #. Service Menu (X100)

SGH-600
# 06 #. Shows IMEI.
# 9999 #. Shows the software version.
# 0837 #. Shows software version (instructions)
# 0001 #. Shows Serial Parameters
# 9125 #. Activates the smiley when charging.
# 9998228 #. Battery status (capacity, voltage, temperature)
# 9998246 #. Program status
# 9998289 #. Change call frequency
# 9998324 #. Debugger screen
# 9998364 #. Watchdog
# 9998377 #. EEPROM Error Stack. Use side keys to select values. Cancel and ok.
# 9998427 #. Trace watchdog
# 9998523 #. Change the contrast of the display. Only for version G60RL01W
# 9998544 #. Jig detect
# 9998636 #. Memory status
# 9998746 #. SIM file size
# 9998778 #. SIM Service Table
# 9998785 #. RTK (Run Time Kernel) errors. if ok then phn is reset, info is put in memory error.
# 9998786 #. Run, Last UP, Last DOWN
# 9998837 #. Software version
# 9998842 #. Vibrator test. The backlight flashes for 10 seconds and the vibrator turns on.
# 9998862 #. Vocoder Reg. Normal, Earphone or carkit can be selected
# 9998872 #. Diag
# 9998947 #. Reset On Fatal Error
# 9998999 #. Last / chk
# 99989266 #. Yann debug screen (= Debug Screens?)
# 99989999 #. Software version
0001sft #. Changes serial parameters (s = ?, f = 0.1, t = 0.1) (incomplete)
0002? is unknown
0003? #. is unknown

SP unlock SGH-600 and SGH 2100

27673855 #. Full reset l EEPROM (This code deletes the SP-lock !!)
But also changes the IMEI to 447967-89-400044-0. To restore your old IMEI, use the appropriate software (at your own risk)

27672878 #. User reset EEEPROM
This code has been tested on Samsung SGH-600 with software version FLD_2C6 G60SB03X

SAMSUNG
a800 unlock. 2767637 #
Samsung
x100, x600.
Unlock: # 7337 #
Customer Reset: “27672878 #”.
WAP Reset: “2767927 #”
Full Reset: “27673855 #”

Samsung
27673855 #. FULL E2P RESET
27672878 #. CUSTOM E2P RESET
# 7337 #. UNLOCK
2767688 #. UNLOCK
# 0523 #. CONTRAST
# 9998523 #. CONTRAST
# 89998378 #. Service Menu (X100)

2767688 # = Unlocking Code
# 89998378 # = All in one Code
# 47778665 # = GPSR Tool
# 8999523 # = LCD Brightness
# 89993825523 # = External Display
# 8999377 # = Errors
# 5737425 # = JAVA Something] [/ b]
# 2255 # = Call List

# 536961 # = Java Status Code
# 536962 # = Java Status Code
# 536963 # = Java Status Code
# 53696 # = Java Status Code

# 1200 # = AFC DAC Val
# 1300 # = IMEI
# 1400 # = IMSI

# 2562 # =. White for 15 secs than restarts.
# 2565 # = ChAeck Blocking
# 3353 # = Check Code
# 3837 # =. White for 15 secs than restarts.
# 3849 # =. White for 15 secs than restarts.
# 3851 # =. White for 15 secs than restarts.
# 3876 # =. White for 15 secs than restarts.

# 7222 # = Operation Typ (Class C GSM)
# 7224 # = I Got !! ERROR !!
# 7252 # = Oparation Typ (Class B GPRS)
# 7271 # = Multi Slot (Class 1 GPRS)
# 7274 # = Multi Slot (Class 4 GPRS)
# 7276 # = Dunno
# 7337 # = EEPROM Reset (Unlock and Resets Wap Settings)
# 2787 # = CRTP ON / OFF
# 3737 # = L1 Dbg data
# 5133 # = L1 Dbg data
# 7288 # = GPRS Attached
# 7287 # = GPRS Detached
# 7666 # = SrCell Data
# 7693 # = Sleep Act / DeAct (Enable or Disable the Black screen after doing nothing for a while)
# 7284 # = Class: B, C or GPRS
# 2256 # = Calibration Info
# 2286 # = Battery Data
# 2527 # = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
# 2679 # = Copycat feature (Activate or Deactivate)
# 3940 # = External loop test 9600 bps
# 4263 # = Handsfree mode (Activate or Deactivate)
# 4700 # = Half Rate (Activate or Deactivate)
# 7352 # = BVMC Reg value
# 8462 # = Sleeptime
# 2558 # = Time ON
# 3370 # = EFR (Activate or Deactivate)
# 3941 # = External looptest 115200 bps
# 5176 # = L1 Sleep
# 7462 # = SIM phase
# 7983 # = Voltage / Frequenci (Activate or Deactivate)
# 7986 # = Voltage (Activate or Deactivate)
# 8466 # = Old time
# 2255 # = Call.
# 5187 # = L1C2G trace (Activate or Deactivate)
# 5376 # =. White for 15 secs than restarts.
# 6837 # = Official Software Version
# 7524 # = KCGPRS
# 7562 # = LOCI GPRS
# 7638 # = RLC allways open ended TBF (Activate or Deactivate)
# 7632 # = Sleep mode Debug
# 7673 # = Sleep mode RESET
# 2337 # = Permanent Registration Beep
# 2474 # =.
# 2834 # = Audio Path
# 3270 # = DCS support (Activate or Deactivate)
# 3282 # = Data (Activate or Deactivate)
# 3476 # = EGSM (Activate or Deactivate)
# 3676 # = Flash volume formated
# 4760 # = GSM (Activate or Deactivate)
# 4864 # = Dunno doesn’t work on newer versions
# 5171 # = L1P1
# 5172 # = L1P2
# 5173 # = L1P3
# 7326 # = Accessory (I got Vibrator)
# 7683 # = Sleep variable (8)
# 7762 # = SMS Brearer CS (Activate or Deactivate)
# 8465 # = Time in L1
# 9795 # = wtls key
# 2252 # = Current CAL
# 2836 # = AVDDSS Management (Activate or Deactivate)
# 3877 # = Dump of SPY trace
# 7728 # = RSAV done # (Everything went to standart but nothing was deleted)
# 2677 # = ARM State (None or Full Rate)
# 8999636 # = Have no clue what it is, i see 20 lines
# 9999 # = Software version
# 89998376263 # = HW ver, SW ver and Build Date
# 8888 # = HW version
# 8377466 # = Same HW / SW version thing

# 7465625 # = Check the locks
7465625638Code # = Enables Network lock
# 7465625638Code # = Disables Network lock
7465625782Code # = Enables Subset lock
# 7465625782Code # = Disables Subset lock
746562577Code # = Enables SP lock
# 746562577Code # = Disables SP lock
746562527Code # = Enables CP lock
# 746562527Code # = Disables CP lock
7465625746Code # = Enables SIM lock
# 7465625746Code # = Disables SIM lock
7465625228 # = Activa lock ON
# 7465625228 # = Activa lock OFF
746562528638 # = Auto Network lock ON
# 746562528638 # = Auto Network lock OFF
746562528782 # = Auto subset lock ON
# 746562528782 # = Auto subset lock OFF
74656252877 # = Auto SP lock ON
# 74656252877 # = Auto SP lock OFF
74656252827 # = Auto CP lock ON
# 74656252827 # = Auto CP lock OFF
746562528746 # = Auto SIM lock ON
# 746562528746 # = Auto SIM lock OFF

27673855 # = E2P Full Reset
27672878 # = E2P Custom Reset
2767927 # = E2P Wap Reset
2767226372 # = E2P Camera Reset
# 6420 # = MIC Off
# 6421 # = MIC On
# 6422 # = MIC Data
# 6428 # = MIC Measurement
# 3230 # = Trace enable and DCD disable
# 3231 # = Trace disable and DCD enable
# 3232 # = Current Mode
# 7263867 # = RAM Dump (On or Off)
276749927 # = Germany WAP Settings
276744927 # = UK WAP Settings
276731927 # = Netherlands WAP Settings
2767420927 # = Czech WAP Settings
276743927 # = Austria WAP Settings
276739927 # = Italy WAP Settings
276733927 # = France WAP Settings
2767351927 # = Portugal WAP Settings
276734927 # = Spain WAP Settings
276746927 # = Sweden WAP Settings
2767380927 # = Ukraine WAP Settings
27677927 # = Russia WAP Settings
276730927 # = GREECE WAP Settings
276773738927 # = WAP Settings Reset
276749667 # = Germany MMS Settings
276744667 # = UK MMS Settings
276731667 # = Netherlands MMS Settings
2767420667 # = Czech MMS Settings
276743667 # = Austria MMS Settings
276739667 # = Italy MMS Settings
276733667 # = France MMS Settings
2767351667 # = Portugal MMS Settings
276734667 # = Spain MMS Settings
276746667 # = Sweden MMS Settings
2767380667 # = Ukraine MMS Settings
27677667 #. = Russia MMS Settings
276730667 # = GREECE MMS Settings
335 # = Delete all MMS Messages
663867 # = Dump Mm file
# 536961 # = WAPSAR enable / http disable
# 536962 # = WAPSAR disable / http enable
# 536963 # = Serial eable / Others disable
# 53696 # = Java Download Mode
# 5663351 # = Wap Model ID [Your Model]
# 5663352 # = Wap Model ID [SEC-SGHXXXX / 1.0]
# 566335 # = Wap Model ID [SEC-SGHXXXX / 1.0]
276766335 # = Check on which model it is
27677100 # = SEC-SGHS100 / 1.0
27678200 # = SEC-SGHV200 / 1.0
27677300 # = SEC-SGHS300 / 1.0
27677650 # = Nokia7650 / 1.0
27672877368 # = Reset WAP Model ID to standart

Samsung Mobile Codes Global Codes.

# 1234 # = Firmware Version.
# 2222 # = H / W Version.
# 89998376263 # = All Versions Together.
# 89998378 # = Test Menu.
# 47778665 # = GPSR Tool.
# 8999523 # = LCD Brightness.
# 8999377 # = Error Menu.
# 8999327 # = EEP Menu.
# 8999667 # = Debug Mode.
# 92782 # = PhoneModel. (Wap)
# 5737425 # = JAVA Mode.
# 2255 # = Call List.
# 232337 # = Bluetooth MAC Address.
# 5282837 # = Java Version.
# 4773 # = Incremental Redundancy.
# 7752 # = 8 PSK uplink capability bit.
# 7785 # = Reset wakeup RTK timer cariables / variables.
# 7200 # = Tone Generator Mute.
# 3888 # = BLUETOOTH Test mode.
# 7828 # = Task screen.
## 8377466 # = S / W Version H / W Version.
# 2562 # = Restarts Phone.
# 2565 # = No Blocking? General Defense.
# 3353 # = General Defense, Code Erased.
# 3837 # = Phone Hangs on White screen.
# 3849 # = Restarts Phone.
# 3851 # = Restarts Phone.
# 3876 # = Restarts Phone.
# 7222 # = Operation Typ: (Class C GSM)
# 7224 # =. ERROR.
# 7252 # = Operation Typ: (Class B GPRS)
# 7271 # = CMD: (Not Available)
# 7274 # = CMD: (Not Available)
# 7337 # = Restarts Phone. (Resets Wap Settings)
# 2787 # = CRTP ON / OFF.
# 2886 # = AutoAnswer ON / OFF.
# 3737 # = L1 AFC.
# 5133 # = L1 HO Data.
# 7288 # = GPRS Detached / Attached.
# 7287 # = GPRS Attached.
# 7666 # = White Screen.
# 7693 # = Sleep Deactivate / Activate.
# 7284 # = L1 HO Data.
# 2256 # = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
# 2286 # = Databattery.
# 2527 # = GPRS switching set to (Class 4, 8, 9, 10)
# 2679 # = Copycat feature Activa / Deactivate.
# 3940 # = External looptest 9600 bps.
# 4263 # = Handsfree mode Activate / Deactivate.
# 4700 # = Please use function 2637.
# 7352 # = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
# 2558 # = Time ON.
# 3370 # = Same as 4700.
# 3941 # = External looptest 115200 bps
# 5176 # = L1 Sleep.
# 7462 # = SIM Phase.
# 7983 # = Voltage / Freq.
# 7986 # = Voltage.
# 8466 # = Old Time.
# 2255 # = Call Failed.
# 5187 # = L1C2G trace Activate / Deactivate.
# 5376 # = DELETE ALL SMS.
# 6837 # = Official Software Version: (0003000016000702)
# 7524 # = KCGPRS: (FF FF FF FF FF FF FF FF 07)
# 7562 # = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
# 2337 # = Permanent Registration Beep.
# 2474 # = Charging Duration.
# 2834 # = Audio Path. (Handsfree)
# 3270 # = DCS Support Activate / Deactivate.
# 3282 # = Data Activate / Deactivate.
# 3476 # = EGSM Activate / Deactivate.
# 3676 # = FORMAT FLASH VOLUME.
# 4760 # = GSM Activate / Deactivate.
# 4864 # = White Screen.
# 5171 # = L1P1.
# 5172 # = L1P2.
# 5173 # = L1P3.
# 7326 # = Accessory.
# 7683 # = Sleep variable.
# 8465 # = Time in L1.
# 2252 # = Current CAL.
# 2836 # = AVDDSS Management Activate / Deactivate.
# 3877 # = Dump of SPY trace.
# 7728 # = RSAV.
# 2677 # = Same as 4700.
# 3728 # = Time 2 Decod.
# 3725 # = B4 last off.
# 7372 # = Resetting the time to DPB variables.
# 7732 # = Packet flow context bit Activate / Deactivate.
# 6833 # = New uplink establishment Activate / Deactivate.
# 3273 # = EGPRS multislot. (Class 4, 8, 9, 10)
# 7722 # = RLC bitmap compression Activate / Deactivate.
# 2351 # = Blinks 1347E201 in RED.
# 4472 # = Hysteresis of serving cell: 3 dB
# 2775 # = Switch to 2 inner speaker.
# 9270 # = Force WBS.
# 7878 # = FirstStartup. (0 = NO, 1 = YES)
# 3757 # = DSL UART speed set to. (LOW, HIGH)
# 8726 # = Switches USBACM to Normal.
# 8724 # = Switches USBACM to Generator mode.
# 8727 # = Switches USBACM to Slink mode.
# 8725 # = Switches USBACM to Loop-back mode.
# 3838 # = Blinks 3D030300 in RED.
# 2077 # = GPRS Switch.
# 2027 # = GPRS Switch.
# 0227 # = GPRS Switch.
# 0277 # = GPRS Switch.
# 8370 # = Tfs4.0 Test 0.
# 8371 # = Tfs4.0 Test 1.
# 8372 # = Tfs4.0 Test 2.
# 8373 # = Tfs4.0 Test 3.
# 8374 # = Tfs4.0 Test 4.
# 8375 # = Tfs4.0 Test 5.
# 8376 # = Tfs4.0 Test 6.
# 8377 # = Tfs4.0 Test 7.
# 8378 # = Tfs4.0 Test 8.
# 8379 # = Tfs4.0 Test 9.
# 7878 # = FirstStartup. (0 = NO, 1 = YES)
# 3838 # = Blinks 3D030300 in RED.
# 2077 # = GPRS Switch.
# 2027 # = GPRS Switch.
# 0227 # = GPRS Switch.
# 0277 # = GPRS Switch.
# 22671 # = AMR REC START.
# 22672 # = Stop AMR REC. (File name: / a / multimedia / sounds / voice list / ENGMODE.amr)
# 22673 # = Pause REC.
# 22674 # = Resume REC.
# 22675 # = AMR Playback.
# 22676 # = AMR Stop Play.
# 22677 # = Pause Play.
# 22678 # = Resume Play.
# 77261 # = PCM Rec Req.
# 77262 # = Stop PCM Rec.
# 77263 # = PCM Playback.
# 77264 # = PCM Stop Play.
# 22679 # = AMR Get Time.
# 8999364 # = Watchdog ON / OFF.
# 8999427 # = WATCHDOG signal route setup.
2767226372 # = Camera Reset. (deletes photos)
27673855 # = E2P Full Reset.
27672878 # = E2P Custom Reset.
2767927 # = E2P Wap Reset.
2767226372 # = E2P Camera Reset.
2767688 # = Reset Mobile TV.
# 7263867 # = RAM Dump. (On or off)

samsung mobile code wap / mms code.
276743927 # = Austria WAP Settings.
2767420927 # = Czech WAP Settings.
276733927 # = France WAP Settings.
276749927 # = Germany WAP Settings.
276730927 # = Greece WAP Settings.
276739927 # = Italy WAP Settings.
276731927 # = Netherlands WAP Settings.
2767351927 # = Portugal WAP Settings.
27677927 # = Russia WAP Settings.
276734927 # = Spain WAP Settings.
276746927 # = Sweden WAP Settings.
276744927 # = UK WAP Settings.
2767380927 # = Ukraine WAP Settings.
276773738927 # = WAP Settings Reset.

276743667 # = Austria MMS Settings.
2767420667 # = Czech MMS Settings.
276733667 # = France MMS Settings.
276749667 # = Germany MMS Settings.
276730667 # = Greece MMS Settings.
276739667 # = Italy MMS Settings.
276731667 # = Netherlands MMS Settings.
2767351667 # = Portugal MMS Settings.
27677667 # = Russia MMS Settings.
276734667 # = Spain MMS Settings.
276746667 # = Sweden MMS Settings.
276744667 # = UK MMS Settings.
2767380667 # = Ukraine MMS Settings.
samsung mobile code email code.
# 36245 # Turns Email TestMenu on.
276722236245 # Email EPP set (.)!
2767837836245 # Email Test Account!
276729536245 # Email Test2 Account!
2767036245 # Email EPP reset!
2767136245 # Email EPP set (1)!
2767736245 # Email EPP set (7)!
27673036245 # Email.
27673136245 # Email.
27673336245 # Email.
27673436245 # Email.
27673936245 # Email.
27674136245 # Email.
27674336245 # Email.
27674436245 # Email.
27674536245 # Email.
27674636245 # Email.
27674936245 # Email.
27676036245 # Email.
27676136245 # Email.
27676236245 # Email.
27676336245 # Email.
27676536245 # Email.
27676636245 # Email.
27678636245 # Email.
276785236245 # Email.
samsung mobile code lock code.
# 7465625 # = Check the locks.
7465625638Code # = Enables Network lock.
# 7465625638Code # = Disables Network lock.
7465625782Code # = Enables Subset lock.
# 7465625782Code # = Disables Subset lock.
746562577Code # = Enables SP lock.
# 746562577Code # = Disables SP lock.
746562527Code # = Enables CP lock.
# 746562527Code # = Disables CP lock.
7465625746Code # = Enables SIM lock.
# 7465625746Code # = Disables SIM lock.
7465625228 # = Activa lock ON.
# 7465625228 # = Activa lock OFF.
746562528638 # = Auto Network lock ON.
# 746562528638 # = Auto Network lock OFF.
746562528782 # = Auto subset lock ON.
# 746562528782 # = Auto subset lock OFF.
74656252877 # = Auto SP lock ON.
# 74656252877 # = Auto SP lock OFF.
74656252827 # = Auto CP lock ON.
# 74656252827 # = Auto CP lock OFF.
746562528746 # = Auto SIM lock ON.
# 746562528746 # = Auto SIM lock OFF.
samsung mobile code sound code.
Samsung phones.
Dial # 6984125 #
Test menu dial # 9072641 # (You need this one i think.)
Click 5 Audio. 2 AP volume config

Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config

Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume

(SPK = Speaker) (Ear = Headset)

Tune Headset volume:
# 9072641 #. 2 EAR config. 3 Ringtone volume. Stap 6 tune it to 10
Tune movie volume:
# 9072641 #. 3 SPK config. 3 Ringtone volume. Stap 6 tune it to 10

Note it works but don’t forget to type somewhere your old settings.

ANDROID secret codes for Samsung Galaxy Ace II GT-I8160

DISCLAIMER: This information is intended for advanced users. It is not intended for ordinary users, hackers or mobile thieves. We will not be liable for the use or misuse of this information, including data loss or equipment damage. So use these codes at your own risk and for the benefit of the case.

## 225 ##. This code shows the number of holidays and events on your calendar.

## 426 ##. Information such as the history and some information about connecting to Google Play Services

## 759 ##. RLZ Debug UI (device identifier, activation status, some Ping things and some others)

Code :. ## 4636 ##
This code can be used to get information about your phone and battery. The following 4 menus are displayed on the screen:

Phone info
Battery Information
Battery history
Usage statistics

## 64663 ##. QC test. This code runs more than a dozen different tests (Screen, Bluetooth, camera, flash, microphone, headset, speakers, WLAN, battery, OTG, WiFi, sensors, etc.)

## 2486 ##. Engineering mode

## 36245 ##. Access email debug information

## 8255 ##. Gtalk Monitor Google instant messaging software package

Code :. ## 7780 ##
This code can be used to reset the factory settings. It will remove the following things:

Google Account Settings stored on your phone
System and application data and settings
Downloaded apps

This will NOT delete:

Current system software and related applications
SD card files such as photos, music files, etc.

PS: After you enter this code, you will see a window asking you to click the “Reset Phone” button. Thus, you get the opportunity to cancel your operation.

Code :. 27673855 #
Think before you enter this code. This code is used for factory reset. It will delete all files and settings, including internal memory. Also reinstall the phone firmware.

PS: After you enter this code, you cannot cancel the operation until you remove the battery from the phone. So think twice before entering this code.

Code :. ## 34971539 ##
This code is used to obtain information about the phone’s camera. Shows the following 4 menus:

Updating the camera firmware in the image (do not touch this option)
Updating the camera firmware on the SD card
Get camera firmware version
Get firmware update counter
WARNING. Never use the first option, otherwise the camera of your phone will stop working, and you will need to take the phone to a service center to reinstall the camera firmware.

Code :. ## 7594 ##
This code can be used to change the action of the “End Call / Power” button on your phone. By default, if you press the button for a long time, a screen will appear asking you to select any option from silent mode, flight mode and power off. You can turn on direct shutdown by pressing this button, so as not to waste time choosing.

Code :. ## 273283255663282 ##
This code opens a file copy screen where you can backup your media files, for example: photos, audio, and voice notes.

Code :. ## 197328640 ##
This code can be used to enter service mode. You can run various tests and change settings in the service mode.

WLAN, GPS and Bluetooth Test Codes:
## 232339 ## OR ## 526 ## OR ## 528 ##. WLAN test (Use the Menu button to run various tests)

## 232338 ##. Shows WiFi MAC address A MAC address is a unique code assigned by the manufacturer to a network device (for example, a wireless network adapter or ethernet adapter). MAC is short for Media Access Control. Each code is assumed to be unique to a particular device.

## 1472365 ##. GPS test Samsung Galaxy Ace II GT-I8160

## 1575 ##. Another GPS test The Global Positioning System (GPS) is part of the NAVSTAR complex, which is designed, implemented and operated by the US Department of Defense. The development of the NAVSTAR complex (NAVigation Satellites providing Time And Range. a navigation system for determining the time and range) was started back in 1973, and on February 22, 1978 the first test launch of the complex was carried out, and in March 1978 the NAVSTAR complex began to operate.

## 232331 ##. Bluetooth test Samsung Galaxy Ace II GT-I8160

## 232337 ##. Shows the address of the Bluetooth device

## 8255 ##. This code can be used to start GTalk Service Monitor.

Codes for obtaining information about the firmware version:
## 49862650468 ##. PDA, Phone, H / W, RFCallDate

## 1234 ##. PDA and Phone

## 1111 ##. FTA SW Version

## 2222 ##. FTA HW Version

## 44336 ##. PDA, Phone, CSC, Build Time, Changelist number

Codes for running various factory tests:

## 0283 ##. Packet loopback

## 0673 ## OR ## 0289 ##. Melody test

## 0842 ##. Device test (Vibration test and BackLight test)

How to Check Firmware On Samsung 8160

## 2663 ##. Touch screen version

## 2664 ##. touch screen test

## 0588 ##. Proximity sensor test

## 3264 ##. RAM version Samsung Galaxy Ace II GT-I8160

GSM codes for Samsung Galaxy Ace II GT-I8160
These codes, dialed from a GSM telephone, are used to enable or disable various standard functions and services. Some of them duplicate the functions of the menu, some not.

Legend:
@ = send button (Handset, OK, YES, Navi)
= enable or activate
= active
## = disable and deactivate
# = inactive

CHANGE PIN CODE Samsung Galaxy Ace II GT-I8160
Change PIN 1 04 old PIN1 new PIN1 new PIN1 # @
Change PIN 2 042 old PIN2 new PIN2 new PIN2 # @
Unlock PIN 1 05PUKnewPIN1newPIN1 # @
Unlock PIN 2 052PUK2new PIN2new PIN2 # @

PUK. code that must be provided by the operator when buying a phone or connecting. In the absence of this code, or entering the wrong PUK ten times, your phone will be completely blocked!

TO SHOW IMEI Samsung Galaxy Ace II GT-I8160
Show IMEI # 06 # IMEI (International Mobile Equipment Identity) is a unique set of 15 digits used on GSM phones to identify them. Since the sim card was more relevant to the user, and could be rearranged from phone to phone, it was necessary to track the devices themselves, and IMEI arose.

If the code obtained by entering this command and the code on the back cover of the phone do not match, then your phone may “Gray”.

FORWARDING CALLS OF Samsung Galaxy Ace II GT-I8160
Deactivate all types of call forwarding ## 002 # @
Deactivate all conditional redirects ## 004 # @
Activate all conditional redirects 004phone_number # @

FORWARDING ALL CALLS Samsung Galaxy Ace II GT-I8160
Deactivate and Disable call forwarding to another number ## 21 # @
Deactivate call forwarding to another number # 21 # @
Set a number and activate call forwarding to another number 21 phone number # @
Activate call forwarding to another number 21 # @
Check the status of call forwarding to another number # 21 # @

FORWARDING IN CASE OF NO RESPONSE TO THE CALL
Activate call forwarding to another number if the subscriber does not answer 61 phone number # @
Deactivate and turn off call forwarding if the subscriber does not answer ## 61 # @
Deactivate call forwarding if the subscriber does not answer # 61 # @
Activate call forwarding if the subscriber does not answer 61 # @
Check call forwarding status if the subscriber does not answer # 61 # @

FORWARDING IN THE CASE IF THE SUBSCRIBER IS OUT OF THE COVERAGE ZONE
Activate call forwarding to another number if the subscriber is out of coverage area 62phone_number # @
Activate call forwarding if the subscriber is out of coverage 62 # @
Deactivate and turn off call forwarding if the subscriber is out of coverage ## 62 # @
Deactivate call forwarding if the subscriber is out of coverage area # 62 # @
Check forwarding status if the subscriber is out of coverage area # 62 # @

FORWARDING IN CASE IF THE PHONE IS EMPLOYED
Activate call forwarding to another number if the phone is busy 67 phone number # @
Activate automatic call forwarding if the phone is busy 67 # @
Deactivate and turn off call forwarding if the phone is busy ## 67 # @
Deactivate call forwarding if the phone is busy # 67 # @
Check the status of automatic forwarding if the phone is busy # 67 # @

SETTING THE NUMBER OF HARNESS BEFORE ACTIVATING A REDIRECTION
N = 5-30 (seconds)
Set the number of beeps 61 Voice Mail Number N # @
Discard previous installation ## 61 # @

BAN ALL ALL OUTGOING CALLS Samsung Galaxy Ace II GT-I8160
Change barring password 03330 oldPasswordPasswordPassword # @
Activate barring of all outgoing calls 33 Password # @
Deactivate barring of all outgoing calls # 33 Password # @
Check the barring status of all outgoing calls # 33 # @

Barring All Calls Samsung Galaxy Ace II GT-I8160
Activate all call barring 330 Password # @
Deactivate barring all calls # 330 Password # @
Check status barring all calls # 330 Password # @

BAN ALL ALL OUTGOING INTERNATIONAL CALLS Samsung Galaxy Ace II GT-I8160
Activate barring of all outgoing international calls 331 Password # @
Deactivate barring of all outgoing international calls # 331 Password # @
Check barring status of all outgoing international calls # 331 # @

BAN ALL ALL OUTGOING CALLS Samsung Galaxy Ace II GT-I8160
Activate barring of all outgoing calls 333 Password # @
Deactivate barring of all outgoing calls # 333 Password # @
Check barring status of all outgoing calls # 333 # @

Barring All Incoming Calls Samsung Galaxy Ace II GT-I8160
Activate barring of all incoming calls 35PW # @ or 353 Password # @
Deactivate barring of all incoming calls # 35PW # @ or 353 Password # @
Check the barring status of all incoming calls # 35 # @ or # 353 # @

Barring All Incoming Calls When Roaming
Activate barring of all incoming calls when roaming 351 Password # @
Deactivate barring of all incoming calls when roaming # 351 Password # @
Check the barring status of all incoming calls when roaming # 351 # @
Activate call waiting 43 # @
Deactivate Call Waiting # 43 ## @
Check Call Waiting Status # 43 # @

SENDING or PROHIBITING SENDING YOUR PHONE NUMBER WHEN CALLING
Deny sending your phone number # 30 # phone number @
Allow sending your phone number 30 # phone number @
Check the status of sending your phone number # 30 #

CODES FOR SENDING / FORBIDDEN DETERMINATION OF NUMBERS FOR INCOMING CALLS
Disable caller ID on your phone 77 #
Allow caller ID display on your phone # 77 # @
Check the caller ID display status on your phone # 77 # @