How to charge iPad if the charger is broken

What to do if iPad won’t charge

When users of modern Apple tablets are faced with the fact that their iPad does not charge, the main thing. do not panic and figure out why this happens and what the problem is.

To see if your iPad is charging, check to see how the battery icon appears. it should have a lightning bolt on it.

No? Then move on to a list of the main causes:

  • Problem with the cord.
  • Adapter defective or outlet problem.
  • Moisture or mechanical damage.
  • Power controller failure.
  • Clogged Port.

Now let’s look at all these factors in detail.

Problems with the cord

First, check your USB cable. Is there any damage? There should be no broken or bent contacts. Important: Your wire must be either original or MFI (Made for iDevices) certified. On the package in which your cord was, there should be such a sign:

The reason is in the adapter or in the socket

The problem may be in a faulty adapter or socket. I once stopped charging my iPad for such a reason. In this case the advice is simple: check the adapter and the socket in operation with other devices, if necessary. replace.

The impact of moisture and mechanical damage

One of the reasons why your iPad won’t charge could be moisture inside your tablet. In this case, I advise to take the “sick” to the professionals, because if you do something wrong, it will only destroy your device.

Mechanical damage is not uncommon on iPads, you only need to drop your device once. Here it is not even necessary to ask what to do if after that iPad does not charge. of course, go to the service.

A problem with the controller

When charging the tablet through a non-certified cable long enough, the power controller can break. If your iPad is still under warranty, consider yourself lucky. If not, you’ll have to pay a lot of money for repairs.

How to Use a Non-Apple Certified Lightning Cable

Starting with iOS 7, the crafty guys from Apple banned the use of unofficial Lightning cables for charging and syncing iPhone, iPad. You will see the following message when you connect it:

The cable or accessory is not certified, so it is not guaranteed to work with this iPhone/iPad.

  • Plug it into the network on the USB / plug side
  • Connect the Lightning cable to your iPhone/iPad
  • See the window pop up to tell you that you are a scoundrel and are using an uncertified cable, click Close
  • Do not turn off your device, unplug the cable from it and connect it back to your iPhone, iPad
  • Press “Close” again, then watch the gadget starts charging.

There is another way around the protection, sometimes in the Cydia repositories there is a jailbreak tweek Unauthorized Lightning Cable Enabler, which solves the problem for some people. The tweak does not have a permanent home.

Top reasons why iPad won’t turn on

As I said, if your iPad does not turn on, you need to diagnose the cause. On this depend on further action.

Some problems can be solved at home, some require a little knowledge and experience with technology, and some can be corrected exclusively in service centers.

The tablet froze

If the tablet computer is frozen and displays a black screen, some might think that it is off. In this situation, it usually helps to hold down the off button, but sometimes it is necessary to perform a forced deactivation.

The method of forced shutdown depends on the model of the device:

  • If it is a device with a “Home” button, then you must hold it and the off button for a few seconds.
  • If it is a model without a home button, you must hold down the volume down and off button for a few seconds.

After that, the Apple logo should be displayed, and then the device can be turned on.

A system issue

Except for the lack of charge and freezing, a system or software problem is the most common. This is especially true for older models.

It can occur for a variety of reasons, and is often Apple’s or the user’s fault.

For example, if your tablet computer stopped turning on after installing the beta version of the new iOS, then you are fully responsible for this failure, because you should have considered all the risks.

Much less often, third-party software is to blame. This is because Apple thoroughly tests all apps that are posted to the App Store before allowing them to exist.

See also  How to activate whatsapp on iPad

In cases where the root of the problem is hidden in the software or operating system, recovery mode on your iPad will help, which can be done in two ways.

Standard switch to recovery mode

This classic method works if you are able to enter recovery mode. If there is no power left at all, then I advise you to switch to the method through third-party software.

  • Hold down the home button (on devices with it) or the power button while connecting the device to your PC.
  • Press and hold the button until the screen displays a symbol of switching to the recovery mode.
  • Open iTunes on your computer.
  • iTunes will analyze your connected gadget and detect the problem. You will be prompted to either update or repair the device. In the second case, all user data not backed up will be deleted. Test the upgrade first.

Activating recovery mode with a third-party program

This method requires you to download and install the program Dr.Fone.

In my opinion, this method is the most effective in case of system/software problems.

Moisture

If moisture gets inside the iPad, it can temporarily or permanently damage internal components.

Naturally, when your device stops turning off after you drop it in water, the cause is definitely moisture, but it is not always so obvious.

In 80% of the cases moisture can get inside by condensing the steam into droplets.

This happens when the gadget is in a room with high humidity, such as a bath. Droplets appear on the internal elements, and if they get on some of the semiconductors or components, the device fails.

What can be done in such a situation? If the device does not shut down by itself, be sure to turn it off. Also put the tablet in dry rice for the whole night, and “with its head”. Rice is very susceptible to moisture.

If your iPad still won’t turn on, it has been severely damaged by moisture. You need to go to a service center to diagnose and solve them.

The screen is broken

It happens that the tablet computer is working fine, but it seems to be turned off, because the display does not show anything.

It’s easy to diagnose a malfunction: just press the power button to unlock the screen, then tap a few times and then press the power button again to lock the display. The iPad will make a trademark click sound if it is in standard mode rather than silent mode.

Broken screen to be fixed only in a qualified service center. If you are offered a non-original display, I advise you to refuse and splurge on the original. Believe me, so you will save money, despite the fact that the original screen is more expensive.

A fake will have to be replaced every few months, and the feeling of using the device will noticeably deteriorate.

Broken power button

If the device is turned off and does not turn on, it is possible that the reason lies in the power button. This means that technically the tablet is fine, but because of the broken button the command to activate the gadget is not detected.

Button rarely breaks by itself, in most cases it happens if the device was dropped or some liquid got inside it. Recall your typical keystroke sensations and compare them to what you are feeling now. Also inspect the button carefully.

The solution to this problem is better to trust an experienced professional. You can disassemble the device at home, but for most users this will lead to new problems and not to fix old ones.

The battery is dead (and there are other mechanical problems)

There is no way to tell if the battery is dead or broken. The same is true of most other mechanical breakdowns, be it damage to the motherboard, torn charging stub, etc.

The only thing that might even hint at a hardware problem is if there has been any physical impact in the recent past. Roughly speaking, if your tablet was dropped on a tile yesterday and today your iPad does not turn on, it is clearly a mechanical failure.

The most common cause

I’ll start with the most frequent, and at the same time the most obvious and easiest in terms of solving the problem.

So, usually the iPad does not turn on due to lack of charge. That is, the battery is simply discharged after being fully discharged.

  • First of all, chargers can break, and they do so without any manifestation, but just stop working. People put their iPad Mini, iPad 2 or other model on the charger, not even paying attention to the absence of the lightning icon on the screen. Then they pick up the device after a few hours and it no longer turns on. If it’s the charger, it’s very easy to tell. Take another charger and connect it to the tablet, or try charging with the same charger another device from Apple, such as iPhone. It will be immediately clear whether the charger is “guilty” or not.
  • Secondly, check whether the socket or extension cord to which the tablet computer is connected works. It is possible that it is the power source that is faulty, not the charger or the iPad. I’m not even talking about checking to see if there’s electricity in the room.
  • Third, make sure that the charging wire connector on the tablet, and the port itself at the end of the USB charging cable, are not clogged. Apple uses materials that are hard to clog, but there are situations where debris literally sticks. For example, if you accidentally spill a sticky liquid on a mobile device or charger, dust and debris will accumulate a lot in a few days. In general, look at both the charging input on the device and the port on the charger wire, and if you find a blockage, fix it.
See also  How to download books to iPad

I’ve broken down all the causes and solutions when an iPad Mini, iPad 2, or other model does not turn on due to lack of power in the battery. Unfortunately, there are other types of problems.

Using a Power Bank

The last option, how to charge the iPad without a charger, will be an external battery Power Bank.

Mobile USB chargers give the necessary force of current and easily charge the tablet with only a wire, and the speed will be the same as from a normal network of 220 volts.

The most popular and reliable are the external batteries of Chinese company Xiaomi. There are models for 5000, 10000, 16000 amperes. In addition to the Power Bank from Xiaomi, there are other options in this segment, which represent a quality and durable product. Everyone will find something for themselves.

How much the portable computer is charged?

Many questions arise about how long it takes to charge the iPad mini. Charging time depends on the connection method. If you do it from the computer, then it will take more than 12 hours to fully charge the battery (reason. low USB current). If you plug into a wall outlet, you can get a fully charged device in 5 hours. If it also charges slowly from the outlet, it may indicate a malfunction.

Now let’s talk about how to charge the iPad-mini correctly. Recommendations here are almost the same as with other electronics that use lithium batteries. At the beginning of operation it is necessary to fully discharge the gadget and fully discharge it at least 3 times. Such a procedure allows you to “discharge the battery and increase its life).

Reasons why iPad may not charge

There are a lot of reasons why iPad may not charge. Among the most popular problems with charging should be highlighted such as:

  • Technical malfunction of the charger. sometimes the problem that does not charge iPad, is that the charger is simply broken. Yes, it is unpleasant, but there is nothing fatal about it. The main thing is that the device is working properly. It is enough to buy the charger and the problem will be solved.
  • First, if your device is wet, this may be the primary cause of the iPad not charging. To fix the problem it is enough to clean the charger. You can do it yourself or with the help of specialists. It is enough to take the device to the nearest service center and the problem will be solved.
  • Using a “non-native” charger. charging your iPad with a non-original charger can cause the iPad to break the power controller. This is quite a serious problem. If your iPad is under warranty, this is exactly the case when it should be used. In any case you should apply to the professionals.
  • Charging plug does not work. an unpleasant breakage that you can not fix by yourself. For what reason the connection plug is broken it is difficult to determine “by eye”. If your charger‘s functioning is questionable, it’s best to contact a service center.
  • Mechanical damage to the iPad or charger. caused by the user himself a lot of troubles with the gadget can happen with charging. It’s enough to drop your iPad or let the charger play with the cat and you will have charging problems. Fixing this problem with their own hands is a task with an asterisk for most users. To avoid such troubles, it is necessary to treat things carefully and with care.

Most of the charging problems with iPad can only be solved by the specialists of the service center, but there are other alternative ways to charge your gadget.

The reasons why the iPad does not charge

There are several different reasons why the iPad does not charge. In most situations you can fix the problem at home after determining the cause.

That’s why the most common causes of charging problems with Apple tablets are described below.

Simply slow charging

The main reason why your tablet takes a long time to charge is the insufficient amount of energy. What can cause this kind of thing?

First, the charging cable may be damaged. With twists or minor damage, the wire will still transmit power, but not fully.

In other words, the cable’s bandwidth will be degraded, making the charging process much slower.

Secondly, it can be about the power source. For example, when charging through a computer USB port or a damaged power adapter, a small amount of power is delivered to the cable.

See also  How to update Skype on iPad

The adapter

The problem may be in the adapter to the outlet. If it is out of order, there will be no charging process.

Apple has pretty good quality original adapters, but even they can fail over time or due to physical damage.

You will need to buy a new adapter, preferably from Apple Store or an authorized store.

To check if the problem is in the adapter, you can connect the tablet to your computer. If it is charging (usually iPad is slow to charge through a PC), but not through the adapter, then it is definitely the culprit.

You can also use a different power adapter, if you have one (for example, from an iPhone).

USB cable

Often the iPad does not charge because of a damaged USB cable. This is not uncommon on Apple devices, especially close to the input of the wire in the tablet.

What to do? First, I recommend checking to see if the cable is “guilty”. The easiest way to do this is to use a different cable, or try charging a different device with this cable.

If it’s the wire, just buy a new. You can open up a broken one and rewire it as needed, but only if you know what you are doing.

Connector

The charging jack on your tablet may be broken due to careless use, and it may also be clogged. The second reason is much more common than the first one.

Because the connector is a small hole, debris collects in it. Clean the debris with a toothpick with tightly wound absorbent cotton.

Broken connector must be replaced. I do not recommend doing this at home.

Strong discharge

In rare cases, the iPad might stop charging due to severe discharge. It happens when a mobile device is actively used, turned off because of low charge, and then turned on again and not charged.

The “cure” of a strong discharge is very simple. Connect the device to a working charger for several hours or better yet overnight. Then disconnect it from the charger and turn it back on.

Important! Severe discharge significantly damages the battery. Do not charge your iPad too often or it will not last.

Power source

Power supply can be understood as:

The fault in the adapter was explained above.

The outlet may be functioning either erratically or not at all. There is no need to check it. It is enough to simply plug the charger with the tablet to the outlet in another room.

If the USB port does not charge the device at all, then this USB may not be designed for charging. Usually such interferences are encountered on small laptops.

System failure

The iOS operating system very rarely has system failures, so when they occur, it is quite problematic to understand exactly what the problem is.

The only thing I can recommend for system faults in general, without looking at each fault individually, is to reboot the machine. It is not possible when the device is charging, but not turning on.

If this does not help, I advise to reset the device to the factory settings. Keep in mind that in this case all user data will be deleted.

The firmware is broken

Sometimes the system part is subjected to too serious errors, which causes the iPad to charge only when turned off, or reboots on its own.

Only reinstalling the operating system will help. It is better to go to a service center with this issue, and besides, in Apple-centers employees will do it for free.

Hardware glitch

A hardware problem always appears due to careless use. If the device has been dropped, you can see the damage on the body, for example, rips. But the damage is not always visible externally. Sometimes the hardware components are badly damaged, but on the outside the tablet is like new.

You need to go to the service center, to order the diagnosis and replacement of components.

Why won’t your iPad charge via computer

Why won’t your iPad charge from your PC, and what to do if the status bar shows “No Charge”?? This is the same problem.

The fact that this inscription appears only when the tablet computer has detected a connected charger, but it does not have enough power to receive energy. Accordingly, because of this iPad does not charge.

About the author of this site

Hi. My name is Peter. I’m the author of this website. In it I talk about what I am very interested in. Specifically about tablets. In the blog I try to tell in simple language about the firmware, settings and innovations of all modern tablets. Also, most of the articles are about the Android OS, which I really like

Denial of responsibility | Contacts |RSS | SE | EN | BR | DE