How To Charge A Kids Smart Watch

How to properly charge a smart watch so that the battery lasts longer

The network has a lot of conflicting information, so let’s finally figure out how to properly charge a smart watch.

The smartwatch IWO 2, GT-08, Q-50 and Q-90 comes with a USB cable for charging.

Accordingly, they should be charged from a computer or laptop, where there is a suitable stable voltage. You can use Powerbank. The charge power should not exceed 2 amperes, problems with the battery may occur.

The first charge of a smart watch: what to do to preserve the battery

In a smart watch, a lithium-ion battery and charging rules are similar for most devices with a Li-ion battery: we completely discharge and charge the watch 2-3 times to boost the battery.

To charge, insert the USB cable into the connector in the watch, then the opposite end into the USB output on a PC or laptop. The first charge lasts about 2 hours, but no more than 3.

After several cycles of full discharge and charging, the smart watch can be charged at your convenience. They charge pretty quickly:

  • Smart watch IWO 2 –40 min.;
  • GT-08. 25-30 min.;
  • Children’s smart watch Q-50 and Q-90. about 50 minutes.

In 60 minutes You are guaranteed to charge the watch.

Remember: you should not leave the gadget plugged into the network after a full battery charge (the recommendation does not apply to the “swing” time).

How long does the battery last in a smart watch

With fairly active use, the battery lasts for 2-3 days. Pay attention, the GPS “eats” the most energy. If the setting "update every minute" is set in the location update settings, the battery will drain quickly. We recommend setting the mode “every 10 minutes” to save battery consumption.

Still smart watches are quickly discharged from the frequent exchange of SMS and voice messages. At a minimum, you can disconnect the reception of messages from the mobile operator.

Useful tips for charging smart children’s watches | MYKID

In this article we want to tell you about the features of charging smart children’s watches (smart baby watch Q50, Q60s, Q80, Q90 (Q100)).

Some sellers claim that the watch cannot be charged from a computer, as this will lead to a malfunction of the software and the only way to repair them is to contact the manufacturer. In fact, in children’s smart watches (at least ours), the kit comes with a 1-way cable, it is intended only for charging, not for data exchange, which means that the PC can not affect the operation of the watch, and you can charge our watch is from a computer.

Nevertheless, it is recommended to charge the watch in the mode of “gentle” charging (from a PC, laptop or charger with a capacity of not more than 1 amp.) If you charge the watch with a charge of higher power, the battery will quickly fail. The new watch should be completely discharged and charged at least 5-10 times in a row in order for the battery to gain its power. Along with this, you should not allow a complete discharge of the battery, because if the battery of the watch is completely discharged and turns off, then it may not be possible to charge the watch from a PC or laptop. In some cases, the watch’s battery needs to be started by a larger charger. We recommend connecting the watch with its native cable through an adapter with a capacity of 1-2 amp. to a network or a power bank, so that the watch starts to charge, and then reconnect it to a PC or laptop. To start, you can also use a charger with a capacity of 1-2 amp., But pay attention to the length of the micro-usb, some charges have a short micro-usb output and the watch does not accept it.

Video: How To Charge A Kids Smart Watch


If you have complied with the above recommendations and the watch is not charging, then it is necessary to exclude damage to the native cable, so try different chargers. Leave the watch on charge for 10-20 minutes, as a rule, they need time to start taking charge.

It should also be remembered that when the watch is discharged, it turns off, maintaining a small charge, which is enough to respond to charging and start charging itself. This is important to explain to the children so that they do not try to turn on the clock again, otherwise the battery will be discharged to such an extent that it will need to be charged forcibly (in the service center). There are no specialized service centers for repairing children’s smart watches, but you can contact any service center for repairing electronics.

Handle your watch carefully and use it with pleasure!

How to charge a smart watch

In a smart watch, the lithium-ion battery and charging rules are the same as for most devices with a Li-ion battery: fully charge 2-3 times (2-3 hours) and discharge the clock to build up the battery. The charge power should not exceed 2 Amperes, otherwise in the future there may be problems with the battery. To charge, insert the USB cable into the connector in the watch, or connect the magnetic cable (some models use magnetic charging instead of USB) from your kit, and the opposite end into the USB output of a PC, laptop or charger. The first charge lasts about 2-3 hours. After several cycles of complete discharge and charging, the smart watch can be charged as needed.

Important: you can’t leave the device plugged in after a full battery charge (the recommendation does not apply to the “swing” time of the battery).

How long does the battery last in a smart watch

With the active use of the battery charge on average lasts for 2-3 days. Please note that GPS consumes the most energy. If the location update settings are set to "every minute", then the battery will drain faster. To save battery consumption, we recommend setting the mode “every 10 minutes”.

How To Charge A Kids Smart Watch

Also, smart watches are quickly discharged from frequent and long calls, voice messaging and SMS.

How to charge smart children’s watches?

How to charge the Smart baby watch so that the battery holds for a long time?

There are several possible reasons why a smartwatch runs out of battery quickly.

1. It is necessary to leave the watch charged from the outlet for no more than 2 hours. If you leave the watch to charge all night (and this at first glance seems very convenient), then this will negatively affect the operation of the battery in the future.

2. It is best to charge the watch with high-quality original chargers from phones.

3. Do not let the watch completely discharge in the first 2-3 months. their use.

4. An incorrectly selected tariff with extra settings can also affect the fast discharge of the battery. These can be various additional options: notifications of call forwarding, missed calls, etc., who constantly want to arrive at the watch, but the watch is not ready to receive it, because not intended for this.

5. The watch can discharge faster if it is on or near the electronic device. For example, with a microwave, in the refrigerator, etc.

6. Watches can quickly discharge if water or sand enters their case. Remember that the watch is not waterproof.

7. The watch may not hold a charge in case of mechanical damage.