Changing the Password on Zyxel Keenetic WI-FI Router. How to set a default password using My.Keenetic.Net?
In this article let’s find out how to change the default password on Zyxel Keenetic WI-FI router and set your own password. The default password for the control panel is my.keenetic.net (192.168.1.1) has the form “Admin”. Also talk about different options to change and restore forgotten password and username on your Zyxel Keenetic router or reset it to factory settings in case you forgot or lost it. Instructions are universal for any Zixel Kinetic model. Lite, Start, 4G, Ultra, Giga, Omni
Despite the rather high cost, routers Zyxel Keenetic are a great success, not so much because of their technical characteristics, but because of the reliability in use and stability of Wi-Fi connection. However, even with them arise difficulties, which are often associated not with the device itself, but with the forgetfulness of the user.
For example, if you have forgotten the password and login to the administrator section of the router my.keenetic.net. The most radical solution is not to try to change and set your own, but to reset the password completely to restore the default one. For this purpose, you simply need to use the “Reset” button on the router case. It should be pressed and held for about 10 seconds. After resetting your Zyxel Keenetic will go back to factory settings.
But it should be noted that with this solution will be lost absolutely all configurations, and you will have to reconnect it as if you have just brought it from the store.
Change the password on Wi-Fi on the router D-Link DIR
To change the wireless network password on Wi-Fi routers D-Link (DIR-300 NRU, DIR-615, DIR-620, DIR-320 and others), start any browser on the device that’s connected to the router. it doesn’t matter if it’s via Wi-Fi or just a cable (though cable is better, especially if you need to change the password because you don’t know it yourself. Next, perform the following steps:
- Enter 192.168.0.1
- When prompted for login and password, enter the standard admin and admin or, if you changed your password to enter the router settings, enter your password. Note: this is not the password required for Wi-Fi connection, although in theory they may be the same.
- Next, depending on the router firmware version, you need to find the item: “Manual Setup”, “Advanced Settings”, “Manual Setup”.
- Select the “Wireless Network” item, and in it the security settings.
- Change the password to Wi-Fi, you do not need to know your old password. If you are using the WPA2/PSK authentication method, the password must be at least 8 characters long.
- Save your settings.
That’s all, the password is changed. You may need to “forget” the network on devices that have connected to the same network before to connect with the new password.
How to restore password from Zyxel Keenetic router?
If you vitally need to save all your wireless network settings, then there are several ways to find out and restore the router’s admin password. First of all try to use the default login and password, which are indicated on the sticker on the case. As a rule, in older Zyxel Keenetic routers the password is “Admin”, and the password is “1234”.
However, newer versions do not have this information on the sticker
The point is that in this case only WI-FI connection is protected, and for security reasons the password was changed forcibly during the first connection, and you will not be able to recover it this way.
The only way out in this case is a complete reset.
How to change the default password on the router Zixel Kinetic?
If you haven’t lost or forgotten anything, but just want to change the default password to log in to your router, you need to first log in at 192.168.1.1 or my.keenetic.net. As nowadays there are two versions of admin area and it is possible to change the password via smartphone, let’s consider each case separately.
Owners of Zyxel Keenetic routers with old software have to go to “Settings. Users”. Here we already have an administrator account called “admin. You can click on it and change the existing password.
You can also create a new administrator and assign him or her the rights to work with this or that partition. and you will have two or more with different access levels.
How to change the password on your Zyxel Keenetic router
The most convenient way to use the Internet is wireless mode. It may not always be stable, but it is a well-deserved first place in terms of convenience. Wireless Internet is provided by routers. They divide one Internet access into dozens or even hundreds of channels.
One of such routers is Zyxel Keenetic 4G. Zyxel has gained a lot of popularity, gained recognition in the market. They have routers in a variety of price ranges that many people may like.
Sometimes it happens when you just put a new WI-FI key on the router Zyxel, went to a cafe or to work, come home, try to connect, but the router does not reciprocate. In this case there are two ways to proceed:
Trying to change a forgotten or lost password.
Since we can not help you with the first option, let’s consider the second case. So, how to change the password on the router Zyxel Keenetic.
In case you only forgot your WI-FI password, you can use one trick. Connect your PC to the router directly through the LAN cable. Now you can enter the router’s admin panel.
Go to 192.168.1.1 or 192.168.0.1. It is done in your web browser. Next, enter your login and password. If you have not changed it, then by standard it is “admin” is both the login and the key. Or maybe “admin” is your login, but “1234” is Zyxel Keenetic’s default password.
Go to “Wi-Fi Network”, look for “Key” in one of the items, it is the password. Here you can either know it, or change it. Before you change the password on your WI-FI router, write it down somewhere. Change it to something you can remember.
from the router’s admin panel. Then before you go to the router settings you have to reset everything, otherwise you will not be able to change the password on your Zyxel Keenetic router. Using a thin object we press on the hole that is located on the back panel. Hold down the button for 10 seconds. So we reset the settings to the factory defaults.
Now you have to configure your router again, but you have access to the admin panel. Login and password are now the factory defaults. The configuration of the router itself from scratch has been considered in other articles. Now let’s look at the process of setting a password on WI-Fi and how to change it.
Go to our admin panel at 192.168.1.1 to change the key. Enter your login and password to log in. There is a list on the left, select there the network “Wi-Fi”, and after “Security”. In the field “Network Key” you must put the password that you will not forget)). It must be more than 8 characters long. Authentication must be WPA2-PSK compliant. Press “Apply”.
Because of what may not fit the key, if you are sure you have not forgotten it? This rarely happens, but it is quite possible hacking. Some crackers are able to crash your network all the time, just by connecting to it once. This is done through WPS. That is why we advise you to disable this feature on your routers. The problem may be also in the firmware, if it is damaged, for example. Then you need to reset it to the default settings. And after that you need to reflash your device.
Now you know how to change your password. It is better not to go back to such procedures, always write it down in some notebook. Better yet, if it’s some kind of small tableau, so you don’t have to dictate it to your guests every time.
Keenetic 4G Generation III. Multifunctional Internet Center
There is no need to do any special final manipulations after changing the password on Zyxel Keenetic. To make sure that everything works properly, the user only needs to:
- Reboot the router.
- In the case of changing the wireless network key, reconnect the devices that use it, as the connection to the router will be lost.
Besides, the “user” should write down the new key and keep it in a safe place to avoid resetting the device in case of its loss.
Procedure for changing the password
To change the access code on your ZyXEL Wi-Fi router, you must perform the following actions in sequence:
- Open any Internet browser on your computer and type “192.168.1.1”;
- Click “Enter”;
- Then in the window that appears enter “admin” in the login field and “1234” in the password item or if the user has previously entered his own name and code, then enter them;
Possible problems and their solutions
Zyxel routers are categorized as networking equipment with easy setup and management. But sometimes the owners of these devices have trouble logging into the administration panel.
Incorrect login or password
In the case of this problem it is worth:
- Study the information label on the router’s bottom panel and check the password and login information.
- Check the keyboard layout you are using.
- Make sure Caps Lock is turned on.
If this does not help, you will need to perform a factory reset.
Reset to factory settings
To proceed to the initial configuration of the settings you need to perform a hardware reset according to this scheme:
- On the back of the router, find the Reset button recessed into the case.
- Using a thin object, press this button.
- Hold the button down for 15 seconds.
After rebooting, the router will return to its original operating parameters. Resetting will allow you to use the default authorization data while accessing the web-menu of the device. This method allows the device to “forget” all the changes made to the settings, so the owner will have to re-enter the admin and configure the equipment.
When it’s needed
The expediency of a periodic key change on Zyxel is obvious and does not require justification. Situations when it is necessary to change it are different. The main reasons for this procedure are:
- Initial configuration of the new device;
- configuring a used router for the new LAN;
- password loss;
- compromise the key, or arise suspicion or certainty that it has become known to third parties;
- the use of the same keyword over a long period of time, which provokes the suspicions described above.
Periodic change of access parameters to the router Zyxel contributes to reliable protection of the LAN from unauthorized intrusion, possible illegal actions of intruders in the hacked network.