Hard Reset Iphone X
How to hard reset iPhone 8 and iPhone X
Apple, with the release of the iPhone 8 and iPhone X, completely changed the combination of buttons to force restart these devices. Now, in order to make a Hard Reset, you need to use as many as three buttons, and even press them in a certain sequence. Are you ready to stretch your fingers? Go!
So, hard rebooting the iPhone 8 and iPhone X is done like this:
Press and release the volume up button.
- Press and release the volume down button.
- Press and hold the side (power) button until the Apple logo appears on the screen.
Please note that everything needs to be done quickly enough. Pressed released, pressed released, squeezed and held.
How to Hard Reset iPhone 7
Apple added a lot to the iPhone 7, but also removed a lot. In particular, the Home key has ceased to be mechanical and, most likely, it will now be in all new models. So the old way, pressing the home button does not work (there is nothing to press). How to hard reset iPhone now?
- The device must be turned on.
- Simultaneously hold down and hold two buttons Power (on) and Volume down.
- Continue to hold both keys until the screen turns black and then the Apple logo appears.
- Letting go of the buttons.
Thus, all manipulations are practically the same as in the old models, except that now instead of the Home key, the volume down button is used.
. How to Hard Reset iPhone XS, XS Max and XR? Instructions!
This time, Apple did not invent anything for the hard reset buttons for the new 2018 iPhones, they remained exactly the same as in the iPhone X.
Your iPhone is frozen, you can not scroll through this article a little higher and see how the Hard Reset is done? Nothing wrong! I can tell you one more time. It’s not hard for me.
So, the instruction. Force and Hard Restart iPhone XS, iPhone XS Max, and iPhone XR:
Press and release Volume up.
- Immediately press and release Volume Down.
- Immediately press and hold the Power button until the apple appears (it will take about 10 seconds).
Again, all actions are completely identical to the iPhone X (see the picture just above).
Standard hard reboot of iOS device
Why is the word standard in the title? Because before the release of the seventh iPhone, all iOS devices had these two mechanical buttons. So if your gadget is less than seven, then here’s a way to force restart it:
- Iphone or iPad must be turned on.
- Simultaneously, we hold down two Home buttons (round under the screen) Power (on and off).
- Without releasing them, we wait until the iPhone or iPad turns off.
- We continue to hold them until the screen lights up.
How to hard reset iPhone and iPad with buttons all models!
Hello! In many articles I write that in order to solve some problems (and just for prevention) of the iOS operating system, it is necessary to perform a hard reboot of the device. Over, from article to article, I constantly briefly describe how to do this. To be honest, I’m sick of it. How long can you write the same thing??
Therefore, a strategic decision was made to write a detailed instruction once on how to perform a hard reset (Hard Reset, as some call it) iPhone and iPad, and then just give a link to it. In my opinion, this is just a brilliant line of thought, because it is almost impossible to think of something like this! I don’t know how I did it 🙂 Okay, enough joke, let’s get down to the main thing.
So, a hard reset is a forced reboot, which may be necessary in the following cases:
- The device is frozen, slows down and works slowly.
- Any errors take off.
- Problems with wireless networks, keyboards, programs, applications, etc.
I draw your attention to the fact that such a procedure does not affect any user data, all information will remain in its place, nothing will be deleted. If the goal that you are pursuing by doing a hard reboot is to erase everything from the iPhone or iPad, then you need to perform a slightly different operation, namely, a full reset of settings and content in more detail here.
How to restart or shutdown iPhone 11, X and Xs. All ways
After buying a new iPhone 11 or iPhone 11 Pro, many users are wondering how to turn off or restart this smartphone. This information will be especially relevant for those who purchase an Apple smartphone for the first time or are switching from an iPhone 8 or older devices.
The methods for rebooting and shutting down these models are slightly different.
# 128205; thank re: Store for helpful information. # 128076;
How to turn off iPhone 11
Holding down the power button on the iPhone X and newer devices, which is common in previous models, does not bring up the shutdown menu. Instead, the Siri voice assistant will be activated.
If you turn off Siri or turn off activation by pressing the side button, then a long press on it will not work at all. You need to turn off your iPhone in one of the following ways:
1. Shutdown via settings
The shutdown button for this case has long been hidden in the bowels of the system.
Go to Settings General and at the very bottom of the page we see the Disable button. After pressing, the usual slider appears, one swipe and the smartphone turns off.
When it helps: when you need to turn off your smartphone for a while so that it does not lose battery power.
2. Shutdown via the emergency call menu
Holding down the power button and any of the volume keys on iPhone with Face ID brings up the emergency call menu. So you can call the rescue service without unlocking your smartphone, look at the owner’s medical record and, of course, restart your iPhone.
When it helps: when to turn off iPhone even without entering an unlock password or face scan.
How to restart iPhone 11
There are three ways to reboot:
1. Switching off and on
Just hold down any volume button paired with the side button on the opposite side of the smartphone until the shutdown slider appears, move the slider and wait for the iPhone to turn off. After disconnecting, press the power button to re-enable.
When it helps: this method is useful if the iPhone starts to glitch, some application does not start, or Bluetooth headphones are not connected. The first and most effective remedy for such failures is to turn off and then turn on the smartphone again.
2. Hard reset
Such a reset also helps to get rid of all kinds of glitches and problems with the iPhone. It can be performed both on a working smartphone and when it freezes.
If the gadget does not respond or just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.
When it helps: This is the only way that helps when iPhone freezes. You can use it to combat glitches and system malfunctions.
3. Dedicated button for reboot
Using the AssistiveTouch menu, you can create a virtual button to restart your smartphone.
Go to Settings Accessibility AssistiveTouch and activate the main switch. Now add the Restart button to the menu.
You can add it to the top-level menu, set restart for a long press or double tap.
When it helps: this feature is convenient to use if you want to operate your smartphone with one hand. Add volume control buttons, shutdown buttons and others to this menu, after that you can perform manipulations without pressing physical keys.
How to reset the lock code on Nokia X Dual Sim and similar phones. Hard reset Nokia X, reset phone to factory settings.
Attention. Everything that you do with your phone, you do voluntarily at your own peril and risk! The site administration is not responsible in the event of a malfunction of your phone. If you have a new phone that is under warranty, or if you are afraid that your phone may deteriorate by using this method of resetting the lock code on Nokia X Dual Sim, then you can contact the service center. Good luck.
If you forgot the lock code on your Nokia X, then you can make a Hard Reset that will restore factory settings on the phone and delete all installed passwords and security lock codes.
I would like to warn you that by doing a hard reset on Nokia X Dual Sim you will lose all data that is in the phone’s memory, including contacts, files, messages, games, applications and all other information. After a hard reset, your phone will be like new without passwords and security codes. Perhaps the described method of hard reset Nokia X will work for other Nokia phones running on Android.
Now let’s move on to the process of resetting the forgotten lock code, to reset Nokia X Dual Sim, try the following steps:
Attention again. This reset method removes all personal data from the phone’s memory, including applications, contacts, and restores factory settings.
1) Turn off your phone and unplug the charger.
2) Press and hold the volume up key.
3) Press and hold the power key for about 1 second.
4) When the phone vibrates, release the power key, but continue to hold the volume up key until the phone restarts completely. This procedure will boot the phone into recovery mode.
5) Use the volume up and down keys to navigate through the menu to wipe data / reset.
6) Press the power key to activate this function and perform a factory reset.
Information about factory reset on Nokia X Dual Sim is found at the office. Nokia website www.Nokia. Com / ru-ru / support / product / nokia-x
How to Hard Reset on any iPhone model
The so-called Hard Reset should only be done in extreme cases. This type of device reboot is used if the smartphone stops responding to user actions and hangs corny.
In all other cases, you should carry out the standard shutdown of the device by holding down the Power button (Side button).
Hard reset allows you to reboot the iPhone, but different models do it in different ways.
Iphone 6s, iPhone 6s Plus and earlier
In all iPhone models, from the very first to devices released in spring 2016 (iPhone SE) inclusive, Hard reset is carried out in the same way.
To reset, you need to hold down the Home button and the Power key until the Apple logo appears.
This reboot method works on all iPad and iPod Touch models.
Thanks to re: Store for the helpful advice.
- Share this
Iphone 7 and iPhone 7 Plus
These devices use a slightly different reboot method. For this, for the first time, it was not necessary to use the Home button under the display.
Recall that since the iPhone 7, this key has ceased to be a physical button and is a touch button, and the Taptic Engine mechanism works out the feedback after pressing.
In the event of a freeze, the touch button will not respond to user actions.
So to implement a Hard Reset, you need to hold down the volume down and Power buttons until the Apple logo appears.
Iphone X, iPhone 8 and iPhone 8 Plus
In the latest generation of smartphones, Apple has changed the way the device quickly restarts. Now for this you need:
1. Press and release the volume up button.
2. Press and release the volume down button.
3. Press and hold the side button until the Apple logo appears.
You need to do this fairly quickly with a minimum delay between clicks.
I love technology and everything connected with it. I believe that the greatest discoveries of humanity are yet to come!
Factory data reset and memory card
.Gif “/ When performing a hard reset, you need to know that the contents of the memory card does not change. If you need to delete information from it, you will have to delete it manually. Over, if you delete it using the button “Dellete”, the data is still subject to recovery, this method is not suitable for deleting confidential information.
Hard reset what it is and why
This is the name of a full factory reset. If the smartphone begins to malfunction, freezes, then it is recommended to perform this simple action. There are three ways to do this.
Reset Android via code
In the number entry section, dial as follows: 27673855 #. All original Android data on the Chinese smartphone and tablet will be fully restored. No additional confirmation is required to reset via code.
How to Hard Reset on Android Device
.Gif “/ Freezing and incorrect operation of smartphones and tablets based on Android is a very common problem. Many do not know how to proceed and take the gadget to a service center for repair. Meanwhile, in most cases, this can be done by a simple data reset, or Hard Reset. As a result of these actions, all settings can be restored to their original factory settings.At the same time, all information that is in the phone will be deleted: contacts, messages, applications, etc.
Hard reset what it is and why
- The first way is software
- Reset Android via code
- How to reset Android settings if your smartphone won’t turn on
- How to hard reset if an alternative Android firmware is installed on the tablet
- Factory data reset and memory card
- Through the recovery menu
- By computer
How to reset Android settings if your smartphone won’t turn on
.Gif “/ After the hard reset has been carried out, it will be possible to restore Android using a backup copy. Doing this, you need to be extremely careful: it is quite possible that the problems arose by accident, based on the previous settings or in some of the installed applications.
In this case, it is better not to risk your Chinese tablet, but set it up as a new one through your Google account. Thanks to this, all the necessary information messages, letters, contacts are synchronized with a smartphone. Applications that will be erased can be installed again via PlayMarket after Android is restored.
Through the recovery menu
.Gif “/ One of the known methods of performing a hard reset is through the recovery menu. This method is effective if the device cannot be loaded and the hard reset cannot be started using the settings. In this situation, we proceed as follows:
Turn off the tablet completely, including rebooting the battery by removing it and reinstalling it;
- Hold down the volume key, hold;
- Press the key “Home”, we hold;
- Hold down the power key, hold all the above keys and wait for the Android recovery mode to start;
- The recovery menu will appear in the window, from which we select “Wipe Data / Factory Reset”;
- We are waiting for a full recovery.
How to Hard Reset Nokia Phone to Factory Settings
If your phone or Nokia smartphone starts to drizzle, slow down, forget the security code, then in order to somehow fix it, you can try to do a factory reset of the Nokia hard reset. After you reset the phone to factory settings using one of the following methods, everything in the phone’s memory will be deleted including codes, contacts, messages, installed themes,,, call logs, etc. The phone will become what it was when you bought it, so it is recommended to save all the necessary information and files in advance.
Attention! Everything that you do with your phone you do voluntarily at your own peril and risk! You are responsible for your phone in case of problems.!
Now let’s see how to reset a Nokia phone to factory settings. To get started, remove the memory card from the phone and save all the necessary information, files, contacts, after which you can proceed to a complete reset.
Hard Reset Nokia the first way for phones and smartphones enter the reset code on the phone with the command # 7370 #. Full reset may require security code, Nokia factory code 12345 if you haven’t changed it. If the factory code does not fit, then it was changed earlier, you can view the forgotten security code with the mynokiatool_111 program by clicking on this link.
Hard Reset Nokia the second method is only for Nokia smartphones, turn off smart and hold down at the same time: green call button, asterisk, key 3, and on and off button smartphone and without releasing hold for a few seconds until the Nokia screensaver appears. The result of such an operation will be the same as in the first method, look at the screenshot attached below for an example on Nokia N82. I myself personally checked the work of both examples, there were no problems.
After a factory reset, your phone is as good as new and in most cases should help you troubleshoot problems.
Here’s another way to do a factory reset (Hard Reset) on Nokia touchscreen smartphones by pressing 4 function buttons. Turn off the smartphone and proceed to reset, press volume down button, camera button, menu button and power button, keep all four buttons pressed until the Nokia logo appears on the smartphone display.
All Nokia phone codes are secret and unclassified. If, after all, your Nokia phone is still buggy, then try to flash it, how to flash a phone from the official Nokia website, see the link to update the Nokia phone software
After resetting the phone, you will need to customize everything for yourself in a new way, install applications, save contacts and everything that was on it earlier.
How to Factory Reset iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max via Factory Reset
This procedure is the same as for all other iPhone models. We described in detail how to reset iPhone settings in this article.
If you have difficulty booting the system, use the restore procedure in iTunes on your computer. Macos 10.15 Catalina and later uses the Finder app instead of iTunes (detail).
Keep in mind that after a factory reset or software restore on your computer, all data stored on your device will disappear, so use this method only if absolutely necessary. However, if you have backups of your files on your computer or iCloud, after restoring the software, you can easily restore them.
Hard reset iPhone 8, iPhone 10, iPhone XS, iPhone XR and iPhone 11 (hard reset) and enter DFU mode: how to
Need to hard reset (hard reset) your iPhone, but the old-fashioned method doesn’t work? You probably didn’t know, but the procedure for how to force restart or hard restart in iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XR, iPhone 11, and iPhone 11 Pro has changed.
Recall that to restart the iPhone 7 and iPhone 7 Plus, you need to simultaneously press and hold the power and volume down buttons for at least 10 seconds until the Apple logo appears. With iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max, the reboot procedure is a three-step process.
Cupertinos have changed the restart process because, in newer iPhones, pressing and holding the Power and Volume Down buttons at the same time activates the SOS Emergency Call feature. Note that in iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max, the power button is now called the side button.
How to enable DFU recovery mode on iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max (if system won’t start)
In case iPhone cannot boot in normal mode, use DFU recovery.
1. Connect your iPhone with a cable to a computer with iTunes installed. Macos 10.15 Catalina and later uses the Finder app instead of iTunes (detail).
2. Launch iTunes (Finder) on your computer.
3. On iPhone, press and quickly release the volume up button.
4. Press and quickly release the volume down button.
5. Press and hold the side button until the iPhone turns off.
6. After turning off the iPhone, while continuing to hold the power button, press and hold the volume down button for 5 seconds.
7. After 5 seconds have passed, release the power button, but continue to hold the volume down button until iTunes displays a message stating that the iPhone is in recovery mode (about 10 seconds).
When using the Finder (macOS 10.15 Catalina and later software versions), you must click on the device name in the side menu.
How to Activate Recovery Mode on iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max
1. Make sure you have the latest version of iTunes installed on your Windows PC or Mac (download here). Macos 10.15 Catalina and later uses the Finder app instead of iTunes (detail).
2. Connect iPhone to computer and open iTunes. On macOS 10.15 Catalina and later, launch the Finder app.
3. After connecting iPhone to computer, perform a forced restart.
Press and hold the side button until the recovery screen appears.
Iphone screen in recovery mode on iOS 13 and newer:
Iphone screen in recovery mode on iOS 12 and earlier:
A menu appears in iTunes (or Finder depending on the OS), prompting you to either restore or update your iPhone. Select Refresh and iTunes (Finder) will try to reinstall iOS while keeping data, or Restore iPhone to factory reset (all data will be deleted).
Iphone may reboot automatically several times during the update or restore process. Do not panic, wait until the download is complete (usually 5-15 minutes).
After completing the restore or update process, set up your iPhone.
If you turned on Recovery Mode by mistake and not Updates, don’t worry. Just unplug your iPhone from your computer and press the side button to restart. Recovery mode will be disabled without the need to repair or update the device.
How to turn off iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max without using buttons
In order to turn off the device, you need to press and hold the volume up button together with the side button for a few seconds until screens with sliders appear.
In addition, in iOS 11 and newer versions of the software, the Turn off option also appeared in the Settings application (at the very bottom of the General section).
How to Force Restart or Hard Reset iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max
1. Press and quickly release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the side button until the Apple logo appears.http://www.Iphones.ru/iNotes/vse-sposoby-perezagruzki-i-vyklyucheniya-iphone-11-10-12-2019