Find Airpods via iPhone

Cheap Chinese knockoffs refuse to work

The phone can see the headset, but recognize them as two different devices. Sound quality issues very often occur, or the iPhone does not pair with the Chinese counterfeit at all.

  • First, you need to connect the headphones to each other (each model has its own instructions. read the manual), and only after that to the smartphone.
  • Reboot both devices.
  • Reset Bluetooth settings.

Not determined

Sometimes Airpods, Freebuds, Mi AirDots or other branded headphones are not detected by the iPhone.

In this case, we follow the step-by-step instructions:

  • Check if Bluetooth has turned on on iPhone.
  • Restart the wireless system. turn off and then turn on the “plugs”.
  • Make sure the headset is well charged.
  • Check the compatibility of your phone and headset. In some cases (on new models of Airpods), to connect a wireless device, the operating system must be at least iOs 7.
  • Make sure that there are no devices nearby that can intercept the signal. laptop, MacBook, candy bar, other smartphone with synchronization enabled.
  • In rare cases, powerful Wi-Fi routers can interfere with connections. move to a safe distance (5-10 meters).

Doesn’t connect

The device may appear in the list of connections, but not connect. An error may appear on the display or the connection may take too long. more than 1-2 minutes. Then it is necessary:

  • Remove all devices from the “My devices” list that are no longer in use. click on the exclamation mark on the right and tap on “Forget this device”
  • Restart wireless headphones and turn off / turn on Bluetooth on smartphone.

find, airpods, iphone

Possible difficulties

Even though the wireless device is comfortable to use, connection problems may occur. It is important to note that there are almost no difficulties with the original Airpods headset, but it will be useful to know the solution to standard problems.

3 ways to connect any wireless earbuds to iPhone

Airpods and lesser-known plugs are only gaining popularity with the development of streaming and music services. But sometimes, users are faced with the problem of how to properly synchronize devices. Therefore, let’s figure out in detail how to connect wireless headphones to an iPhone. In parallel, we will consider the main problems.

The manual is universal and suitable for all iPhone models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max.

Only one earphone works

If the user encounters this problem, you need to try to fix it in different ways.

  • First option. Put the earplug in the case and wait at least 10-15 seconds. Reconnect to smartphone.
  • Second option. You need to turn off Bluetooth on the iPhone and start it again. If the action does not help, you can restart the headset.
  • The third option. It happens that one of the headphones does not see the phone. You need to select “Forget device” in the settings, and then connect both as a new pair.
  • Fourth way. In the main menu of the iPhone, in the equalizer, set the slider to the center position. It happens that the indicator moves to the extreme left or right position.

Connection issues after upgrade

Very rarely, there is a synchronization problem after installing a new version of iOs on the iPhone.

  • Restart Bluetooth first and re-pair,
  • Ideally, restart your smartphone,
  • Remove all major sources of interference that might interrupt or interfere with the signal.

If the headphones are branded:

  • Open the case next to the phone. A corresponding prompt should appear on the display.
  • Try connecting another wireless headset to your iPhone. If this does not help and there is still no connection, we recommend contacting technical support.

One Airpod is quieter than the other

There are several reasons:

  • One of the headphones is discharged. Need to put the headset in the charging case.
  • Check that the holes are clean and not stained, and there is no debris on the screens. If there is contamination, then it is necessary to carefully clean the device with a brush.
  • Be sure to check volume settings on iPhone.

Reference! If the sound quality remains poor, you hear clicks, whistles, squeaks, we recommend taking the headset to a service center for repair.

iPhone does not see headphones, what to do?

There are several types of headphones for iPhones: traditional wired, with which each of us is familiar, and wireless of the new generation. Apple gave them the name Airpods. After the release of the headset and its appearance on the shelves, the manufacturer faced complaints from users that there were flaws in the Airpods. Let’s consider this problem in more detail in this article and try to find solutions, for what reasons the iPhone does not see the headphones and why the iphone headphones do not work.

First, we will follow the correct path to consistently configure Airpods:

  • Go to the “Home” window;
  • Open the case with Airpods and place it next to the iPhone;
  • The installer splash screen appears on the phone;
  • Next, we find the “Connect” button and select “Finish”.

If you set Hey Siri on Airpods (2nd generation), it will work through headphones. When this option is used for the first time, the options for configuring it are initially opened. When iCloud is working, the headset syncs automatically.

What you can do with headphones?

One earbud is quieter than the other

To solve such a problem, do the following:

  • check the charge of both headphones, because one may be discharged;
  • check the hole for debris;
  • if you find dust or debris on Airpods, you need to carefully remove it;
  • check the volume;
  • if after all these manipulations the sound quality on the device is not clear, then you should contact a specialist to fix the device.

Why the sound may disappear?

What to do if sound drops out during calls or music playback?

There are several ways to solve the problem:

  • if the headphones are charged, they should be switched to the operating mode of one headphone when talking on the phone;
  • The most common problem is the iPhone’s Bluetooth function not working properly. To fix this problem, you need to restart your phone;
  • if the above methods do not work, you should restart the headset;
  • if you disable the “Auto-detect ear” option, this will narrow the functions of the gadget and eliminate the reason for the lack of sound.

Siri is your assistant in everything

To use Siri on second-generation Airpods, you just need to say “Hey Siri.” First-generation headsets require you to double-tap the earbud to activate Siri. This function provides the ability to play music through headphones, ask questions (add volume, pause music, etc.).

Headphones run out quickly

The manufacturers give a 5 hour battery life guarantee. Airpods will last three hours if they are charged for 15 minutes, and when the headset is placed in the case for 24 hours, it will work all day.

There are several ways to get around this problem:

  • check how the headset is configured using the “Auto-detect ear” option. If the option is enabled, then the headphones will be automatically turned off, at the moment when you do not use them to ensure the safety of the charge;
  • if after all the above manipulations the battery is quickly discharged, then restart the headset;
  • nothing works. contact the service.

iPhone does not see headphones

If for some reason iphone headphones do not work, you need to do the following:

  • check if the Bluetooth function is enabled on the phone;
  • restart your smartphone or headset;
  • check the battery charge level, if it is low, then connect it to the network;
  • scan ports for dust;
  • check the working condition of the cable and damage to the connectors;
  • view the mesh on one and the second earbuds, if you find debris, then remove it with a soft brush.

Turn on Find My iPhone / Find My

Another important condition for an effective search for an accessory is the inclusion of the Find My iPhone function (before the release of iOS 13, it was called Find My iPhone). If this was not done before the loss of the gadget, it will not work to find it. How to activate this tool, we previously talked about in a separate article.

Learn more: How to turn on Find My on iPhone

iPhone / iPad

If you are searching for Airpods from an Apple mobile device, do the following:

    Open Find My / Find My iPhone and go to the Devices tab. If you have problems with the launch, use the instructions provided at the link above.

  • In the list that appears, find your Airpods and tap on their name. How to rename Airpods
  • The location of the accessory or the message “Geolocation not found” will be indicated under the accessory. The latter is typical for cases when the headphones have not been connected to the iPhone for a long time or have been disconnected from it. Note that the location is not displayed accurately (neither relative to the map, nor relative to the address. it is often indicated without details), but in order to navigate and find a lost gadget, this is often enough (under the conditions that we indicated at the beginning of the article).
  • In the action menu that appears by clicking on the device name (items.3 of the current instruction) in the corresponding tab of the Latitude application, you can create Routes (the standard Maps application will open), but at the shortest possible distances, this is most likely not will give the result. important is the second option. “Play sound”, with which you can find the nearby accessory.

    Important! The sound will play for two minutes with a gradual increase in volume, but you can turn it off yourself. If one of the headphones is in your ear, be sure to remove it before turning it on, because the emitted signal is high-frequency and can damage your hearing.

    If both earbuds are lost, a beep will be played from both the left and right. It can be disabled or enabled separately for each, which will help you find accessories if they are not nearby. For a more convenient orientation in the application, you can activate the gyroscope, after which the map on the screen will rotate in accordance with your movements in space. It is also possible to change the appearance of the map: it is carried out through its settings, three modes are available.

    If you see that Airpods are far away from you in Find My iPhone / Find My, and some time has passed since the last switch on, the likelihood of finding them is significantly reduced. You can only hope for a positive result if the image on the map, which, we repeat, is not always accurate, shows a well-known location. For example, it can be a work or a friend’s house, a public institution where they know you well, etc. It is obvious that you can return to such a place and look for an accessory not only using a mobile application, but also by asking friends, sincerely hoping on their honesty and conscientiousness.

    For the rest, if the location of Airpods on the map is a point you just passed by, unfortunately, but most likely someone has already picked them up. Especially if this is a public place, but it does not place a search once again. If the accessory is connected to another device and a new Apple ID, it will no longer be possible to see and find it. The fact is that neither the headphones themselves nor their charging case contain any unique information in and on themselves, by which they could be identified. Therefore, even if the person who found the gadget wants to return it to the owner, he is unlikely to be able to do it.

    Find Airpods

    Find My iPhone / Find My is available in two versions. an iOS / iPadOS app and a website, which means it can be used both on a mobile device and on a computer. First, you need to log into the Apple ID account that was used when connecting the headphones.

    How to find Airpods

    Important! You can find lost Airpods only if they are outside the branded case, their battery is not discharged, and the distance between the headphones and the device from which the search procedure is carried out does not exceed 10 meters. the average Bluetooth range. In other cases, it will be possible to find out only the last location of the accessory and the time of going online (connecting or trying to do so, opening the case).

    Connecting and binding to Apple ID

    A prerequisite for ensuring the ability to search for Airpods is their preliminary connection to an Apple device (iPhone, iPad, iPod or Mac computer) and, as a result, linking to their Apple ID account (happens automatically). These are necessary for using headphones, and therefore, for sure, it was already done by you before.

    Read more: How to connect Airpods to iPhone

    A computer

    You can also initiate the search procedure for Airpods from a computer running Windows, macOS or Linux. all actions are performed in the browser. The disadvantages of this approach, in comparison with the one discussed above, are obvious. almost complete or complete lack of mobility (the ability to freely move with the device) and the inability to use where there is no access to Wi-Fi.

      Follow the link above and log in to your Apple ID account. The following instruction will help to do this, the first method considered in it.

    If your account is protected with two-factor authentication, please confirm it,

    by specifying in the browser the code that will come to the iPhone, after clicking “Allow” in the notification window.

    To continue, use the “Trust” button.

    Once on the main page of the service, click on the “Find iPhone” application shortcut.

  • If you need to sign in again, enter your account password again. This will need to be done manually, since the password managers on this page for some reason do not work. the data they substitute is perceived as incorrect.
  • On the top panel, expand the All Devices menu.
  • Choose your “Airpods”.

    Further actions are no different from those discussed in paragraphs 3-5 of the previous part of the article.

    Find My AirPods! (Updated for the iOS 13 Find My App!)

    Tip: To change the view of the map, use the drop-down menu located in the lower right corner of the interface.

    How to find your lost Airpods

    Let’s face it, anyone who owns a pair of Apple Airpods or Airpods Pro has lost them at least once or twice. Small wireless earbuds are easy to lose, but thankfully Apple has created a few tools to help you find your earbuds quickly and easily. In our article, you will learn how to do it.

    How to Find Lost Airpods with iPhone, iPad, or iPod Touch

    One of the easiest ways to find your Apple Airpods is with the built-in Find My service. The best thing about it is that you don’t have to register your Airpods directly with the service. If you are already using an iPhone, iPad or iPod Touch registered to Find My, connecting a pair of Airpods to the unit will automatically enable Find My for your headphones.

    If your Airpods are lost, out of a case, or relatively close to you, you can use Find My to quickly find them again. Unfortunately, if your Airpods are in a case or out of range, Find My can only show you where they were last connected. However, it’s better than nothing, and it can help you track down your Airpods.

    To find your Airpods using your iPhone, iPad, or iPod Touch, follow the instructions below:

    • Open the Find My app.
    • Select the “Devices” tab.
    • Choose your Airpods.

    On your computer, you can do the following:

    • Go to iCloud.com.
    • Sign in with your Apple ID.
    • Open the “Search iPhone” tab.
    • Click on “All Devices”, then on “Airpods”.

    How to find Airpods using sound

    If you know your Airpods are around but just can’t find them, you can use sound to find them. Just like you might have asked someone to call your cell phone when you couldn’t find it, you can make your Airpods play sound to help you find them. This can be more useful than, for example, looking at the GPS location of Apple headphones if you are in your home or office.

    To find Airpods playing audio, simply follow the steps below:

    • Open the Find My app.
    • Select the “Devices” tab.
    • Select your Airpods from the list.
    • Click on “Play Sound”.

    What to do if your Airpods are disabled

    If you tried to find your Airpods using the Find My service, but found that they are not connected to the network, you will not be able to see the GPS location of your headphones or play audio to help you find them. You just get a “Location not found” message in the app. However, all is not lost.

    You can access the last known location of your Airpods, which can help you narrow your search. You will also receive a notification when your Airpods are back online if someone finds them or a thief tries to use them.

    Have you lost or couldn’t find your Apple Airpods in the past? Share your tips with our readers in the comments section below.

    How to use Find Airpods

    Open the Find My iPhone app. In the list of devices, select Airpods.

    The last location of the headset is displayed on the map. If the Airpods are grayed out on the map, then the headphones are not connected to any device and you will have to go back and look for them locally. When you press the Action button and the car icon, the driving routes to the destination will be displayed on the screen.

    Find Airpods, or How to Find Lost Apple Earphones

    Starting with iOS 10.3, Apple’s mobile operating system introduces a new Find Airpods mode that allows you to locate your Airpods. This function will be very useful if you lose your headset or in a situation where one of the headphones is lost among the sofa cushions and you cannot find it.

    To find lost Airpods, you need to launch the Find My iPhone application and select headphones from the list of gadgets. The application will not only display the location of the accessory on the map, but will also allow you to remotely play sound for an easier search for the device.

    Apple did not disclose details about the new feature, so how it works can only be guessed at. Since Airpods connect to the gadget via Bluetooth, when the connection is disconnected, the iPhone will save the GPS coordinates of the place where the disconnection occurred. In fact, this process is similar to the “Show parking location” function in “Maps”, which automatically records the location of the car if it is paired with an iPhone via Bluetooth.

    In reality, Find Airpods does not display the exact location of the earbuds, but the coordinates of where the headset was last connected to the iPhone. If the earbuds did not end up in the hands of thieves, there is a high probability that the device is in the same place where it was lost.

    How to Search Find My Airpods Using Beep

    If the Airpods appear in a green circle on the map, it means that the headset is connected to one of the devices. In this case, click the Actions button at the bottom of the screen.

    When you press the Play button, Airpods will emit a high-pitched sound, making it easier to find.

    On the bottom panel of the application, you can activate the sound of the left and right headphones at the same time or mute any speaker if only one of them is lost.

    Models and their differences

    • Airpods. wireless model with microphone;
    • Earphones. a standard teardrop-shaped device;
    • EarPods model. with microphone and remote control;
    • In-Ear Headphones. in-ear headset.

    EarPods are comfortable earbuds designed with ear geometry in mind. They are ergonomically shaped and equipped with dual speaker grilles for richer sound. Silicone case softly adheres to the ear, creating a barrier to extraneous sounds.

    Apple EarPods with Remote and Mic and In-Ear Headphones come with buttons and a microphone. This allows you to control your iPod without taking it out of your.

    Which headphone model to choose?

    Original Apple headphones are a logical addition to Apple gadgets. They allow you to listen to music, stay in touch with friends and control your phone.

    Apple is actively developing a series of Airpods earphones. with fast wireless charging in a special case.

    Connector for wired models

    Since 2012, the brand has been releasing models with a Lightning adapter. In the latest models of devices, this connector has replaced the standard mini-jack (3.5 mm jack). They only connect to Apple appliances.

    Headphones iPhone Earphones connect to devices with Lightning using an adapter, without an adapter. to all portable gadgets with a 3.5 mm output.

    Apple Wireless Headphones. Fast Charge

    Apple Airpods wireless headphones let you listen to music for up to 5 hours without charging. And the wireless case provides fast charging in just 15 minutes! Multiple charging cycles allow you to listen to music for up to 24 hours.

    Apple Headphones

    • by popularity
    • ascending price
    • descending price

    Most Popular Searches For Apple Headphones

    • For phone
    • With bass
    • Closed
    • Small
    • For player
    • Inexpensive
    • For PC
    • For TV
    • With volume control
    • Stereo
    • For Playstation 4
    • Folding
    • For girls
    • For running
    • With a long wire
    • Open
    • Baby
    • For swimming

    Synchronization

    Thanks to the W1 processor, the Airpods headphones are equipped with the Multipoint function. They sync with Apple devices via iCloud and pair via Bluetooth. Signal range can reach 40-50 meters.

    Apple device functionality

    The speakers give out deep and rich sound, have additional functions. automatic volume control and music playback, receiving calls.

    The wireless iPhone model lets you talk to your Siri personal assistant. They understand when you shoot them. at this moment the music is paused. Double tap on the earpiece starts the call answer or pause function.

    Apple Wireless Headphones. Fast Charge

    Apple Airpods wireless headphones let you listen to music for up to 5 hours without charging. And the wireless case provides fast charging in just 15 minutes! Multiple charging cycles allow you to listen to music for up to 24 hours.

    Connector for wired models

    Since 2012, the brand has been releasing models with a Lightning adapter. In the latest models of devices, this connector has replaced the standard mini-jack (3.5 mm jack). They only connect to Apple appliances.

    Headphones iPhone Earphones connect to devices with Lightning using an adapter, without an adapter. to all portable gadgets with a 3.5 mm output.

    Apple Headphones

    • by popularity
    • ascending price
    • descending price

    Most Popular Searches For Apple Headphones

    • For phone
    • With bass
    • Closed
    • Small
    • For player
    • Inexpensive
    • For PC
    • For TV
    • With volume control
    • Stereo
    • For Playstation 4
    • Folding
    • For girls
    • For running
    • With a long wire
    • Open
    • Baby
    • For swimming

    Apple device functionality

    The speakers give out deep and rich sound, have additional functions. automatic volume control and music playback, receiving calls.

    The wireless iPhone model lets you talk to your Siri personal assistant. They understand when you shoot them. at this moment the music is paused. Double tap on the earpiece starts the call answer or pause function.

    Models and their differences

    • Airpods. wireless model with microphone;
    • Earphones. a standard teardrop-shaped device;
    • EarPods model. with microphone and remote control;
    • In-Ear Headphones. in-ear headset.

    EarPods are comfortable earbuds designed with ear geometry in mind. They are ergonomically shaped and equipped with dual speaker grilles for richer sound. Silicone case softly adheres to the ear, creating a barrier to extraneous sounds.

    Apple EarPods with Remote and Mic and In-Ear Headphones come with buttons and a microphone. This allows you to control your iPod without taking it out of your.

    Synchronization

    Thanks to the W1 processor, the Airpods headphones are equipped with the Multipoint function. They sync with Apple devices via iCloud and pair via Bluetooth. Signal range can reach 40-50 meters.

    Which headphone model to choose?

    Original Apple headphones are a logical addition to Apple gadgets. They allow you to listen to music, stay in touch with friends and control your phone.

    Apple is actively developing a series of Airpods earphones. with fast wireless charging in a special case.

    Compatible with Apple gadgets

    Accessories are designed to connect to iPods, iPhones and iPads. Wireless earbuds automatically pair with Apple appliances. just select Airpods on all devices! One has only to plug in the headphones, the iPhone is immediately synchronized with them.

    What to do if the iPhone 7 does not see the headphones and why

    First of all, it is worth understanding that headphones for the iPhone, as well as for some other devices, are divided into classic wired and new wireless generation accessories. The latter were called Airpods, they are gaining popularity, gradually displacing confusing wired devices from the market.

    If the iPhone 7 headphones are not working, then it may be due to a hardware failure.

    For your information! Since their release, Apple has received many complaints about design and connection issues. If the phone does not see new wireless headphones, then most likely this happened due to errors in synchronization.

    The reason for the lack of sound and the impossibility of identifying the device may be:

    • operating system updates that were incorrectly installed due to failures;
    • dirt, dust or sand has got into the headset jack, as a result of which the phone does not receive contact for detecting and switching to the listening mode from the headphones;
    • dirt or, more often than not, moisture has got into the phone case. It could oxidize the input pins for the headset, which also prevents the signal from passing to the processor;
    • the smartphone or headphones were dropped, as a result of which the loop responsible for transmitting signals was damaged.

    iPhone 7 Plus also suffers from headphone problems

    The first thing to do is restart your iPhone or iPad. If that doesn’t work, you can reset all custom settings and updates. Perhaps the problem lies in the software part in which the failure occurred. After restoring the phone, it is advisable to return the backup copies of the updates that were prepared before resetting the settings.

    It often happens that some program simply does not allow the phone to turn on the vibration option. You need to remember which updates or software products were recently installed on the device and remove them manually, and then check for the connection and sound.

    If water gets into the phone, the contacts may oxidize and the operation of many modules will be impaired. Needed as soon as possible:

    • Unscrew the outer screws of the iPhone case and detach the back cover.
    • Using a suction cup or a sharpened credit card, carefully remove the display and remove its ribbon.
    • Dry the device with a hairdryer and remove oxidation with alcohol, if they appear.
    • Assemble the phone in the same sequence.

    If after all this music does not appear and the headphones are not detected, the problem is in the connector. It is recommended to gently clean it with a needle and cotton swab, which will remove dirt and dust lumps that have accumulated there due to wearing in a trouser.

    The headset may not turn on due to a defective adapter

    Why iPhone can’t see headphones via Bluetooth

    Even iPhones, which are the epitome of reliable and modern mobile technology, can have problems identifying headsets and other devices over Bluetooth. The most common causes of the problem are:

    • violation of the software integrity of the firmware, physical damage to the motherboard and individual contacts of the wireless module;
    • various software failures both due to unforeseen actions and during updates;
    • conflicts between system and user applications.

    Important! Installing software from unverified sources can not only cause the operating system to fail and software conflicts, but also the complete or partial inoperability of the gadget.

    The adapter must be plugged into the connector through which the iPhone is to be charged

    The correct operation of Bluetooth is also affected by increased temperature, moisture, drops or surges in the home power supply during recharging.

    How to turn on wired headphones on iPhone

    The headset from the iPhone can be easily used on the iPad or iPod touch. If these are wired headphones with a 3.5 mm jack, you just need to insert it all the way into the corresponding jack on the phone. This should be done as carefully as possible, without connecting the accessory abruptly, moving it along the sides. If everything is done correctly, an icon will appear on the display, symbolizing that all contacts in the socket are closed and the headphones are successfully connected.

    On iPhone 7 plus, the jet connector is at the bottom

    Note! You can perform all these actions with other accessories with a 3.5 mm audio jet, but remember that it makes no sense to connect headphones with an impedance of more than 32 ohms. The power of the phone and battery is not enough to produce the same high-quality sound that they are capable of when connected to a computer or laptop.

    How to connect the speaker to the phone via Bluetooth

    For users who like to listen to music through speakers wirelessly, the method of connecting a Bluetooth speaker to an iPhone will be relevant. This can be done as follows:

    • Put a speaker or a pair of them in close proximity to the phone to ensure future wireless communication. If the distance is too long, the connection may fail.
    • Turn on the speakers and switch to pairing mode by pressing the corresponding button on the case. If not, then you should carefully study the instructions for use of the speakers.
    • Go to the phone menu and select the “Settings” icon (gray gear).
    • In the general parameters window, find the “Bluetooth” item and go to it.
    • Switch on the module by moving the slider to the appropriate position. After loading, a list of devices in the immediate vicinity and ready to connect will appear on the screen. The speakers will be displayed under the name of their manufacturer or model.
    • Click on the names of the columns and connect to them. Pairing may take some time, most often it takes no more than 2-3 minutes. If the columns are not visible, you can turn them off and on again or refresh the search list on your phone.
    • After pairing, the speakers are ready to go. You can test them, turn on any melody.

    Native headphones on the iPhone seven

    Note! Sometimes, to connect to the speakers, you need to enter a password, which is indicated on their case or box. If it is lost, please refer to the speaker manual.

    One earpiece from the iPhone stopped working: what to do

    Unfortunately, the quality of the Apple headphones is poor. Airpods have certainly propelled the company forward in this regard. But after constant use for a couple of months, they also often fail. The most amazing thing is that most often it is one earpiece that breaks, and it is the right one, which contains the microphone and the volume or video recording switch.

    It would seem that you have to buy a new accessory or use it in one ear, but there is one catch. All sounds in the phone are reproduced in stereo mode: the song is decomposed into left and right channels. One can hear a voice, and another, for example, the sounds of individual musical instruments. This is why you may not always enjoy the sound quality when listening in one ear.

    Airpods may not be supported on older iPhones

    The solution to the problem is peculiar, since it does not make the second earpiece work. The point is to set the sound to play only in mono mode. It uses only one canal and all components pass through it to one ear. To switch to mono, you need to go to the phone settings, find “Universal Access” and switch the desired parameter.

    How to set up headphones on iPhone

    You usually only need to set up wireless headphones. If they are used for the first time, then you need to make sure that the latest version of the software is installed on the smartphone. Then you should perform the following actions:

    • Go to Home Screen.
    • Open the case with the headphones and place them next to the phone.
    • Wait for the setting animation to appear on the display.
    • Click “Connect”.
    • In the case of the Pro version of the headset, carefully study all the instructions.
    • Click “Finish”.

    The accessory may not connect due to moisture getting into the phone case

    Important! If you are signed in to iCloud, the headphones will automatically set up to work with any supported Apple ID-connected devices.

    Why iPhone doesn’t see headphones. what to do

    Many people love to listen to music, it inspires and gives strength. It is better to do this with headphones so as not to disturb others, especially since their tastes may not coincide with the musical preferences of the music lover. Sometimes with accessories of this kind, or rather with their connection, problems arise. The owners of expensive technology are not immune from this, as are the lovers of cheap smartphones. It happens that the iPad, iPod or iPhone does not see the headphones. This material will tell you in as much detail as possible what to do if the headphones on the iPhone 7 do not work, how to set up the connection and what to do if one headphone suddenly stops functioning.

    Airpods were stolen. How to find headphones

    Denial, anger, bargaining, depression and acceptance.

    An unpleasant situation: while the wife was in the hospital, Airpods were stolen from her right from the room. To my surprise, they did not take the iPad Pro or other valuable items. And they encroached on the headphones. On the one hand, I am glad that our people understand technology and deftly determined that these are Airpods in a case, and not some kind of dental floss in a box. On the other hand, the headphones were still loved and brought a lot of joy, but now they are gone. What to do?

    The procedure was as follows. They looked for headphones in the ward, lifted the mattress and moved furniture, performed many energy-consuming actions, but in vain. They announced the theft to the police, filed a statement, after all, this is significant material damage: headphones cost almost 14,000 rubles, like an inexpensive Xiaomi phone. While the police are looking, I decided to see what else you can think of.

    He who seeks will find?

    It’s easy to lose headphones, but to find them. Let’s say I am the rightful owner, I still have a receipt and even a box with a serial number. What can I do? Yes, essentially nothing.

    There are no serial numbers on the headphones themselves, the code is indicated inside the charging case. But how can you track it down or find it? Hypothetically, you can study all the offers on Avito and flea markets, visit the electronics markets, that’s just what’s the point.

    By themselves, Airpods are not trained and do not know how to go online, therefore, it is no longer possible to track them after the headphones have “made friends” with someone else’s device.

    The procedure is as follows. You take someone else’s headphones, put it in a case and press the white button on it. Then you need to confirm the connection on the iPhone, that’s all. Now they have a new owner. The only thing left for him is to rename them, assigning a new name. The conditional thief Peter will not walk with Airpods named Natusik!

    How to find headphones at home

    In the event that headphones are sown somewhere at home, then everything is not so terrible.

    Launch the Find iPhone application on your iOS device, then you can see where the Airpods are on the map. Let it not show up to the room, but nevertheless you can at least understand whether it makes sense to look for headphones in the apartment or not. If you click on the “Play Sound” button, then listen, suddenly it’s Airpods squeaking under the sneaker. But if they sit down, then the chances of finding the device are drastically reduced.

    All instructions are detailed on the Apple website, I will not repeat myself, you can read and learn everything.

    Ask Apple for help

    An interesting point: the headphones disappeared late in the evening, and in the morning a notification came in the mail that Airpods were connected to another device almost at midnight. At this time, the wife was already happily sleeping and, in principle, could not use the headphones. Apparently, this bad person decided to evaluate the capabilities of Airpods.

    Unfortunately, if the headphones are connected to another device, then you cannot find out what kind of phone or tablet it is, or where it is. It’s a pity, such a function would be very useful for both the owner of the lost equipment and the police in their work.

    How to find your lost AirPods with your iPhone, iPad, or iPod touch. Apple Support

    And so we can only state that someone uses headphones.

    Just in case, I asked for help with Apple support. They asked for the serial number of the headphones, at the same time clarified with which device they were last used.

    The earbuds themselves can be tracked using Find My iPhone if the earbuds are connected to your phone and account. If the headphones are connected to another phone, they will no longer be able to be tracked through your account. In your case, you should contact the police and write a statement about theft.

    Hope dies last and one can only hope that the police will be able to find the headphones. Although the search is similar to the search for a needle in a haystack: no leads, unless something happens by chance.

    In the meantime, I made the following conclusion for myself. If Airpods are stolen, don’t despair, just buy Airpods again and enjoy such wonderful headphones.