Factory Reset Windows 7

Reset settings in Windows 7 (system rollback)

Following the tips in this guide, each user will be able to roll back the OS without any hassle or hindrance. Here are the most relevant and valid reset methods. Windows, which you will not find anywhere else. The advice information was compiled by Windows repair and tuning specialists.

Computer owners are often faced with the need to roll back to the factory settings of the operating system Windows with complete erasure of all data. Performing such actions may be required in several cases:

  • Selling a computer.
  • System software failure.
  • Installation of incorrect drivers, programs.
  • Loss of performance.
  • Clogged up with remnants of previously installed applications.
  • System crash caused by virus.

Only the probable reasons for the rollback of the system are listed. Windows 7 to factory settings. There are other reasons for this undertaking. To execute reset Windows 7, follow the instructions in this manual and the process will be much faster and more productive.

Factory Reset Windows 7

If you decide to reset your computer, you need to take care of your data stored on the hard drive, which were accumulated during the use of the Windows system. This is very important because, in addition to files, the system stores program data and passwords, so simply formatting the hard drive is not enough. In addition to personal data,s, photos and music, you must separately save additional program files, without which the software will not be able to function. A vivid example of this, the program Keeper from Web money, which cannot be launched without a special file, which will result in loss of access to your wallets with all the means on them. Therefore, the reset must be carried out thoroughly prepared.

Return with integrated features

Partition situations like this happen quite often, so don’t worry if you can’t restore the configuration to its original state. You can recover data without reinstalling the system using a USB flash drive or other media on which the Windows installation package is unpacked. A removable drive must be prepared and formatted in advance. Fat 32. Creating a recovery card must be done through a previously downloaded image of the system, which using the program Nero or Ultra Iso is deployed to the media. Now you need to insert the card into the USB-connector and restart the computer. When the reboot is performed, you need to boot the system from the memory card, and not from the hard drive.

To do this, press the key several times in a row F8, until a small menu appears prompting you to download available systems on the media connected to the system unit. If you cannot call the boot menu, you need to go into the BIOS and specify the boot with USB. Thus, the next launch will not begin with the hard drive, but with removable media. Instead of reinstalling, you need to select the recovery mode, which will restore the factory settings of Windows. This method may not delete all the data, so in case of failure, the installation memory card can be used in the future to reinstall, but more on that later in the article.

Resetting the system through the control panel

Resetting parameters and system resources on laptops is carried out almost like on a PC. The only difference is the key combination that must be pressed to open the menu during reboot. Most models use Ctrl F12, F8, F9, F10, depending on the manufacturer and model.

In this way, a full factory configuration is returned. If the system remains incompletely cleaned, you can perform a reinstall. To do this, you need a pre-prepared installation card or a Windows distribution disk. You can use the assembly or license, the process is identical in both cases.

Supporting Resources

Among all the rollback methods Windows 7 There are additional packages that help roll back the system to factory settings. These are pre-created points that other users have produced that they wish to share with others. The return package may consist of a standard layout or additional utilities that will be needed to complete the installation.

First you need to download the finished image and copy the contents to a card or hard drive, depending on how you created the rollback point. If you can’t find or create such an installer among your friends, you can turn to other people on the Internet who can give you a predefined point for resetting the resources of the installed operating system. Fortunately, the network capabilities allow you to perform the procedure very simply using a file hosting service.