Disassemble the indoor unit of the Samsung air conditioner

How often does the air conditioner need to be cleaned?

Everyone understands that the time for full filtration is very dependent on the cleanliness of the room. If the environment is polluted, then the air conditioner will require frequent cleaning. In order to understand whether the air conditioner needs cleaning work, you can make an experiment. To do this, disassemble the device, if the filter is already completely clogged, then the next time, you need to do this a little earlier, and if the filter is still clean, then the procedure can be postponed until later. Also on some modern models, you can determine the level of contamination of the filter, using an indicator that gives information about the level of contamination at the present time.

In some residential areas where perfect order reigns, daily wet cleaning is carried out. the filters are changed only once a year. But this is, of course, an exceptional moment.

Ideally, the air conditioner should be cleaned every two weeks. Correct and regular maintenance of the device will provide a pleasant and comfortable atmosphere in the house.

How does the air conditioner work and what does it consist of?

There are several types of air conditioners on the market. At first glance, it seems that they are all completely different. But it is not so. The principle of operation is similar for all of them. Window and mobile air conditioners are considered the simplest and most budgetary options. Both options consist of only one block.

The window air conditioner is mounted in the window opening, and the mobile air conditioner can work in any places where there is an open window or a slightly open door to bring the hose out.

A more complex unit is a split system. Their installation requires certain knowledge and skills. It consists of two blocks: indoor and outdoor.

  • Compressor designed to maintain the flow of compressed gas. freon.
  • Four-way valve responsible for the distribution of freon during cooling or heating.
  • Fan.
  • Blow-off condenser.
  • Radiator. Cooling and condensation of freon gas takes place in it.
  • Freon system filters, the task of which is to protect the ingress of foreign particles into the compressor
  • Spigot connection to which the copper pipes for the roof with the indoor unit are connected
  • Front Panel.
  • Deep cleaning filter.
  • Radiator.
  • Evaporating and heating freon.
  • Horizontal blinds.
  • Indicator panel.
  • Fine filter.
  • Fan.
  • Vertical louvers designed to adjust the direction of air flow masses.
  • Condensate tray. Condensate is discharged from there through the drain hose.
  • Control board.
  • Fitting connection.

DIY Air Conditioner Disassembly Guide

This method of disassembling a home air conditioner is universal, it is also suitable for disassembling the vast majority of brands that exist today.

In order to start disassembling the unit, you should stock up on the necessary tools. For work you will need:

  • Screwdrivers “minus” and “plus” of different diameters.
  • Hexagon set.
  • Slim soldering iron.
  • Special disinfectant for air conditioning systems.
  • Extended bristle brush

You need to know that in order to disassemble and clean the unit, you do not need to dismantle the unit from the wall, drain freon and open the copper track.

First you need to disconnect the device from the power supply. After that, the protective filtration located in the block is removed. How to remove it correctly can be found in the operating book that came with the air conditioner. The whole process is very detailed and clearly spelled out there.

After that, the external panel is removed from the unit. And then two bolts are unscrewed, which are closed by fuses, and the frame is pulled in its direction. It is fixed on the upper side with two latches.

The entire panel that was on the top side will be covered in mold and dirt. It must be sent to the car wash immediately.

With the use of a small force, from the grooves, the blade is pulled, which is responsible for the direction of the air masses.

Then the lower area of ​​the indoor unit of the unit is removed from the valves. fasteners, where the drain hose and the wire supplying the air conditioner are disconnected.

Then you should disassemble yourself and disconnect all electrical wires. In order not to get confused in their subsequent connection, you should schematically sketch or paint their location.

If you have basic knowledge of electronics and radio engineering, then you do not need to write it down, but when reassembling, refer to the block drawn on the back side, to the detailed connection diagram.

Further, the fastening brackets are squeezed out, and the body of the electrical unit and transformer is removed. To dismantle the drain and outlet hose, you should very carefully and slowly squeeze out the three supporting fasteners. The opening, which serves to blow out air masses from the block, also, like the blade part, will be covered with mold, from which such a nasty aroma spreads.

After that, the supporting bolts of the electronic engine of the split system should be unscrewed and the radiator should be lifted with great care, after which the motor support can be removed. Next, the blades and the engine located in the cell are removed. In order to eliminate the possibility of an accidental fall of the radiator, it can be placed back.

Then it is necessary to remove the thermal lock located on the fastening bolt of the friction wheel with the rim of the electric motor. But you need to keep in mind that these things will be difficult to disassemble on your own. In order to avoid accidental combustion of the rubber part that transmits energy, it is necessary to carefully heat the bolt head using a thin soldering iron, while during the soldering process, you need to try to unscrew it. After successfully separating the blades from the motor part, all moldy and dusty parts are placed in the sink.

In order to rinse thoroughly, remove all foreign odors and disinfect all removed elements, it is worth purchasing a special agent for air conditioners. It does an excellent job of removing fungi, mustiness, mold and germs.

When starting to cleanse, you first need to shake the can. The product is sprayed over the entire surface that requires cleaning. Waiting for twenty minutes. Then the dirty areas are scrubbed with a long-bristled brush. And washed with water. The air conditioner is assembled in the reverse order.

How to disassemble the indoor unit of the air conditioner

Sooner or later, every home air conditioner owner faced the problem of pollution and unpleasant odors. Accordingly, before eliminating this problem, he had a question how to disassemble the indoor unit of the air conditioner.

In order to get an answer to this question, it is worth figuring out what the internal air conditioner system is.

How the air conditioner is disassembled

If, when you turn on the air conditioning system, the flow of cooling air carries with it a sour, stagnant moldy smell, then you should think about cleaning it. To do this, you need to flush the outdoor and indoor unit of the split system.

In order to solve such a problem, you can use two ways: to attract a specialist, but this is a very expensive way, or to disassemble the indoor unit of the air conditioner with your own hands to perform cleaning work.

The latter method is more preferable, since it will save a significant amount of money, and the acquired useful experience will come in handy in the future.

Thus, it is clear how to disassemble the indoor unit of the air conditioner, and there is absolutely nothing complicated about it.

You just need to stock up on a little patience, free time and so that nothing distracts.

Disassembling on your own will help to preserve the family budget and present a new experience that will be very useful in the future. Air conditioners need to be periodically cleaned and each time calling a master is not only expensive, but also not always convenient. As a rule, specialists have to wait and adjust to their arrival time.

And the ability to craft and understand technology brings moral satisfaction.

Disassembly and assembly of a computer system

Disconnect the power cable:

Dismantling a computer system begins with disconnecting an external device. Make sure the computer system is turned off, if not, successfully shut down the system and then start to disconnect external devices from the computer system. It involves unplugging the power cable from the distribution board, then unplugging the cable from the SMPS (Switching Power Supply) at the back of the CPU cabinet. Do not start disassembly without disconnecting the power cord from the computer system. Now remove the remaining external devices like keyboard, mouse, monitor, printer or scanner from the back of the CPU case.

The standard way to remove tower shrouds was to unscrew the screws on the back of the shroud, slide the lid an inch back, and remove it. This task requires a screwdriver that matches the screw type.

Remove adapter cards:

Make sure there are any cables or wires to the card that can be attached and decide if it will be easier to remove them before or after removing the card. Remove the screw, if any, that holds the card in place. Grasp the card by the edges, front and back, and gently wiggle it longitudinally to release.

Removing discs is easier. There may be three types of drives on your computer system: hard drive, CD / DVD / Blue-ray drives, floppy drives (almost absolute at present). They usually have a power connector and a data cable connecting the device to the controller board or a connector on the motherboard CD / DVD / Blue Ray drive may have an analog cable connected to the sound card for direct audio output.

SAMSUNG DIGITAL INVERTER SPLIT TYPE AIRCON. AIRCON CLEANING

Power can be connected using one of two connectors, a Molex connector or a Berg drive connector. The Molex connector may need to be wiggled slightly from side to side and pressed slightly outward. The Berg connector can simply be pulled out, or it may have a small tab that needs to be lifted with a screwdriver.

Now, disconnect the data cables from the drive as well as from the motherboard connector. The hard drive and CD / DVD drives have two types of data cables. IDE and SATA cables. IDE cables require more care when removing, as this could damage the drive connector pins. Carefully turn the cable to the side and remove it. SATA cables can be easily disconnected by pressing the tab and pulling the connector back.

Now remove the screws and slide the drive out of the back of the bay.

Memory modules are installed on the motherboard as microcircuits, which can be damaged by hand if used incorrectly. Be careful to grasp the chip only by the edges. SIMM and DIMM are removed in a different way:

  • SIMM. gently push back the metal tabs while holding the SIMMs in the slot. Tilt the SIMM chip from the tabs to a 45% angle. Now it is removed from the socket. Put the SIMM in a safe place.
  • DIMM. DIMM slots have plastic tabs at the ends. Press the tabs down and away from the outlet. The DIMM will pop up slightly. Now grab it by the edges and place it securely. Never allow dust to get on the chips.

.Split system

ComfortStar Split AC Error Codes and Troubleshooting

ComfortStar AC error codes and identification codes. When codes appear on the digital display of the Indoor ComfortStar mini-split air conditioner, it means that a certain option is enabled or there is a problem with the air conditioning system. The displayed error code or ID code tells you about a problem or what is happening in your AC. Here are all the codes and their meanings. Below you will also find information on troubleshooting, maintenance and filter cleaning of the ComfortStar AC split system.

ComfortStar Split AC Codes and Troubleshooting

Knowing the meaning of the identification code or error code (if the error code appears). you will know what action to take to fix your AC (if something is not working properly). Then you can fix the problem and repair the air conditioner. Whether it is a specific operation that is performed inside AC, AC changes modes, troubleshooting is required, routine maintenance is required, or parts needing repair.

Conclusions and useful video

To carry out such a disassembly, you need attention, time and patience. The procedure does not require a complex instrument or special skills. But an inattentive attitude during work is unacceptable, since this can completely ruin the split system.

How to Open Body of Samsung Triangle Split Air Conditioner | Samsung AC Indoor Body Open in Hindi

Do you want to talk about how you cleaned the internal component of the climate unit with your own hands? Do you have useful information that will be useful to site visitors? Please leave Комментарии и мнения владельцев in the block below, ask questions, post a photo of the article.

The device of the indoor unit of a split system and how to properly disassemble it

Cleaning the air conditioner should not be limited to just caring for the exterior. Dust penetrates everywhere, accumulates and interferes with the normal operation of mechanisms. You can invite a master from the service center for maintenance, but many craftsmen cope with this task on their own.

In order to carry out all the maintenance work yourself, you need to know the structure of the indoor unit of the split system. We will tell you everything about the design of climatic technology. We will give recommendations according to which it was possible to disassemble the unit without fear, clean it and assemble it again.

How to disassemble split system indoor unit Samsung

A few words about cleaning

After completing the disassembly of the indoor unit, dry cleaning is recommended. This requires a household vacuum cleaner and a brush.

They act simultaneously: the available space is treated with a brush, and the edge of the hose of the switched on vacuum cleaner is held nearby in order to immediately remove the debris. Some treat the interior of the block with dry steam if there is access to the steam generator.

After all the elements that can and should be washed have been removed from the indoor unit, it should be cleaned with a household vacuum cleaner.

Then you can use a cleaning agent, for example in the form of an aerosol. They hold him for some time, you need to act according to the instructions. Then the surface is treated with clean water using a brush or spray gun to remove the cleaning agent that has dissolved the dirt. You will need a container to collect the flowing water.

Now you need to wash the turbine, filters and other elements, dry them. This can be done with common home remedies, but there are handy kits available for this purpose. Then the device is reassembled. All fasteners must be in place and carefully tightened or snapped into place.

Special products designed for cleaning climatic equipment are able to effectively dissolve accumulated pollution. After the allotted time, the composition should be carefully washed off

disassemble, indoor, unit, samsung, conditioner

Parts removed from the device can be washed with hot water and brushed. There are household chemicals specifically designed for such equipment. But ordinary laundry soap will give a good result. Of course, you need to protect the parts from damage at the same time.

For example, stiff bristles can severely damage the strainer. A lot of dust accumulates on the impeller, each groove must be processed. All filter elements are thoroughly washed. Dry them before installing.

The surfaces of the evaporator and rotor, as well as the condensate container, are especially carefully treated. It does not hurt to check the condition of the tube through which moisture goes out. If you clean it with a piece of rigid cable, you can find serious contamination there. They are simply pushed out and the tube is rinsed.

A special kit for cleaning air conditioners consists of a large plastic bag of a convenient size and a set of devices that give it the desired position

#samsung || HOW TO REMOVE 12000 BTU SAMSUNG indoor unit panel cover.

Some craftsmen decided to abandon the disassembly of the indoor unit. They remove only the front cover, the filter, and then cover the wall with polyethylene and rinse the indoor unit with a thin stream of water under high pressure. This is not the best solution, as it is possible to break the air conditioner and damage the decorative finish.

If the cleaning measures did not give the expected result, the full performance of the split system has not been restored, it will be necessary. You will find a repair guide in our recommended article.

How to paste wallpaper under air conditioner?

This is a rather difficult task. There are people who “just fine”, and there are others who want to do everything flawlessly.

  • Gently stick, slipping a couple of centimeters under the device, new wallpaper. This method will not bring the desired result, since it will be noticeable to the naked eye that the wallpaper is not fully glued under the air conditioner.
  • Remove the air conditioner for a while, and paste the wallpaper perfectly.

How to remove the air conditioner from the wall during repairs so that the final result is pleasing. we will consider in detail below.

How does the air conditioner work and what does it consist of??

There are several types of air conditioners on the market. At first glance, it seems that they are all completely different. But it is not so. The principle of operation is similar for all of them. Window and mobile air conditioners are considered the simplest and most budgetary options. Both options consist of only one block.

The window air conditioner is mounted in the window opening, and the mobile air conditioner can work in any places where there is an open window or a slightly open door to bring the hose out.

A more complex unit is a split system. Their installation requires certain knowledge and skills. It consists of two blocks: indoor and outdoor.

disassemble, indoor, unit, samsung, conditioner
  • Compressor designed to maintain the flow of compressed gas. freon.
  • Four-way valve responsible for the distribution of freon during cooling or heating.
  • Fan.
  • Blow-off condenser.
  • Radiator. Cooling and condensation of freon gas takes place in it.
  • Freon system filters, the task of which is to protect the ingress of foreign particles into the compressor
  • Spigot connection to which the copper pipes for the roof with the indoor unit are connected
  • Front Panel.
  • Deep cleaning filter.
  • Radiator.
  • Evaporating and heating freon.
  • Horizontal blinds.
  • Indicator panel.
  • Fine filter.
  • Fan.
  • Vertical louvers designed to adjust the direction of air flow masses.
  • Condensate tray. Condensate is discharged from there through the drain hose.
  • Control board.
  • Fitting connection.

Published by Artyom on 18.02.2019 18.02.2019

Regular maintenance of the air conditioner requires disassembling its indoor and outdoor unit. This is necessary when replacing parts of the split system and its complete cleaning. It is worth dealing with the features of the process and the consequences of improper disassembly.

Signs indicating the need for a cleaning procedure

Any split system needs constant maintenance. You should know the main signs when cleaning split systems is necessary:

  • The appearance of an unpleasant odor
  • Decreased work efficiency
  • Incorrect operation of the device (the temperature of the modes is not maintained)
  • Discharge of liquid from the indoor unit
  • When connecting the power supply, observing various noises

Reasons for the appearance of dirt

As many believe, the air conditioner is designed to work at full capacity, therefore, it is used at all times. But the owners do not think about the fact that all the dirt cleared by the split system accumulates in it.

  • The device absorbs uncleaned air, processes it and releases the freshest and cleanest air into the room. Any remaining dirt is deposited in the indoor and outdoor units. To eliminate it, you need to clean the split system.
  • Damp air entering the interior of the device releases condensed water, which becomes source of mold, mildew and odor. This environment is a perfect source of unsafe germs and bacteria.
  • The low height of the device also facilitates its operation with large volumes of dirty air. This increases the load on the air conditioning compressor. Street dust, exhaust gases enter the outdoor unit in large quantities if it is located on the lower floors. The optimal solution is to install the outdoor unit of the air conditioner at the highest possible height.
  • It heavily pollutes the device in the summer, when poplar fluff gets inside. If fluff particles are not removed from the device in a timely manner, its accumulation can completely block the operation of the system.
  • Dirt accumulated inside the air conditioner serves as source of the appearance of various midges, ticks and other parasites.
  • Lack of maintenance and cleaning of the block, in which dirty water accumulates, will lead to its overflow, the formation of blockages. Instead of a sewer, contaminated liquid will flow through the radiator grill into the room.