Apple burns but iPhone 7 does not turn on

iPhone 6/7/8 / X / 12 won’t turn on lit Apple on and off, how to solve?

Sometimes a glowing Apple on the iPhone screen is on, it hangs and turns off, then the screen will be black, it does not respond to pressing. There are quite a few probable reasons for the appearance of this trouble. Today we’ll look at the most common iPhone won’t turn on problems and try to find a solution.

The reasons why the Apple burns but the iPhone does not turn on

Before referring to the instructions, you need to understand what caused the iPhone to not turn on and the Apple on the black screen burns. The following reasons are listed:

Sometimes the battery is discharged, the phone is completely discharged, so an Apple appears. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on.

The phone freezes when you turn it on, probably a breakdown of the “Power” button. Occurs when disassembling an iPhone.

The device does not boot further than an Apple. a problem with the power supply of the device. This often happens with phones during network jumps when charging.

Charging controller is broken, there was a power outage.

Problems with the power supply circuit of the device. The device lay on the charge during a strong power surge.

Problems with the motherboard, while the phone itself may even boot sometimes and even work for a while. True, the glowing Apple on the iPhone screen will appear more and more often until it stops starting normally at all.

What to do if the iPhone does not turn on and the Apple hangs

An easy way to solve the problem is to reboot the device using the Home and Power buttons, which must be pressed and held for 10 seconds. If the reboot does not help, then an update or flashing of the device will be required. To do this, run iTunes on your PC.

Step 1: Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to the phone yet). Turn off the iPhone while holding the HOME POWER buttons (on iPhone 7, you must hold HOME and. Volume)

Hold down the HOME button and connect the USB cable to the device. Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen.

A notification will appear on the computer screen that the device is in recovery mode

Step 4. Now just click on the Restore button. Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple’s servers. In this case, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.

DFU mode

If your iPhone won’t turn on, even after the one tried above, there remains one more way. restore iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step-by-step instructions.

There is an easier way to solve this problem, using Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Logging in or out can help you solve “the Apple is on but the iPhone won’t start”.

Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to your computer (or Mac) using a USB cable.

We launch the program. You will see several buttons, but only one will be active. “Enter recovery mode”. Click on it and wait for a while. You will see the iTunes logo on the display of your iPhone.

Then press the button “Exit recovery mode”. We are waiting for the time it takes to restart your iPhone. Done!

Useful software for iPhone / iPad is always in great demand among users and often ends up in the collection of selected programs. Be sure to take note of the Tenorshare ReiBoot utility. It allows you to enter or exit iPhone recovery mode in the easiest and fastest way. And it will help when standard system methods do not work.

iPhone won’t turn on: Apple is on and off

Salon consultants make a helpless gesture: iPhones, which do not turn on after the “Apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.

The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white Apple”: the gadget starts up, the “Apple” burns on the screen for a long time, then the screen just goes out.

Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can also eliminate the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white Apple”?

How to get rid of the “white Apple” if the iPhone is not jailbreakable?

If the “white Apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It is very simple: if the call is in progress, it means that the download of the gadget is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is an opportunity to demolish the “buggy” applications that provoked the problem of the “white Apple”.

You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.

Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.

Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white Apple” does not go? Such a test result speaks of a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “Apple” gadget to the caring hands of the service center masters.

IPhone Freezes When Turning On: Possible Causes

Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones fell into a cyclic reboot. they switched on and off sequentially until the charge ran out.

Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white Apple”!

However, if the iPhone turns on before the “Apple” and turns off, this can be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white Apple”:

    Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, do not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the Apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.

The problem of the “white Apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:

From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.

The easiest way to get rid of the “white Apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.

What to do if iPhone won’t turn on after jailbreak?

Turn off your smartphone.

Hold the volume up button on the side of your iPhone.

With the key pressed, try to start the mobile device.

An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.

It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.

If the smartphone does not turn on even with the volume key pressed, the user has no choice but to jailbreak. We talked about several ways how to remove jailbreak from iPhone. in case of the “white Apple” problem, it is recommended to flash the device.

Re-flashing. it just sounds scary, in fact, the procedure is quite simple:

Launch iTunes and connect the iPhone to PC with a cable.

Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on an iPhone in our article on DFU-Mode.

iTunes will notify you that iPhone has been detected in recovery mode.

Click on the “Restore iPhone.” button.

iTunes itself will download and install the new firmware on the gadget. You just have to wait for the completion of the procedure.

Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.

If the problem of the “white Apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.

Option 2. Reinstall iOS

If the first method did not help, you should try reinstalling the software on the iPhone. To do this, the iPhone launches in DFU mode. This is done like this. we connect the smartphone to the computer and launch the iTunes program. Next, hold down the Power and Home buttons. You need to hold it for about ten seconds. After this time, only the Power button must be released. After that, iTunes should see the device (the screen will remain dark).
Well, then the program should offer to restore the device from a backup and reinstall iOS.

Then, after the device is restored. make a software update.

The iPhone does not turn on but the Apple is on the screen. What to do?!

Popular smartphones from Apple, whatever one may say, this is the same computer, albeit a mobile one. And with him, like other representatives of this class of devices, troubles can happen. both hardware and software. One of the common reasons that can happen to them is when the iPhone does not turn on, but the Apple is on after pressing the Power button.

People call this unpleasant problem the “white Apple”. In fact, this is a certain state of the iPhone, which is characterized by the display of the company’s logo on the screen (a bitten glowing Apple) when trying to turn on the smartphone. In this case, further loading of the device does not continue. At the same time, he does not react to anything and, as usual, does not turn off. How to be?
The easiest thing to try is a Hard Reset. But, let’s take our time and consider all the options in order.

So, what can you do to restore the phone’s performance if the iPhone does not turn on, the Apple is on?!
There are such methods:

Option 1. Hard Reset

We turn off the iPhone using the Hard Reset method, that is, the so-called “hard reset”. To do this, you need to simultaneously hold down and hold down two buttons for 10 seconds: Home and Power. Keep out until the device turns on.

Option 3. Picking Cydia

This method is an alternative to the previous one in the event that you do not want to restore the device or for some reason cannot do it while the iPhone does not turn on and off, but the glowing Apple is on.

IPhone 7 Does Not Switch On ( Easy Repair for Dead IPhone 7)

Here I will make a small lyrical digression. The fact is that very often the reason that the iPhone does not turn on is the installation of some third-party application, which either did not get up correctly, or does not work correctly. Then you should try to remove it and restart your smartphone. Another equally common reason is Cydia tweaks.

To restore the performance of the iPhone, which has an Apple on the screen and does not disappear, let’s try to load it without Cydia tweaks. To do this, turn off the device, press the volume up button. “” And hold it down, wait until iOS boots up without Cydia tweaks. If the download is successful in this mode, the reason is clearly in the last installed Tweak. Delete it and the device will work again.

If it still does not boot, then restart it again. Then after 5 minutes try calling your iPhone.
If you manage to get through. great! This indicates that the phone’s loading is interrupted at the very last moment of the OS launch. Then you need to try to access the file system through the iTools or iFunBox programs and use them to search for the files that are responsible for the malfunction.

Otherwise, whether you like it or not, in order to remove the burning Apple on the phone screen, you still have to reinstall the IOS using the method I described earlier.

Note: This manual is suitable not only for smartphones iPhone 4, 5 or 6, but also for iPad tablets, because both have one operating system installed, which means that an Apple can burn on the iPad and it does not turn on and does not turn off.
Good luck and stable work!

How to reflash a problem iPhone yourself?

It is only at first glance that a flashing seems like a terrible and impossible task. Even a beginner can handle it. Do the following sequence of actions:

  • Launch iTunes on your computer and connect your mobile device using a cord.
  • Next, you need to put your smartphone into DFU mode. If you skip this step, the computer will not see your gadget.
  • iTunes will display a notification of the following character: “iPhone detected in recovery mode.” Click OK and agree.
  • Select “Restore iPhone” and wait for the process to complete.

The iTunes app will download and install the new firmware. All you have to do is wait for the procedure to be completed.

Jailbreak, iPhone won’t turn on. What to do?

  • You need to turn off the smartphone and hold down the volume up button, which is located on the side panel.
  • Without releasing the volume key, turn on the mobile device. The download will start without apps from Cydia.
  • If the iPhone turns on and boots normally, the problem is definitely in some tweak.

It will not work to identify the problematic jailbreak tweak. you have to act at random. Erase the apps one at a time until the smartphone starts up in the usual way.

How to turn on iPhone without jailbreak?

What if you haven’t jailbroken but iPhone still turns on and off? When the Apple device has not been jailbroken, try this test. Restart your mobile device and try to call it after 5 minutes. If a call is in progress, the download stops at the last stage. This is a good sign. you will be able to access the FS! So, remove any buggy applications without any problems.

apple, burns, iphone, does

Please note that in this state of the phone, iTunes does not provide the ability to change the file system. We recommend using alternative options. iTools or iFunBox programs. All you have to do is connect to your PC and uninstall applications one by one, similar to jailbreak tweaks.

If the ring test is negative (no call), there is a hardware problem. Alas, it will hardly be possible to solve it without technical knowledge, a soldering iron and a multimeter. It is better not to go into the filling of the iPhone, but to give the gadget to the caring hands of professionals.

iPhone won’t turn on: Apple is on and off

Burn, burn clearly, so as not to go out! In our case, the opposite is true. When you turn on the Apple smartphone, a white Apple lights up on a black background. But after a few seconds it goes out, and we see a dark screen again. What is happening, why the iPhone won’t turn on? Let’s try to make the correct diagnosis and “cure” our Apple friend.

Alas, even such reliable technology as the iPhone is not immune from breakdowns and software failures. One of the most common problems is loading, which is popularly called the “white Apple”. Its essence boils down to the fact that the iPhone does not turn on. an Apple burns on the display for several seconds and goes out or lights up again. Most users immediately carry their gadgets to the service center. However, in some cases, the malfunction can be eliminated on your own. without a long wait for repairs and material investments. We tell you how to fix problems with a burning Apple.

  • TOP 6 Reasons Why iPhone Won’t Turn On
  • Jailbreak, iPhone won’t turn on. What to do?
  • How to reflash a problem iPhone yourself?
  • How to turn on iPhone without jailbreak?
  • Drawing conclusions

TOP 6 Reasons Why iPhone Won’t Turn On

  • Unsuccessful jailbreak. In 2013, hackers from Evad3rs were among the first to hack iOS 7. However, the presented update turned out to be crude, and users who “hacked” an Apple smartphone started complaining about the “white Apple”.
  • Installing a “buggy” application or tweak. The problem is similar to the previous one. Gadgets go into a cyclic reboot, turn on and off sequentially until the battery runs out.
  • The power circuit is out of order. If your iPad won’t turn on and the Apple is constantly on, the problem might be with the power circuit. As a rule, it occurs due to a sudden power surge. We advise you not to put your smartphone on charge during a thunderstorm and immediately pull out the charger from the outlet if you turn off the light.
  • The battery has reached the end of its life. Use original chargers to prolong battery life. Do not completely discharge the battery.
  • Defective motherboard. The breakdown does not make itself felt immediately. A characteristic symptom. when turned on, an Apple lights up, but with each new turn on, the waiting time increases. Start saving money for repairs, as a motherboard failure is a serious breakdown.
  • The gadget is frozen. The iPhone could turn off on the street, and when trying to turn it on, it could freeze on the “white Apple”. The manufacturer does not guarantee stable operation of iOS and iPhone at temperatures below 32 degrees Fahrenheit (below zero Celsius). If in the cold your mobile phone turns off on its own and does not turn on, place it in a dry and warm place, leave it for about half an hour.

Drawing conclusions

The appearance of the “white Apple” and the iPhone freezing when turned on is not a reason to run to the master. In some cases, the problem can be solved independently by reflashing the Apple smartphone and removing the buggy application. It’s bad if you haven’t jailbroken your iPhone, and the Apple still burns. This is an alarm bell associated with a hardware failure of the device. To fix it, you will have to contact the service center.

Restore iPhone via iTunes

If the iPhone does not turn on even after connecting to the computer, then only restoration will help out.

❗ In most cases, recovery involves deleting all data from the device. You can return them only if you have an up-to-date backup.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

iTunes will report detecting iPhone in recovery mode. In the window that opens, select “Update”. Initially, this option should be selected, as it can allow you to return the device to a working state without losing data.

If data lossless recovery is possible, the iPhone update process will begin. Wait for it to end. ❗ Never disconnect your iPhone from your computer.

If the update fails, then a recovery should be performed. Re-enter iPhone into recovery mode (step # 2) and select “Recover” in the iTunes window that opens. Wait for the end of the operation.

Updating or restoring will bring your iPhone back to working condition.

Perform a hard reboot

The first thing to do if the iPhone won’t turn on is to force it (aka “hard”) restart. It takes the iPhone out of recovery mode, which may have been accidentally turned on, and simply resets software errors on the device.

Force restarting works differently on different iPhone models.

On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (Power button, located on the side or top of the case) at the same time for 15 seconds until the Apple logo appears on the screen.

On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for 15 seconds until the Apple logo appears.

On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for 15 seconds until the Apple logo appears.

iPhone won’t turn on, black screen. what to do

IPhone won’t turn on? There is a solution.

iPhone won’t turn on and Apple is on? Or is the screen completely black and the iPhone is unresponsive to button presses? Both of these problems can happen to any iPhone user without dropping the smartphone. Learn what to do if your iPhone won’t turn on in this tutorial. You can solve the problem without going to the service center and the accompanying expenses.

Connect iPhone to charger

Often, the iPhone won’t turn on and show no signs of life due to the fact that its battery is dead. Connect your smartphone to the charger and leave it connected for an hour.

A few important tips that Honor follows:

  • Use original or quality charging accessories. There have been cases in which the iPhone turned off due to a dead battery, but did not charge due to using a broken charging adapter or cable. Be sure to make sure the charger and cable are in working order.
  • Charge iPhone with electricity. It is very common for users to charge their iPhone from a computer USB port. But due to the old battery in the smartphone and the low power of the connector, charging simply does not occur.
  • Check if the connector is dirty. Sometimes iPhone won’t start charging due to a heavily soiled Lightning connector. Examine the charging port. If it is really dirty, clean it gently, for example with a toothpick.

⚡ How to understand that the iPhone has started charging?

If the battery logo with the Lightning cable is on the screen. iPhone does not charge and asks for a connection to the charger. If this logo is displayed after you put the iPhone on charge, then the cable or adapter is out of order. Use other charging accessories.

apple, burns, iphone, does

If only the battery is displayed on the screen, then charging is successful. It is worth worrying only if this logo is displayed unchanged for more than 30 minutes. In this case, you should also replace the charging adapter and cable.

? Remember how a forced reboot is performed on your device. It can help with most of these crashes that can happen on the iPhone.

A forced reboot is completely safe. Its execution does not delete any data on the iPhone, so you can perform it safely.

❗ Methods to restore iPhone in this tutorial are arranged from easy to hard. If a hard reset doesn’t work, go to the next method. He will have to help solve the problem.

  • Perform a hard reboot
  • Connect iPhone to charger
  • Connect iPhone to iTunes in Recovery Mode
  • Restore iPhone
  • If all else fails

Connect iPhone to iTunes in Recovery Mode

If the iPhone does not react to either charging or hard restarting, the smartphone must be put into recovery mode. Here we immediately note that you may not need to directly restore the iPhone. Everything in order.

The first step is to try to get your iPhone back in working order without restoring it. This method has saved thousands of iPhones without erasing data, which implies recovery. Therefore, we strongly recommend that you initially use it.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

In the iTunes window, click “Eject iPhone”.

apple, burns, iphone, does

Restart your iPhone. To do this, simply hold down the Power button (side button). Alternatively, you can perform a forced reboot using the method described above.

As a result of this operation, your iPhone can turn on and work again as before without the need to restore.

If all else fails

None of the above methods helped? This means that your iPhone has a physical breakdown and you need to contact a service center.

Why iPhone won’t turn on?

A failed battery is the most common reason iPhone stops turning on. If you previously noticed that the smartphone was rapidly discharged, turned off by 10-30% of the charge, turned off in the cold and any other similar anomalies happened to it, then the problem is definitely with the battery.

Replacement will help. expensive in Apple authorized service centers in Russia. 3000-7000 thousand rubles.

Failure of the power controller is another very common cause of iPhone failure. Symptoms before a smartphone fails are similar to a battery breakdown. accidental disconnections of the device, overheating.

Replacement is relatively inexpensive. You can change the power controller or other microcircuit associated with the charging process for about 2,000 rubles.

Failure of other components. iPhone may not turn on due to the breakdown of dozens of different components, including the motherboard. Most often this happens after the fall of the smartphone. It is possible to determine what exactly broke down only during the diagnosis.

Repairs can be ruinous. If the iPhone didn’t overheat before it broke, then it’s best to start praying right away that the motherboard is intact. Replacing it, especially on newer iPhone models, will cost a pretty penny.

Before going to the service center, we recommend that you contact the official Apple support. The company’s specialists will be happy to help with advice.

The Apple lights up and the iPhone turns off. what to do

The Apple lights up on the iPhone, after which the smartphone turns off. the wording of one of the most common iPhone problems. It can appear really suddenly. Many users who have encountered a problem say on our forum that their smartphones turned into “brick” after making a call, removing some applications from the device or other very standard actions. Whatever reason brings your iPhone to a similar state, this guide will help you solve the problem.

The Apple lights up and the iPhone turns off. what to do

Connect iPhone to computer with USB cable and launch iTunes. Make sure iTunes is up to date. You can check for iTunes updates on Windows by going to Help → Updates, on a Mac, from the Updates tab in the Mac App Store. You can download the current version of iTunes on the official Apple website.

Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds.

Then release the Power button and continue to hold the Home button until iTunes detects the device in recovery mode (about 10 seconds).

In iTunes, click “Restore iPhone” and confirm to start the restore. Important! All media and other device data will be erased. The iPhone will also have the latest iOS version for your device.

In the window that opens, click “Next” and “Agree”.

Note that initially iTunes will download the version of iOS required for the device from Apple servers, and only after that the recovery will begin. You can track the progress of the firmware download by clicking on the button in the upper right corner of iTunes.

It should also be emphasized that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and starts direct recovery, the progress bar will appear on the iPhone display.

After successfully restoring the iPhone, all that remains is to make the initial setup and start using the device.

What to do if iTunes does not detect iPhone in DFU mode

There are several reasons why iTunes may not detect the iPhone in DFU mode, ranging from an old version of iTunes to a technical malfunction. Before going to a service center or starting repairs on your own, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try to connect iPhone to iTunes on another computer using a work cable.

Also, the problem might be an iTunes error. In this case, iTunes must be reinstalled, but do it correctly by removing the program components in the following order:

  • iTunes.
  • Apple Software Update.
  • Apple Mobile Device Support.
  • Bonjour.
  • Apple Application Support (32-bit).
  • Apple Application Support (64-bit).

An extensive guide on how to properly reinstall iTunes is available here.

If nothing helps to determine the iPhone in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit, and after replacing it, the iPhone starts to function normally again. For detailed instructions on how to change the battery yourself on various iPhone models, visit our website:

  • How to change the battery on iPhone 6s and iPhone 6s Plus.
  • How to replace the battery on an iPhone 6 or iPhone 6 Plus.
  • How to replace battery on iPhone 5s.
  • How to replace battery on iPhone 5.
  • How to replace battery on iPhone 4.

But be warned, there may be a problem with other iPhone components, so the best way out of this situation is to go to a service center.

Blog about modems, routers and gpon ont terminals.

Discharged battery

Banal utterly, but one of the most common reasons. The user is sure that the phone’s battery is charged, but it is almost completely discharged. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on. By the way, this is also possible in the event of a charger malfunction. The user thinks that the device is charged, but he just finally sat down. Try charging from a computer via a USB cable.

Hardware problems

Unfortunately, the reasons why the iPhone does not turn on and the Apple on the screen is lit are very often problems with the hardware stuffing of the phone. And then flash it. don’t flash it, but it won’t work anyway. What could be the reason?

Unfortunately, only those who are friendly with a soldering iron and a multimeter can fix this kind of malfunction with their own hands, the rest of the users can only take it to the service center for repair.

Equipment setup

Software crash

If you have recently installed any application before, digging through the settings or tried to jailbreak, then with a high degree of probability we can say that this is exactly what causes a crash and the appearance of a glowing Apple.
Very often the so-called “hard reset” helps. restarting the phone using the Home and Power buttons, which must be pressed and held for 8. 10 seconds. In more than half of such cases, the iPhone then boots up and works successfully. The main thing. do not forget to disconnect it from the computer or charger before that.
Did not help? Then you should try to reflash the device. To do this, you need to launch iTunes on your computer, and then connect your iPhone to your computer with a USB cable. then turn it off by holding the Home and Power buttons. You need to hold it until the screen goes out, after which you need to release the Power button, but do not release Home. This will put the iPhone in DFU mode. The screen will be black, but a message should appear on the computer that the device is in recovery mode. Let go of the “Home” button. In the iTunes application, click the “Restore” button, after which the process of downloading and installing the new firmware on the phone will begin.

After this procedure, you will receive a “clean” device, without settings and additional programs, and the burning Apple on the iPhone should disappear.

iPhone won’t turn on and Apple is on. what to do?!

Tablets and smartphones from Apple have long won the reputation of being fairly reliable devices. And the iOS operating system did not give any particular reason for criticism. Nevertheless, sometimes problems do happen. electronics, whatever one may say, are capricious thing. One of the frequent occurrences is that the iPhone does not turn on and the Apple on the screen burns. On this, the phone freezes and you will not be able to turn it off in the usual way. There are quite a few probable reasons for the appearance of this trouble. Let’s try to figure them out and, if possible, try to fix it ourselves.

Did it help? Recommend to friends!

Reasons why the Apple logo is lit up and the iPhone won’t turn on

  • System crash caused by software problems or recent updates to the iOS operating system. In some situations, the problem also appears when interacting with unsupported characters. we are talking about hieroglyphs sent via iMessage, which on some versions of iOS lead to an emergency shutdown of the iPhone.
  • Battery discharged or defective.
  • The power adapter and charging cable are damaged and are not able to charge the iPhone even up to 5%, which is why the Apple logo does not disappear.
  • Mechanical damage: iPhone dropped and constantly reboots, remained under water for a long time, or lay for several hours in the sun or in the cold.

Reset iOS settings

If the iPhone does not turn on periodically (out of 5 times no more than 2-3 freezes on the Apple logo), then before contacting the service center and experimenting with the DFU mode, it will not hurt to roll back the operating system parameters to the “factory” state. The procedure will not take even 10 minutes, and even a backup copy will not be needed: the content stored in memory will not disappear anywhere.

Reset starts from the “Settings” menu “General”. The desired section is at the bottom of the list, right above the “Turn off” button.

After the transition from the actions that appear, it remains to select “Reset all settings”, enter the PIN code (verification via Touch ID or Face ID is not available) and wait until iOS clears the parameters and restarts the iPhone.

Often, a reset is already enough to get rid of freezes and technical problems when an Apple blinks or the iPhone screen starts to blank out unexpectedly. But even more often, you can’t even look into the “Settings”. iOS doesn’t even load. Therefore, it’s time to move on to universal methods.

IPhone does not turn on (Apple burns and goes out): from reasons to reset

Hello everyone! Today I ran into a problem. the iPhone does not turn on, the Apple is on, and the smartphone itself just goes out. at first it seems to turn on, then it turns off and it goes out. And so constantly when you turn it on.

Apple mobile technology rarely encounters unsolvable technical problems and errors. But the problem with the iPhone not turning on or hanging on the Apple logo has already become overgrown with legends and has become a widespread phenomenon. And that means it’s time to figure out the details and find out why the iPhone does not turn on, the Apple burns and goes out, and how to save mobile equipment using iTunes.

  • Reasons why the Apple logo is lit up and the iPhone won’t turn on
  • Reset iOS settings
  • IOS Restore or Update via iTunes
  • IPhone Recovery via Third Party Software

what to do if your Apple iphone 7 or 7 plus won’t turn on

IOS Restore or Update via iTunes

iTunes. Apple’s media combine. is often viewed with distrust due to its button-laden interface and confusing navigation. In fact, the tool: it will help you filter both the entertainment media library, and will help with the recovery of a locked or non-working iPhone.

The only thing you have to deal with is downloading and installing the latest version of iTunes, and connecting your iPhone to your PC using a USB cable. Next. go to the parameters of mobile technology, presented in the section “Overview”.

It is advisable to prepare an up-to-date backup copy of the contents of the internal memory at the bottom of the interface before starting the procedure. Formally, no data can disappear when the iPhone is restored to work. But extra safety net won’t hurt. Backups are generated and stored: either on the hard drives of the computer, or in the iCloud cloud storage in the iOS settings.

Regardless of the choice, you will have to return to the top of the interface and click on the “Restore iPhone” button. iTunes will automatically download the update files and transfer the latest iOS version to mobile devices in the background. The procedure takes on average up to 30 minutes (this is due to the preparation and preliminary unpacking of files before updating or restoring). After several reboots, the problem with the “iPhone does not turn on, the Apple is on and off” will disappear.

IPhone Recovery via Third Party Software

Unofficial software tools handle iOS problems like iTunes. And sometimes they offer even more: an intuitive interface, a predictable course of actions and recommendations for beginners.

The same diagnostic service ReiBoot, adapted for computers with Windows and MacOS, offers in a matter of moments:

  • Run DFU mode without holding the buttons on the iPhone case, but through a special menu in the interface.
  • Return to standard mode or go to a special section with “Support”. where tips appear for situations when an Apple is on or mobile equipment does not respond to pressing.

It is easy to interact with ReiBoot: the developers first suggest connecting the iPhone to the computer using a cable, and then, in the interface that opens, select “Enter recovery mode”.

How you have to proceed depends on the reason for the appearance of the non-disappearing logo and the version of the iPhone (4, 5S, 6, 6S, 7 or newer). But with a 99% probability, ReiBoot will first download the stable version of iOS from the official Apple servers (either new, or the current one, but “reset” to factory settings).

Then it will automatically start the update process. The procedure takes from 15 to 30 minutes, depending on the speed of the Internet, the amount of space occupied on the internal memory of the iPhone and the number of errors found in iOS.

Force reboot

The prompt solution to the problem is to restart the smartphone. To do this, hold down the Home and Power buttons with your fingers, then wait 10 seconds. When the specified time has passed, the smartphone logo will appear on the screen. The gadget will turn on, then connect the charger to the socket and wait for the battery to charge.

Reasons iPhone 7 won’t turn on or charge

A common situation is that an expensive iPhone 7 does not turn on and does not respond to charging. Users in this situation panic, but do not be afraid. It is possible that the iPhone 7 does not turn on and does not respond to charging for simple reasons that the owner can quickly fix.

There are three main problems:

  • mechanical damage,
  • power failures,
  • difficulties with updating the operating system.

Now a little more about why the iPhone 7 does not turn on.

Ways to solve the problem

What to do if iPhone 7 won’t turn on? There are four options for solving the problem.

IPhone 7 won’t turn on

reading time: 4 minutes

If the iPhone 7 does not turn on, and the connection to the charger does not work, do not despair, it will be possible to repair it. Today we’ll tell you what to do if your iPhone won’t turn on.

Apple smartphones are reliable devices, but they also break down periodically. In 90 percent of cases, the blame is the user who treated the gadget carelessly. In other situations, this is a manufacturing defect. Let’s talk about what to do when iPhone 7 won’t turn on.

Recovery using DFU mode

DFU-mode. a special mode of operation of iOS, which is used to update and restore gadgets. If an emergency occurs when the smartphone cannot update, use this method. If your iPhone 7 Plus won’t turn on, you need to do the following:

  • run iTunes on your computer;
  • connect your smartphone to a PC using a proprietary cable;
  • turn off the gadget by pressing the power button;
  • while holding this key, press also the volume down button for 10 seconds;
  • then release the power button, wait 5 seconds.

iTunes will notify you when your smartphone is connected. Now click the “Restore” button in iTunes, wait until the operating system starts.

In case of difficulties, try manually selecting and installing the previously downloaded firmware. To do this, go to iTunes using the above method and select recovery while holding down the Shift key. Now select the firmware file and confirm your choice.

Sometimes the Apple gadget refuses to enter DFU mode. This can be understood by a number of signs:

  • the company logo is lit on the screen;
  • the iTunes icon flashed on the display (the phone is in Recovery Mode, there are no items you were looking for).
  • iTunes does not see the connected smartphone.

If you observe such symptoms, try repeating the procedure for switching to DFU mode. After the restoration is complete, the phone will return to normal state by itself.

Power supply problem

Sometimes the smartphone refuses to turn on and charge due to a problem with internal components. The reason may be a battery that has sat down forever, a power controller, breaks in the loop contacts, breakdown of other elements on the motherboard. In this situation, complete disassembly and repair will help, we carry it to the service center. It is not worth eliminating the cause on your own, there is a high chance of causing additional damage.

Mechanical deformation

The first reason is mechanical failure. People charge their smartphone carelessly, use it while charging, which is wrong. Gradually, the connector wears out, the contacts are erased, and it becomes problematic to charge the iPhone. The charging cable is frayed, from such manipulations the gadget also stops working. Sometimes a button on a smartphone fails and the gadget no longer turns on. The reason for such damage is the careless attitude of the owner of the smartphone.

Charger connection

Some iPhone owners save on the purchase of chargers. And it is not surprising. the originals are not that cheap, and a similar model is easily purchased on Aliexpress. Problems of this kind with accessories are common. so connect your phone to the original charger and see what happens.

Apple flashes when charging iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Professional repairs may not be required if the Apple blinks while charging the iPhone and the device does not start. The reasons for the malfunction may be minor system malfunctions or a lack of power due to a broken USB cable. Try switching on the device using the original charger. If the iPhone is still blinking at the bottom, perform a self-diagnosis and check the device for mechanical damage.

Scratches and chips can cause malfunction of the modem, cable, motherboard and other internal elements of the device. You should not replace broken parts of your device yourself. seek help from qualified specialists who will help if the device blinks at the bottom and does not work correctly.

How to perform a hard reboot

If an Apple blinks on the screen while charging your iPhone and the device won’t turn on, try performing a hard reset. This method will fix some system problems.

Hard reboot stages:

  • disconnect the device from the charger
  • hold the power and Home buttons for a couple of seconds
  • wait for the Apple to appear on the display

If the reason that the Apple blinks while charging is changing the settings and setting the wrong parameters, the method will not help to correct the situation. In such cases, a full data reset and installation of new software is required.

To update the software, follow these steps:

  • launch iTunes on PC
  • connect your device (the Apple logo should appear on the screen)
  • turn off the device by pressing the Home and Power buttons at the same time
  • release the power button after the screen turns off (the icon should not light up)
  • release the Home button after iTunes informs about the start of data recovery
  • confirm in iTunes software recovery

The software update will be performed in DFU mode. until the programs are restored, the display should remain black, and the Apple logo will not appear on it. After finishing downloading data, try to connect the device. The manufacturer recommends using only original charger and USB cables.

How to restore the operation of the device

If you are using an original and working charger, but the iPhone still does not turn on and the logo blinks, you need to perform a series of actions that will lead to the restoration of the device.

Effective solutions to the problem:

  • hard reset iPhone
  • software update and network settings reset
  • cleaning RAM

To clean the RAM and restart all applications, just restart the phone. This option is suitable for any Apple technology. If, after cleaning the memory, the phone turned on, the reason that the smartphone did not work normally and the Apple blinked was in the freezing of applications.

Why does the device not start

Software errors can lead to the fact that when the charger is connected, your device does not turn on and the Apple icon logo blinks. The following problems can lead to this:

  • wear of spare parts
  • low battery
  • moisture penetration into the iPhone case
  • system problems

Also, when you turn on the iPhone, the Apple icon may appear and flash for a long time if the settings were incorrect. For your device to start working correctly, reset the indicators.

If the phone has sat down and won’t charge due to falls, the problem may be more serious. The impact could damage the connectors or disconnect the loop. If you do not have professional equipment and experience in disassembling equipment, you should not try to repair the device yourself. Qualitatively and accurately, only a qualified specialist who understands the technical features of Apple devices can troubleshoot an iPhone.

When a professional repair is needed

If, after restarting and restoring the software, the phone still sat down, and an Apple-shaped icon flashes during connection, the cause of the breakdown may lie in hardware problems. To eliminate breakdowns, it is often necessary to replace the following elements:

  • motherboard
  • Power button
  • power controller
  • flash memory

Only qualified technicians will be able to perform repairs efficiently and quickly. On the site youdo.com, they offer the services of a wizard who quickly and accurately repair gadgets of any model. Performers Yuda will tell you why when you put your smartphone on charge, the Apple icon flashes, and then they will offer to fix the problem as soon as possible.

Yudu professionals will repair the iPhone, taking into account all the manufacturer’s requirements. The craftsmen will quickly find out why the Apple blinks when charging the iPhone, and will competently repair the device using original spare parts.

Table of Contents