Anyview cast how to connect your phone

What’s streaming in Anyview on Hisense Smart TV?

Anyview Cast uses your WI-FI connection to wirelessly mirror content from your mobile device to your Hisense Smart TV, allowing you to instantly share photos, watch TV shows, videos, movies and play games.

How to connect your Hisense TV to your Android device

  • Turn on your TV and go to Settings
  • Now select “System” (2nd last option) from the menu on the left.
  • Then go to “Network” settings.
  • Select “Network Configuration” and set it to “Wireless
  • Go to Anyview Stream in the same menu and select it.

How to Factory Reset Your DEXP TV?

Menu. Settings. Restore & Reset. Reset. Erase everythingAnother option:

  • Turn your phone off
  • Press the power and volume up buttons at the same time
  • In the menu, use the volume keys to select “wipe data / factory reset” and confirm with the power key.
  • In the next window, select “reboot system now”

Connect your iPhone to the Smart TV to display the screen

You have organized a presentation in your office and you need to transfer the screen of your “iPhone by” to your TV? Don’t worry, it’s a lot easier than you imagine, you just need to get the right “tools”.

Apple TV

If you want to mirror your iPhone screen on your TV wirelessly, you should definitely purchase an Apple TV. When the Apple TV connects to your TV and connects to the same Wi-Fi network as the “iPhone”, you can use AirPlay to view your phone screen on your Smart TV.

To use the screen mirroring feature, you need to bring up the iOS Control Center (by scrolling up from the bottom of the screen or, if you have an iPhone X, in the upper right corner of the screen) click ” Duplicate” and select your Apple TV name from the menu that opens.

Then, to stop the transmission, you don’t need to go back to the iOS control center, tap the icon on the duplicate screen and select the Duplicate voice from the menu that appears on the screen.

See also  How to connect two computers with one cable

Cable

If you don’t want to buy an Apple TV or you want zero latency transmission (so without any risk of slowdown, which, however, with AirPlay is very small), you can buy a Lightning to Digital AV adapter, of which I spoke to you earlier and connected the iPhone to the TV with an HDMI cable.

Features of the adapter settings

After connecting anycast to the TV. Press input button on the remote control. A menu with several options should appear on the TV screen. Find HDMI in the list and click on it. After that, you should see a picture on the screen with instructions on what you need to do.

After that, do the device setup:

  • Connect the adapter to your home wi-fi network. To do this, you need to turn on Wi-Fi on your smartphone and find an available network named Anycast. To connect to it, enter a password from 1 to 8.
  • After connecting to the network, go to your mobile browser and enter in the search box: 192.168.49.1 b. You should see the device setup on the screen.
  • Click on the first icon, choose your home network.
  • Connect to the selected network.

You’re all set! You are connected to your TV and can output any video, photo or audio to the big screen. To disconnect from the adapter you will need to disconnect from the wireless network.

Anycast is a handy and useful gizmo that comes in handy for those who like to hang out on their smartphone and watch different kinds of content. Now you do not need to stare at the screen or hold the phone for a long time. Connect it to the adapter and your screen will be displayed on the big TV screen. The main thing is to follow the instructions and you will succeed!

If the TV does not have a built-in Miracast function, and we want to stream images from a phone, tablet, or computer to the TV via Wi-Fi, then we need a Miracast adapter. The most popular are MiraScreen and AnyCast. What these adapters are and how they work, I told you in this article. After buying such an adapter, you need to connect it to the TV and configure. This is the setup we will talk about in this article. Most Miracast adapters can be set up with a web interface from any device (a browser). You can access the settings at 192.168.203.1. You can do it from your Android phone or tablet as well as from your iPhone, iPad, or any computer. For mobile devices, there are special applications through which you can configure the MiraScreen/AnyCast adapter. For example, you can connect to a Wi-Fi router. I will also tell you how to solve the problem of not going to 192.168.203.1 and MiraScreen settings don’t open.

See also  How to remove the Pattern Lock from your phone

The settings themselves are not much, but they are useful and can be useful. For example, in the web interface of the Miracast adapter you can change the mode (AirPlay/Miracast). Connect the adapter to your router (to the Wi-Fi network). Change the adapter’s Wi-Fi network password, language, image resolution, update the firmware, reset the adapter, or perform a factory reset. For normal and full work of such an adapter you must at least enter its settings and connect to the router. To access it from all devices in your home network (which are connected to the same router).

I have a MiraScreen adapter. Probably one of the most popular. Let’s look at the process of logging into the web interface and settings for this adapter.Before setting up, it is necessary to connect the adapter to the TV. Simply plug the adapter itself into an available HDMI input on your TV. The USB cable that powers the adapter can be plugged into a USB port on your TV (like mine). or into the socket through the adapter 5V/1A (with which you charge the phone).

If the picture from the MiraScreen adapter does not appear on your TV, make sure you have selected the correct signal source. We need to select the HDMI input where we plugged the device in. There is usually a separate button on the remote control that you can use to open the source selection menu. It is most often signed as INPUT or SOURCES. The splash screen of our adapter should appear on your TV.

See also  Changing your voice when calling Android

Your TV is broken and you don’t know what to do? Take a quick test to see how best to repair your TV.

How to use AirScreen?

To use AirScreen, first connect all devices to the same Wi-Fi network and open Airscreen. Then find the content you want to use and make sure it’s compatible with ChromeCast. Select media files from Netflix, YouTube, Twitch, HBO, etc. д.

How to connect your Hisense phone to your TV?

  • Go to the connection, then to the connection section or other connection settings
  • There you will discover Miracast or the screen sharing option
  • Your TV will ask you to confirm the connection

How to connect to a TV with an iPhone without a cord?

You’ll be connected in just two clicks. lift the “curtain” at the bottom, press “AirPlay” and select the name AppleTV in the list. Then all the content on the screen can be easily streamed to the TV wirelessly.

To do this, go to the Kodi settings (the gear icon) and open the “Services” item. In the submenu on the left you will find the AirPlay tab, select it. Move the slider to the right of “Enable AirPlay support”.

How to Broadcast from Phone to TV without WI-FI?

If your TV is without Wi-Fi It’s best if your smartphone has USB-C. you just need to buy an adapter for HDMI or VGA (depends on the connectors available on your TV) and connect your phone through it. Usually modern televisions are equipped with HDMI.

  • Press the input button on the Hisense TV remote control, then locate and select Anyview Cast
  • Now your TV is waiting for the Android device to connect.
Denial of responsibility | Contacts |RSS | SE | EN | BR | DE