Accessory not supported by iPhone 7

Normal reconnection of the Lightning cable

It may seem to you that you have properly connected the Lightning cable to your device. We take and pull out the cable from the corresponding connector, inspect it for damage, and then plug it back in again. See if the error “This accessory is probably not supported” is shown on the display and draw conclusions. No, we do not consider you an idiot, but each of us from time to time still finds himself in this kind of situation.

Fraud with the “Close” button (another extraordinary solution)

Another blatantly wacky solution that can surprisingly work. Ok, an error has appeared on the display of your iPhone / iPad. hold down the “Close” button with your finger and disconnect the Lightning cable. And. that’s all you need to do. It is not clear what exactly such a strange manipulation does, but after it the error “This accessory is probably not supported” may disappear, if you believe the messages on the network. Again, try it, because you may be that lucky.

“This accessory is probably not supported”. how to fix?

Reboot iPhone / iPad when charging is connected

We’re not sure if this trick can be called a real solution, but let’s get it straight. Some users, who themselves have encountered this problem, recommend that when an error appears, simply restart their device without disconnecting the Lightning cable from it. You might be thinking, “What is this nonsense? And what should fix it? ” It’s hard to believe in it, but in some cases it is possible to get rid of this error with just such a stupid decision. So again:

  • connect a charger to your iPhone / iPad;
  • wait for the error “This accessory is probably not supported”;
  • restart the device using the power button on the case.

And that’s all. If you’re lucky, this message will disappear and nothing else will interfere with the charging process.

We direct the marafet in the Lightning connector

Ok, let’s get back to more serious and adequate solutions. Your iPhone or iPad’s Lightning connector may be clogged with dust or some other substance. What to do in this case? And everything is simple: we take a thin and oblong object and carefully clean this connector. Our recommendation: take a toothpick and wrap a piece of cotton wool tightly on its very tip. much better than any ear stick. So, take our tool and clean the Lightning connector with light movements. We do not press anything, we do not press anything, we do not poke anything deeply anywhere. adhere to such simple recommendations and no problems will arise. Hovering over the marafet, connect the charger to your device and check if the error “This accessory is probably not supported” appears this time.

How to fix “This accessory is probably not supported” for iPhone and iPad?

“This accessory is probably not supported”. this message can be seen when trying to connect the charger to your iPhone or iPad. Charging a mobile device is a trivial task. What could have gone wrong during this seemingly simple procedure? In today’s article, we will tell you what are the reasons for this alarm message and how you can get rid of it as soon as possible in order to finally charge your Apple device normally.

Potential Reasons for “This accessory is probably not supported.

Most often, there are several reasons for the appearance of this message. and you will not like any of them.

Turn on “Airplane mode”.

First, we have a simple method. Airplane mode turns off all connections that might affect you during flight. So this is a quick fix you can implement.

To get started, swipe down from the top of the screen and click the airplane icon.

Then turn off the device, wait a minute and restart the device. You may have to try different implementations of this to get it working again. For example, try switching airplane mode some time after reboot.

Airplane mode does not disable Bluetooth by default, however. So there is a separate fix for this.

Change or reset settings

Our last step is similar to the Bluetooth method. However, here we have reset all iPhone settings.

To do this, go to “Settings. Are common. Reset “.

This Accessory May Not be Supported error on iPhone 7, 8, X, XS Max and 11 Pro Max in iOS 13/13.4

Try Reset Network Settings first. Note that this will clear all of your internet passwords, so you need to have them handy before proceeding.

Then restart your phone and see if the problem persists. If so, you may have to “Reset All Settings” and reboot your phone one last time. This is a last resort, however, as it will erase virtually all changes you make to your phone. So make a clean backup of your phone before proceeding.

How to fix “This accessory may not be supported” error on iPhone

1 min

When it comes to bugs on your iPhone, you’re usually in good hands. This is because many Apple devices display clear error messages such as “This accessory is not supported.” Thus, it is not difficult to diagnose the problem, but it may take some time to solve it.

This post will discuss how you can resolve the “This accessory is not supported” error. However, we will not cover some of the simpler fixes. We will explain why further.

Reset Bluetooth connection settings.

Your Bluetooth may be causing the “This accessory is not supported” error. However, if you are trying to do this with a wired accessory, most likely this will not be the reason. However, if you are having problems with your Bluetooth accessory, this step may help.

First go to Settings. Bluetooth “on your iPhone.

While you can simply turn off Bluetooth, you’ll probably get better results if you forget your networks. For each connection, tap the Info icon (i) and tap Forget This Device.

When the list is clear, restart your iPhone and re-add the Bluetooth connection.

What you should have tried to fix the “This accessory may not be supported” error

For the uninitiated, the “This accessory may not be supported” error appears when you connect a device such as a headphone or smartwatch to your iPhone. This is often a wired device, although wireless accessories also cause the error.

If you are lucky enough to get this error, Apple has a dedicated KB article with a few simple steps to try. Thus, we do not cover it here. We are also not talking about other very simple fixes like:

  • Updating your device
  • Turn off and turn on the phone
  • Cleaning the accessory connectors
  • Swap cables
accessory, supported, iphone

Instead, we’ll look at three methods to fix the “This accessory is not supported” error that you might not have considered.

How to fix “This accessory may not be supported” error on iPhone

The three methods below are not linear. This way you can choose a solution based on what you already figured out about the error.

Summarizing

Fixing the “This accessory may not be supported” error on iPhone requires many sorting steps to determine the real issue. For example, clearing connections, hard rebooting the device, and more are all needed to hone the problem. From there it will probably be helpful to dig into deeper network settings.

If you are not intimidated by the error, and you still want to use quality accessories, we talked about this in the previous article. Have you ever had the “This accessory is not supported” error, and if so, how did you fix it? Let us know in the comments below!

This accessory is probably not supported by the iPhone.

Let’s see now why you got the message # 171, This accessory is probably not supported by iPhone # 187. Let’s see what to do to make it disappear and what accessories you need to use.

This article is suitable for all models of iPhone XS / XR / X / 8/7/6/5 and Plus on iOS 12. On older versions, the menu items and hardware support indicated in the article may differ or be missing.

  • Reasons for the message “This accessory is probably not supported”
  • Reconnecting the Lightning cable
  • Change USB port on PC or Mac
  • Restarting a gadget with a Lightning cable connected
  • Trick with error message
  • We clean the charging port on the gadget
  • Replacing the Lightning cable

Restarting a gadget with a Lightning cable connected

Some users recommend trying the following steps:

accessory, supported, iphone
  • Connecting the Lightning cable to Afyon.
  • Wait until the error “This accessory is probably not supported” appears on the display again.
  • Reboot the device with the connected charging cable.
  • When the devices turn on, check for an error.

In a similar tricky way, users work around this problem.

iPhone restarts itself intermittently or cyclically

Reconnecting the Lightning cable

In most cases, the problem is very easy to fix. To do this, you need to reconnect your device to the Lightning cable several times to try to get rid of this error. In practice, users see that after several reconnections of charging to an iPad or iPhone device, this error disappears.

Trick with error message

We connect the Lightning cable to the Apple device and wait for the error to appear. When the error message is displayed, on the display you must press the “Close” button and hold your finger on it, and then disconnect the Lightning cable from the device.

Then we reconnect and check if we managed to fix the problem. This method does not often help, but it may work.

We clean the charging port on the gadget

The cause of the error may be due to a dirty iPhone charging port. The problem is solved by simply clearing the connection port.

We take a paper clip and try to carefully clean the Lightning connector on the gadget from all the debris that may be there. There is a possibility that dust has collected there or that something has got there and prevents the correct connection with the device.

After cleaning, try connecting the Lightning cable to the iPhone again. It is pollution that has become one of the most common causes of this problem. If it’s not a dirty connector, the problems can be serious.

Reasons for the message “This accessory is probably not supported

An error on the smartphone screen is displayed in situations when the user tries to connect an accessory to the gadget through the charging port (Lightning). There may be several reasons for this error:

  • IPhone software crashed.
  • Accessory lacks MFi certification.
  • Lightning port on iPhone is broken, damaged, or dirty.
  • The gadget is broken, dirty or damaged.
  • The accessory you are trying to connect is broken, damaged, or stained.

Let’s take a look at the steps to follow to determine the cause of the error and fix it.

iPhone shows battery charge incorrectly

Change USB port on PC or Mac

If the error “This accessory is probably not supported” appears when you connect your iPhone to your PC or Mac, then a faulty USB port could be the cause of the problem. Apple’s gadget should be plugged into a different USB port and see what happens. If the error disappears when connecting, then there is a chance that the problem is directly related to the USB port on the MacBook or on the computer.

Reconnecting the Lightning cable

In most cases, the problem is very easy to fix. To do this, you need to reconnect your device to the Lightning cable several times to try to get rid of this error. In practice, users see that after several reconnections of charging to an iPad or iPhone device, this error disappears.

Reasons for the message “This accessory is probably not supported

Let’s take a look at the steps to follow to determine the cause of the error and fix it.

Restarting a gadget with a Lightning cable connected

Some users recommend trying the following steps:

This accessory is probably not supported by the iPhone.

Let’s now figure out why you got the message “This accessory is probably not supported by the iPhone.” Let’s see what to do to make it disappear and what accessories you need to use.

This article is suitable for all iPhone 11 / XS (r) / X / 8/7/6 and Plus models on iOS 13. Older versions may have different or missing menu items and hardware support specified in the article.

“This Accessory May Not Be Supported” �� [FINALLY FIXED!!]

  • Reasons for the message “This accessory is probably not supported”
  • Reconnecting the Lightning cable
  • Change USB port on PC or Mac
  • Restarting a gadget with a Lightning cable connected
  • Trick with error message
  • We clean the charging port on the gadget
  • Replacing the Lightning cable

Change USB port on PC or Mac

If the error “This accessory is probably not supported” appears when you connect your iPhone to your PC or Mac, then a faulty USB port could be the cause of the problem. Apple’s gadget should be plugged into a different USB port and see what happens. If the error disappears when connecting, then there is a chance that the problem is directly related to the USB port on the MacBook or on the computer.

Trick with error message

We connect the Lightning cable to the Apple device and wait for the error to appear. When the error message is displayed, on the display you must press the “Close” button and hold your finger on it, and then disconnect the Lightning cable from the device.

Then we reconnect and check if we managed to fix the problem. This method does not often help, but it may work.

We clean the charging port on the gadget

The cause of the error may be due to a dirty iPhone charging port. The problem is solved by simply clearing the connection port.

We take a paper clip and try to carefully clean the Lightning connector on the gadget from all the debris that may be there. There is a possibility that dust has collected there or that something has got there and prevents the correct connection with the device.

After cleaning, try connecting the Lightning cable to the iPhone again. It is pollution that has become one of the most common causes of this problem. If it’s not a dirty connector, the problems can be serious.

This accessory is probably not supported. What to do?

It is not uncommon for every iPhone or iPad owner to have a problem when connecting a device to a charger using a USB Lightning cable, which informs the following: “This cable is not certified, and its reliability is not guaranteed” or “This accessory is probably not supported.” You have a question: “what to do with it?”.

Even the original Apple Lightning cable can be the reason for the device that is not supported, but in most cases, such a problem occurs due to the use of a cheap Chinese cable that does not have a quality certificate.

Apple devices running iOS 7 have learned to recognize and identify non-original Lightning accessories. At first, this OS simply warned that the “accessory was not certified”, but with the release of the Gold Master iOS 7 version, it began to block the use of such devices. And this does not make it possible to use cheaper cables and docking stations.

You will be able to charge your iPhone with an unofficial Lightning cable using a special tweak from Cydia. To do this, you need to take just a few steps:

Need to jailbreak with Evasi0n7;
2. You need to start Cydia from the home screen, then wait for the repositories to update;
3. You need to go to the Manage tab and click the Source button;
4. You need to click Edit and Add, enter the address. http://parrotgeek.net/repo, then click Add Source. Cydia will automatically pick up data from the repository;
5. You need to go to the Search tab and find a tweak named Unauthorized Lightning Cable Enabler;
6. It is necessary to do a respring for these changes to take effect. Now you can use any additional accessory.

In addition to problems that may arise due to the operating system, an error with an unsupported device can also be generated by a malfunction of your USB Lightning cable.

Or it may be that the problem is not in the cable at all, but in the Lightning connector itself. Dust, moisture, crumbs, or other dirt may have gotten on the connector.

The main causes of incompatibilities

There are many reasons why an accessory is not supported by the iPhone and a notification appears. The most common ones are:

  • Broken cable contacts. If the cord has been used for a very long time, then it may simply be damaged or severely bent. Even original accessories from Apple sooner or later become unusable. Often the user is to blame for this, but if the phone has been used for more than one year, then this device could be damaged due to the banal aging process. If the damage is visible to the naked eye, then the problem is definitely in the USB cable. If the gap is imperceptible, then it is likely that the reason lies in something else. You can check the cable for a break by connecting it to another phone or testing it with a multimeter.
  • Damage to the USB port to which you are connecting. Very often this happens due to the fact that the port constantly accepts various cables, flash drives and other drives. It can fail, become loose, and lose contact with the motherboard. In addition, it may be contaminated with dust and dirt, foreign bodies that interfere with the passage of electric current through the cable.

An error indicating that the accessory is not supported by the iPhone appears quite rarely

  • Using a non-original Chinese accessory that was purchased from an unreliable manufacturer. Chargers and cables purchased on the market and from an unauthorized supplier can cause the phone to simply not see them or, in the worst case, fail. Often, such wires are made anyhow and do not shine with quality or reliability. They may break the very next day or after a few days. If the cord is cheap, then it’s okay, but if it harmed the phone, you will have to contact the service center.
  • Dirty or damaged connectors on the mobile device itself. The same problems as with the USB port on a computer can occur with the charging connector on the phone. It can also become clogged with dust, dirt, lint, or simply lose contact.

Important! The solution to a problem depends on its source. It is necessary to carry out a set of measures that will be aimed at eliminating it.

“This accessory is probably not supported” error on iPhone 6 occurs with incompatibilities

This accessory is probably not supported by the iPhone. how to fix

Sometimes, when a person needs to charge his device from Apple, he may be faced with the fact that a message is displayed on the phone display that this iPhone cannot work with the connected device and does not support it. This happens when the iPhone is connected to a charger or PC via the “Light” connector. The article will explain how to solve the error “This accessory is probably not supported by the iPhone.”.

Using a non-original and non-certified USB cable

Often people want to save money, and when the original charger or USB cable breaks down, they purchase their cheap counterparts from China. It won’t end well. In many cases, phones simply do not support the old charging or data transfer methods that are used on non-certified accessories. Sometimes it is even possible that the power connector of the device breaks down or even destroys it.

Some high-quality substitutes can really work well and for a long time, but in most cases a cable bought on the market for 100 rubles under the guise of an original will not bring anything good to the gadget.

If there is obvious damage on the charger cable, then it is all to blame

Other possible methods

Another method is to test the cable itself. He most often has the following problems:

You can also update the software through the iTunes service on your computer.

OS update

If the problem is not caused by mechanical factors, but by a software malfunction, then it is recommended to update the iOS operating system to the latest update. The new firmware could well solve the problems that prevent you from connecting to certain devices using a certain type of cable.

accessory, supported, iphone

Before the actual update, experts recommend creating a backup of all important files to the cloud or iTunes. It is also advisable not to forget to back up the operating system itself.

The update can be done in three ways:

  • Through the Internet. To do this, go to the iPhone settings, select the “General” item and click on “Software Update”. If the components are available, then they will be installed with the consent of the user.
  • Via iTunes. This method does not imply a mobile network or Wi-Fi connection, as it is performed from a PC. To complete it, you need to connect your phone to your computer, launch iTunes and go to the “Overview” section, where the “Update” option is selected. All that remains is to wait and follow the instructions on the screen.
  • Automatic update. It is recommended to always agree with the operating system if it offers to install the update automatically. This allows you to avoid many problems and bugs that are inherent in older versions of the OS.

You can enable auto-update as follows:

  • Go to “Options”.
  • Select the section “Basic parameters”, then the subsection “Update”, which will be the item “Auto update”. It must be put into an active state.

Updating the software helps solve the problem of incompatibilities

Reconnecting

Very often, the error can be solved by a couple of reconnections of the device from the USB cable. Contact elements could come off the cord, or a speck of dust appeared in the connector, which interfered with the passage of electric current and the creation of a connection. The same actions will help to cope with the problem when there are places on the cable with poor-quality conductor contact.

Important! Although such actions do not always help, they do not take very long. That is why you need to start any troubleshooting and troubleshooting with them.

If the iPhone does not support a charger, then you can try restarting the gadget.

Cleaning and checking the connector

A notification about the inability to connect may also appear due to dust or other foreign particles entering the connector on the phone. If the reason lies in this, then it will be very simple to solve it, but you need to act carefully.

With serious contamination, not only can the contact be broken, but it is quite likely that a breakdown will occur due to the bent elements of the connector tongue. Contaminants could get into the phone from a or when using it in a dusty room, for example, at a factory.

The cleaning process is carried out in two steps:

  • Take a sharp, but not metallic object, such as a toothpick. It is inserted into the connector and gently removed lumps of dust or other contaminants. When most of the debris has been removed, you need to blow out the hole for the cable.
  • The same toothpick is wrapped in thin layers of cotton wool or gauze, which has been slightly moistened in an alcohol-containing solution (cologne or special means) and pushed into the same hole. With light and gentle movements, the remaining dirt is collected.

Important! Cleaning can also be done with a USB cable or a port on a personal computer. There is a great chance that these details were the cause of the error.

An error that appears against the background of the cable connection can signal poor contact